summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igc/igc_ethtool.c
AgeCommit message (Collapse)Author
2025-07-18igc: Add wildcard rule support to ethtool NFC using Default QueueSong Yoong Siang
Introduce support for a lowest priority wildcard (catch-all) rule in ethtool's Network Flow Classification (NFC) for the igc driver. The wildcard rule directs all unmatched network traffic, including traffic not captured by Receive Side Scaling (RSS), to a specified queue. This functionality utilizes the Default Queue feature available in I225/I226 hardware. The implementation has been validated on Intel ADL-S systems with two back-to-back connected I226 network interfaces. Testing Procedure: 1. On the Device Under Test (DUT), verify the initial statistic: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 0 rx_queue_1_packets: 0 rx_queue_2_packets: 0 rx_queue_3_packets: 0 2. From the Link Partner, send 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 3. On the DUT, verify the packet reception on Queue 0: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 10 rx_queue_1_packets: 0 rx_queue_2_packets: 0 rx_queue_3_packets: 0 4. On the DUT, add a wildcard rule to route all packets to Queue 3: $ sudo ethtool -N enp1s0 flow-type ether queue 3 5. From the Link Partner, send another 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 6. Now, packets are routed to Queue 3 by the wildcard (Default Queue) rule: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 10 rx_queue_1_packets: 0 rx_queue_2_packets: 0 rx_queue_3_packets: 10 7. On the DUT, add a EtherType rule to route ARP packet to Queue 1: $ sudo ethtool -N enp1s0 flow-type ether proto 0x0806 queue 1 8. From the Link Partner, send another 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 9. Now, packets are routed to Queue 1 by the EtherType rule because it is higher priority than the wildcard (Default Queue) rule: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 10 rx_queue_1_packets: 10 rx_queue_2_packets: 0 rx_queue_3_packets: 10 10. On the DUT, delete all the NFC rules: $ sudo ethtool -N enp1s0 delete 63 $ sudo ethtool -N enp1s0 delete 64 11. From the Link Partner, send another 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 12. Now, packets are routed to Queue 0 because the value of Default Queue is reset back to 0: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 20 rx_queue_1_packets: 10 rx_queue_2_packets: 0 rx_queue_3_packets: 10 Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Co-developed-by: Blanco Alcaine Hector <hector.blanco.alcaine@intel.com> Signed-off-by: Blanco Alcaine Hector <hector.blanco.alcaine@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-17Merge branch 'intel-next-queue-1GbE'Paolo Abeni
Tony Nguyen says: ==================== Faizal Rahim says: MAC Merge support for frame preemption was previously added for igc: https://lore.kernel.org/netdev/20250418163822.3519810-1-anthony.l.nguyen@intel.com/ This series builds on that work and adds support for: - Harmonizing taprio and mqprio queue priority behavior, based on past discussions and suggestions: https://lore.kernel.org/all/20250214102206.25dqgut5tbak2rkz@skbuf/ - Enabling preemptible queue support for both taprio and mqprio, with priority harmonization as a prerequisite. Patch organization: - Patches 1-3: Preparation work for patches 6 and 7 - Patches 4-5: Queue priority harmonization - Patches 6-7: Add preemptible queue support ==================== Link: https://patch.msgid.link/20250611180314.2059166-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-16eth: igc: migrate to new RXFH callbacksJakub Kicinski
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool: add dedicated callbacks for getting and setting rxfh fields"). Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Joe Damato <joe@dama.to> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250614180907.4167714-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11igc: add private flag to reverse TX queue priority in TSN modeFaizal Rahim
By default, igc assigns TX hw queue 0 the highest priority and queue 3 the lowest. This is opposite of most NICs, where TX hw queue 3 has the highest priority and queue 0 the lowest. mqprio in igc already uses TX arbitration unconditionally to reverse TX queue priority when mqprio is enabled. The TX arbitration logic does not require a private flag, because mqprio was added recently and no known users depend on the default queue ordering, which differs from the typical convention. taprio does not use TX arbitration, so it inherits the default igc TX queue priority order. This causes tc command inconsistencies when configuring frame preemption with taprio compared to mqprio in igc. Other tc command inconsistencies and configuration issues already exist when using taprio on igc compared to other network controllers. These issues are described in a later section. To harmonize TX queue priority behavior between taprio and mqprio, and to fix these issues without breaking long-standing taprio use cases, this patch adds a new private flag, called reverse-tsn-txq-prio, to reverse the TX queue priority. It makes queue 3 the highest and queue 0 the lowest, reusing the TX arbitration logic already used by mqprio. Users must set the private flag when enabling frame preemption with taprio to follow the standard convention. Doing so promotes adoption of the correct priority model for new features while preserving compatibility with legacy configurations. This new private flag addresses: 1. Non-standard socket -> tc -> TX hw queue mapping for taprio in igc Without the private flag: - taprio maps (socket -> tc -> TX hardware queue) differently on igc compared to other network controllers - On igc, mqprio maps tc differently from taprio, since mqprio already uses TX arbitration The following examples compare taprio configuration on igc and other network controllers: a) On other NICs (TX hw queue 3 is highest priority): taprio num_tc 4 map 0 1 2 3 .... \ queues 1@0 1@1 1@2 1@3 Mapping translates to: socket 0 -> tc 0 -> queue 0 socket 3 -> tc 3 -> queue 3 This is the normal mapping that respects the standard convention: higher socket number -> higher tc -> higher priority TX hw queue b) On igc (TX hw queue 0 is highest priority by default): taprio num_tc 4 map 3 2 1 0 .... \ queues 1@0 1@1 1@2 1@3 Mapping translates to: socket 0 -> tc 3 -> queue 3 socket 3 -> tc 0 -> queue 0 This igc tc mapping example is based on Intel's TSN validation test case, where a higher socket priority maps to a higher priority queue. It respects the mapping: higher socket number -> higher priority TX hw queue but breaks the expected ordering: higher tc -> higher priority TX hw queue as defined in [Ref1]. This custom mapping complicates common taprio setup across NICs. 2. Non-standard frame preemption mapping for taprio in igc Without the private flag: - Compared to other network controllers, taprio on igc must flip the expected fp sequence, since express traffic is expected to map to the highest priority queue and preemptible traffic to lower ones - On igc, frame preemption configuration for mqprio differs from taprio, since mqprio already uses TX arbitration The following examples compare taprio frame preemption configuration on igc and other network controllers: a) On other NICs (TX hw queue 3 is highest priority): taprio num_tc 4 map ..... \ queues 1@0 1@1 1@2 1@3 \ fp P P P E Mapping translates to: tc0, tc1, tc2 -> preemptible -> queue 0, 1, 2 tc3 -> express -> queue 3 This is the normal mapping that respects the standard convention: higher tc -> express traffic -> higher priority TX hw queue lower tc -> preemptible traffic -> lower priority TX hw queue b) On igc (TX hw queue 0 is highest priority by default): taprio num_tc 4 map ...... \ queues 1@0 1@1 1@2 1@3 \ fp E P P P Mapping translates to: tc0 -> express -> queue 0 tc1, tc2, tc3 -> preemptible -> queue 1, 2, 3 This inversion respects the mapping of: express traffic -> higher priority TX hw queue but breaks the expected ordering: higher tc -> express traffic as defined in [Ref1] where higher tc indicates higher priority. In this case, the lower tc0 is assigned to express traffic. This custom mapping further complicates common preemption setup across NICs. Tests were performed on taprio with the following combinations, where two apps send traffic simultaneously on different queues: Private Flag Traffic Sent By Traffic Sent By ---------------------------------------------------------------- enabled iperf3 (queue 3) iperf3 (queue 0) disabled iperf3 (queue 0) iperf3 (queue 3) enabled iperf3 (queue 3) real-time app (queue 0) disabled iperf3 (queue 0) real-time app (queue 3) enabled real-time app (queue 3) iperf3 (queue 0) disabled real-time app (queue 0) iperf3 (queue 3) enabled real-time app (queue 3) real-time app (queue 0) disabled real-time app (queue 0) real-time app (queue 3) Private flag is controlled with: ethtool --set-priv-flags enp1s0 reverse-tsn-txq-prio <on|off> [Ref1] IEEE 802.1Q clause 8.6.8 Transmission selection: "For a given Port and traffic class, frames are selected from the corresponding queue for transmission if and only if: ... b) For each queue corresponding to a numerically higher value of traffic class supported by the Port, the operation of the transmission selection algorithm supported by that queue determines that there is no frame available for transmission." Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-18igc: add support to get frame preemption statistics via ethtoolFaizal Rahim
Implemented "ethtool --include-statistics --show-mm" callback for IGC. Tested preemption scenario to check preemption statistics: 1) Trigger verification handshake on both boards: $ sudo ethtool --set-mm enp1s0 pmac-enabled on $ sudo ethtool --set-mm enp1s0 tx-enabled on $ sudo ethtool --set-mm enp1s0 verify-enabled on 2) Set preemptible or express queue in taprio for tx board: $ sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \ num_tc 4 map 3 2 1 0 3 3 3 3 3 3 3 3 3 3 3 3 \ queues 1@0 1@1 1@2 1@3 base-time 0 sched-entry S F 100000 \ fp E E P P 3) Send large size packets on preemptible queue 4) Send small size packets on express queue to preempt packets in preemptible queue 5) Show preemption statistics on the receiving board: $ ethtool --include-statistics --show-mm enp1s0 MAC Merge layer state for enp1s0: pMAC enabled: on TX enabled: on TX active: on TX minimum fragment size: 64 RX minimum fragment size: 60 Verify enabled: on Verify time: 128 Max verify time: 128 Verification status: SUCCEEDED Statistics: MACMergeFrameAssErrorCount: 0 MACMergeFrameSmdErrorCount: 0 MACMergeFrameAssOkCount: 511 MACMergeFragCountRx: 764 MACMergeFragCountTx: 0 MACMergeHoldCount: 0 Co-developed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Co-developed-by: Chwee-Lin Choong <chwee.lin.choong@intel.com> Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-18igc: add support to get MAC Merge data via ethtoolFaizal Rahim
Implement "ethtool --show-mm" callback for IGC. Tested with command: $ ethtool --show-mm enp1s0. MAC Merge layer state for enp1s0: pMAC enabled: on TX enabled: on TX active: on TX minimum fragment size: 64 RX minimum fragment size: 60 Verify enabled: on Verify time: 128 Max verify time: 128 Verification status: SUCCEEDED Verified that the fields value are retrieved correctly. Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-18igc: add support to set tx-min-frag-sizeFaizal Rahim
Add support for setting tx-min-frag-size via the set_mm callback in igc. If the requested value is unsupported, round it up to the smallest supported i226 size (64, 128, 192, 256) and send a netlink message to inform the user. Co-developed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-18igc: add support for frame preemption verificationFaizal Rahim
This patch implements the "ethtool --set-mm" callback to trigger the frame preemption verification handshake. Uses the MAC Merge Software Verification (mmsv) mechanism in ethtool to perform the verification handshake for igc. The structure fpe.mmsv is set by mmsv in ethtool and should remain read-only for the driver. Other mmsv callbacks: a) configure_tx() -> not used yet at this point - igc lacks registers to configure FPE in the transmit direction, so this API is not utilized for now. When igc supports preemptible queue, driver will use this API to manage its configuration. b) configure_pmac() -> not used - this callback dynamically controls pmac_enabled at runtime. For example, mmsv calls configure_pmac() and disables pmac_enabled when the link partner goes down, even if the user previously enabled it. The intention is to save power but it is not feasible in igc because it causes an endless adapter reset loop: 1) Board A and Board B complete the verification handshake. Tx mode register for both boards are in TSN mode. 2) Board B link goes down. On Board A: 3) mmsv calls configure_pmac() with pmac_enabled = false. 4) configure_pmac() in igc updates a new field based on pmac_enabled. Driver uses this field in igc_tsn_new_flags() to indicate that the user enabled/disabled FPE. 5) configure_pmac() in igc calls igc_tsn_offload_apply() to check whether an adapter reset is needed. Calls existing logic in igc_tsn_will_tx_mode_change() and igc_tsn_new_flags(). 6) Since pmac_enabled is now disabled and no other TSN feature is active, igc_tsn_will_tx_mode_change() evaluates to true because Tx mode will switch from TSN to Legacy. 7) Driver resets the adapter. 8) Registers are set, and Tx mode switches to Legacy. 9) When link partner is up, steps 3-8 repeat, but this time with pmac_enabled = true, reactivating TSN. igc_tsn_will_tx_mode_change() evaluates to true again, since Tx mode will switch from Legacy to TSN. 10) Driver resets the adapter. 11) Adapter reset completes, registers are set, and Tx mode switches to TSN. On Board B: 12) Adapter reset on Board A at step 10 causes it to detect its link partner as down. 13) Repeats steps 3-8. 14) Once reset adapter on Board A is completed at step 11, it detects its link partner as up. 15) Repeats steps 9-11. - this cycle repeats indefinitely. To avoid this issue, igc only uses mmsv.pmac_enabled to track whether FPE is enabled or disabled. Co-developed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Co-developed-by: Chwee-Lin Choong <chwee.lin.choong@intel.com> Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-11-13igc: remove autoneg parameter from igc_mac_infoVitaly Lifshits
Since the igc driver doesn't support forced speed configuration and its current related hardware doesn't support it either, there is no use of the mac.autoneg parameter. Moreover, in one case this usage might result in a NULL pointer dereference due to an uninitialized function pointer, phy.ops.force_speed_duplex. Therefore, remove this parameter from the igc code. Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06igc: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-30igc: Add Energy Efficient Ethernet abilitySasha Neftin
According to the IEEE standard report the EEE ability (registers 7.60 and 7.62) and the EEE Link Partner ability (registers 7.61 and 7.63). Use the kernel's 'ethtool_keee' structure and report EEE link modes. Example: ethtool --show-eee <device> Before: Advertised EEE link modes: Not reported Link partner advertised EEE link modes: Not reported After: Advertised EEE link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full Link partner advertised EEE link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-30igc: Add MQPRIO offload supportKurt Kanzenbach
Add support for offloading MQPRIO. The hardware has four priorities as well as four queues. Each queue must be a assigned with a unique priority. However, the priorities are only considered in TSN Tx mode. There are two TSN Tx modes. In case of MQPRIO the Qbv capability is not required. Therefore, use the legacy TSN Tx mode, which performs strict priority arbitration. Example for mqprio with hardware offload: |tc qdisc replace dev ${INTERFACE} handle 100 parent root mqprio num_tc 4 \ | map 0 0 0 0 0 1 2 3 0 0 0 0 0 0 0 0 \ | queues 1@0 1@1 1@2 1@3 \ | hw 1 The mqprio Qdisc also allows to configure the `preemptible_tcs'. However, frame preemption is not supported yet. Tested on Intel i225 and implemented by following data sheet section 7.5.2, Transmit Scheduling. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-15Merge branch 'net-make-timestamping-selectable'Jakub Kicinski
First part of "net: Make timestamping selectable" from Kory Maincent. Change the driver-facing type already to lower rebasing pain. Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: Add struct kernel_ethtool_ts_infoKory Maincent
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-11igc: Remove the internal 'eee_advert' fieldSasha Neftin
Since the kernel's 'ethtool_keee' structure is in use, the internal 'eee_advert' field becomes pointless and can be removed. This patch comes to clean up this redundant code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-05igc: Fix Energy Efficient Ethernet support declarationSasha Neftin
The commit 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate ethtool_keee structure initialization. When "ethtool --show <device>" (get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden. Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE specification that allows reporting Energy Efficient Ethernet capabilities. Examples: Before fix: ethtool --show-eee enp174s0 EEE settings for enp174s0: EEE status: not supported After fix: EEE settings for enp174s0: EEE status: disabled Tx LPI: disabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full Fixes: 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-08igc: Remove redundant runtime resume for ethtool opsBjorn Helgaas
8c5ad0dae93c ("igc: Add ethtool support") added ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to resume suspended devices before any ethtool_ops callback and allow suspend after it completed. Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path, so the device is resumed before any ethtool_ops callback even if the driver didn't supply a .begin() callback. Remove the .begin() and .complete() callbacks, which are now redundant because dev_ethtool() already resumes the device. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-28net: intel: igc: Use linkmode helpers for EEEAndrew Lunn
Make use of the existing linkmode helpers for converting PHY EEE register values into links modes, now that ethtool_keee uses link modes, rather than u32 values. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28net: intel: i40e/igc: Remove setting Autoneg in EEE capabilitiesAndrew Lunn
Energy Efficient Ethernet should always be negotiated with the link peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for supported, advertised or lp_advertised, since it is assumed. Additionally, ethtool(1) ignores the set bit, and no other driver sets this. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-07igc: Unify filtering rule fieldsKurt Kanzenbach
All filtering parameters such as EtherType and VLAN TCI are stored in host byte order except for the VLAN EtherType. Unify it. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-31ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keeeHeiner Kallweit
This is in preparation of using the existing names for linkmode bitmaps. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()") 0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL") https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-27igc: Check VLAN EtherType maskKurt Kanzenbach
Currently the driver accepts VLAN EtherType steering rules regardless of the configured mask. And things might fail silently or with confusing error messages to the user. The VLAN EtherType can only be matched by full mask. Therefore, add a check for that. For instance the following rule is invalid, but the driver accepts it and ignores the user specified mask: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |rmgr: Cannot insert RX class rule: Operation not supported Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops") Suggested-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27igc: Check VLAN TCI maskKurt Kanzenbach
Currently the driver accepts VLAN TCI steering rules regardless of the configured mask. And things might fail silently or with confusing error messages to the user. There are two ways to handle the VLAN TCI mask: 1. Match on the PCP field using a VLAN prio filter 2. Match on complete TCI field using a flex filter Therefore, add checks and code for that. For instance the following rule is invalid and will be converted into a VLAN prio rule which is not correct: |root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \ | action 1 |Added rule with ID 61 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 61 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x0 mask: 0xffff | VLAN: 0x1 mask: 0x1fff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 1 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \ | action 1 |rmgr: Cannot insert RX class rule: Operation not supported Fixes: 7991487ecb2d ("igc: Allow for Flex Filters to be installed") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27igc: Report VLAN EtherType matching back to userKurt Kanzenbach
Currently the driver allows to configure matching by VLAN EtherType. However, the retrieval function does not report it back to the user. Add it. Before: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | Action: Direct to queue 0 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0 Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-13net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08net: Convert some ethtool_sprintf() to ethtool_puts()justinstitt@google.com
This patch converts some basic cases of ethtool_sprintf() to ethtool_puts(). The conversions are used in cases where ethtool_sprintf() was being used with just two arguments: | ethtool_sprintf(&data, buffer[i].name); or when it's used with format string: "%s" | ethtool_sprintf(&data, "%s", buffer[i].name); which both now become: | ethtool_puts(&data, buffer[i].name); Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/mac80211/rx.c 91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames") 6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value") Adjacent changes: drivers/net/ethernet/apm/xgene/xgene_enet_main.c 61471264c018 ("net: ethernet: apm: Convert to platform remove callback returning void") d2ca43f30611 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF") net/vmw_vsock/virtio_transport.c 64c99d2d6ada ("vsock/virtio: support to send non-linear skb") 53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-20igc: Fix ambiguity in the ethtool advertisingSasha Neftin
The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to advertise 2500M speed support and TP (twisted pair) properly. Convert to 'ethtool_link_ksettings_test_link_mode' to advertise supported speed and eliminate ambiguity. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231019203641.3661960-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-18intel: fix format warningsJesse Brandeburg
Get ahead of the game and fix all the -Wformat=2 noted warnings in the intel drivers directory. There are one set of i40e and iavf warnings I couldn't figure out how to fix because the driver is already using vsnprintf without an explicit "const char *" format string. Tested with both gcc-12 and clang-15. I found gcc-12 runs clean after this series but clang-15 is a little worried about the vsnprintf lines. summary of warnings: drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c:148:34: warning: format string is not a string literal [-Wformat-nonliteral] drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/iavf/iavf_ethtool.c:199:34: warning: format string is not a string literal [-Wformat-nonliteral] drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/i40e/i40e_ethtool.c:208:34: warning: format string is not a string literal [-Wformat-nonliteral] drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: note: treat the string as an argument to avoid this drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security] drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: note: treat the string as an argument to avoid this Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231017190411.2199743-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-21igc: Expose tx-usecs coalesce setting to userMuhammad Husaini Zulkifli
When users attempt to obtain the coalesce setting using the ethtool command, current code always returns 0 for tx-usecs. This is because I225/6 always uses a queue pair setting, hence tx_coalesce_usecs does not return a value during the igc_ethtool_get_coalesce() callback process. The pair queue condition checking in igc_ethtool_get_coalesce() is removed by this patch so that the user gets information of the value of tx-usecs. Even if i225/6 is using queue pair setting, there is no harm in notifying the user of the tx-usecs. The implementation of the current code may have previously been a copy of the legacy code i210. Since I225 has the queue pair setting enabled, tx-usecs will always adhere to the user-set rx-usecs value. An error message will appear when the user attempts to set the tx-usecs value for the input parameters because, by default, they should only set the rx-usecs value. This patch also adds the helper function to get the previous rx coalesce value similar to tx coalesce. How to test: User can get the coalesce value using ethtool command. Example command: Get: ethtool -c <interface> Previous output: rx-usecs: 3 rx-frames: n/a rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 0 tx-frames: n/a tx-usecs-irq: n/a tx-frames-irq: n/a New output: rx-usecs: 3 rx-frames: n/a rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 3 tx-frames: n/a tx-usecs-irq: n/a tx-frames-irq: n/a Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230919170331.1581031-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-05igc: set TP bit in 'supported' and 'advertising' fields of ↵Prasad Koya
ethtool_link_ksettings set TP bit in the 'supported' and 'advertising' fields. i225/226 parts only support twisted pair copper. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Prasad Koya <prasad@arista.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-07igc: Add qbv_config_change_errors counterMuhammad Husaini Zulkifli
Add ConfigChangeError(qbv_config_change_errors) when user try to set the AdminBaseTime to past value while the current GCL is still running. The ConfigChangeError counter should not be increased when a gate control list is scheduled into the future. User can use "ethtool -S <interface> | grep qbv_config_change_errors" command to check the counter values. Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).Thomas Gleixner
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-16igc: Make flex filter more flexibleKurt Kanzenbach
Currently flex filters are only used for filters containing user data. However, it makes sense to utilize them also for filters having multiple conditions, because that's not supported by the driver at the moment. Add it. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16igc: Allow for Flex Filters to be installedVinicius Costa Gomes
Allows Flex Filters to be installed. The previous restriction to the types of filters that can be installed can now be lifted. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16igc: Integrate flex filter into ethtool opsKurt Kanzenbach
Use the flex filter mechanism to extend the current ethtool filter operations by intercoperating the user data. This allows to match eight more bytes within a Ethernet frame in addition to macs, ether types and vlan. The matching pattern looks like this: * dest_mac [6] * src_mac [6] * tpid [2] * vlan tci [2] * ether type [2] * user data [8] This can be used to match Profinet traffic classes by FrameID range. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-04igc: Update driver to use ethtool_sprintfSasha Neftin
Complete to commit c8d4725e985d ("intel: Update drivers to use ethtool_sprintf") Update the igc driver to make use of ethtool_sprintf. The general idea is to reduce code size and overhead by replacing the repeated pattern of string printf statements and ETH_STRING_LEN counter increments. Suggested-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26intel: remove checker warningJesse Brandeburg
The sparse checker (C=2) found an assignment where we were mixing types when trying to convert from data read directly from the device NVM, to an array in CPU order in-memory, which unfortunately the driver tries to do in-place. This is easily solved by using the swap operation instead of an assignment, and is already proven in other Intel drivers to be functionally correct and the same code, just without a sparse warning. The change is the same in all three drivers. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-16igc: Expose LPI countersSasha Neftin
Expose EEE Tx and Rx low power idle counters via ethtool A EEE TX or RX LPI event occurs when the transmitter or the receiver enters EEE (IEEE802.3az) LPI state. ethtool --statistics <iface> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-11igc: Fix Supported Pause Frame Link SettingMuhammad Husaini Zulkifli
The Supported Pause Frame always display "No" even though the Advertised pause frame showing the correct setting based on the pause parameters via ethtool. Set bit in link_ksettings to "Supported" for Pause Frame. Before output: Supported pause frame use: No Expected output: Supported pause frame use: Symmetric Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Malli C <mallikarjuna.chilakala@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-11igc: Fix Pause Frame AdvertisingMuhammad Husaini Zulkifli
Fix Pause Frame Advertising when getting the advertisement via ethtool. Remove setting the "advertising" bit in link_ksettings during default case when Tx and Rx are in off state with Auto Negotiate off. Below is the original output of advertisement link during Tx and Rx off: Advertised pause frame use: Symmetric Receive-only Expected output: Advertised pause frame use: No Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Malli C <mallikarjuna.chilakala@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Prefer strscpy over strlcpySasha Neftin
Use the strscpy method instead of strlcpy method. See: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr _i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Expose the gPHY firmware versionSasha Neftin
Extend reporting of NVM image version to include the gPHY (i225 PHY) firmware version. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Expose the NVM versionSasha Neftin
Expose the NVM map version via drvinfo in ethtool NVM image version is reported as firmware version for i225 device Minor typo fix - remove space Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03igc: Remove igc_set_fw_version commentSasha Neftin
i225 device not supported and do not plan to support configuration of fw version string for ethtool Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01igc: Report speed and duplex as unknown when device is runtime suspendedKai-Heng Feng
Similar to commit 165ae7a8feb5 ("igb: Report speed and duplex as unknown when device is runtime suspended"), if we try to read speed and duplex sysfs while the device is runtime suspended, igc will complain and stops working: [ 123.449883] igc 0000:03:00.0 enp3s0: PCIe link lost, device now detached [ 123.450052] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 123.450056] #PF: supervisor read access in kernel mode [ 123.450058] #PF: error_code(0x0000) - not-present page [ 123.450059] PGD 0 P4D 0 [ 123.450064] Oops: 0000 [#1] SMP NOPTI [ 123.450068] CPU: 0 PID: 2525 Comm: udevadm Tainted: G U W OE 5.10.0-1002-oem #2+rkl2-Ubuntu [ 123.450078] RIP: 0010:igc_rd32+0x1c/0x90 [igc] [ 123.450080] Code: c0 5d c3 b8 fd ff ff ff c3 0f 1f 44 00 00 0f 1f 44 00 00 55 89 f0 48 89 e5 41 56 41 55 41 54 49 89 c4 53 48 8b 57 08 48 01 d0 <44> 8b 28 41 83 fd ff 74 0c 5b 44 89 e8 41 5c 41 5d 4 [ 123.450083] RSP: 0018:ffffb0d100d6fcc0 EFLAGS: 00010202 [ 123.450085] RAX: 0000000000000008 RBX: ffffb0d100d6fd30 RCX: 0000000000000000 [ 123.450087] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff945a12716c10 [ 123.450089] RBP: ffffb0d100d6fce0 R08: ffff945a12716550 R09: ffff945a09874000 [ 123.450090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000008 [ 123.450092] R13: ffff945a12716000 R14: ffff945a037da280 R15: ffff945a037da290 [ 123.450094] FS: 00007f3b34c868c0(0000) GS:ffff945b89200000(0000) knlGS:0000000000000000 [ 123.450096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 123.450098] CR2: 0000000000000008 CR3: 00000001144de006 CR4: 0000000000770ef0 [ 123.450100] PKRU: 55555554 [ 123.450101] Call Trace: [ 123.450111] igc_ethtool_get_link_ksettings+0xd6/0x1b0 [igc] [ 123.450118] __ethtool_get_link_ksettings+0x71/0xb0 [ 123.450123] duplex_show+0x74/0xc0 [ 123.450129] dev_attr_show+0x1d/0x40 [ 123.450134] sysfs_kf_seq_show+0xa1/0x100 [ 123.450137] kernfs_seq_show+0x27/0x30 [ 123.450142] seq_read+0xb7/0x400 [ 123.450148] ? common_file_perm+0x72/0x170 [ 123.450151] kernfs_fop_read+0x35/0x1b0 [ 123.450155] vfs_read+0xb5/0x1b0 [ 123.450157] ksys_read+0x67/0xe0 [ 123.450160] __x64_sys_read+0x1a/0x20 [ 123.450164] do_syscall_64+0x38/0x90 [ 123.450168] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 123.450170] RIP: 0033:0x7f3b351fe142 [ 123.450173] Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 123.450174] RSP: 002b:00007fffef2ec138 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 123.450177] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b351fe142 [ 123.450179] RDX: 0000000000001001 RSI: 00005644c047f070 RDI: 0000000000000003 [ 123.450180] RBP: 00007fffef2ec340 R08: 00005644c047f070 R09: 00007f3b352d9320 [ 123.450182] R10: 00005644c047c010 R11: 0000000000000246 R12: 00005644c047cbf0 [ 123.450184] R13: 00005644c047e6d0 R14: 0000000000000003 R15: 00007fffef2ec140 [ 123.450189] Modules linked in: rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep toshiba_acpi industrialio toshiba_haps hp_accel lis3lv02d btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev input_leds nls_iso8859_1 snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_soc_hdac_hda snd_hda_codec_hdmi snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core ath10k_pci snd_hwdep intel_rapl_msr intel_rapl_common ath10k_core soundwire_bus snd_soc_core x86_pkg_temp_thermal ath intel_powerclamp snd_compress ac97_bus snd_pcm_dmaengine mac80211 snd_pcm coretemp snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_intel cfg80211 snd_seq snd_seq_device snd_timer mei_hdcp kvm libarc4 snd crct10dif_pclmul ghash_clmulni_intel aesni_intel mei_me dell_wmi [ 123.450266] dell_smbios soundcore sparse_keymap dcdbas crypto_simd cryptd mei dell_uart_backlight glue_helper ee1004 wmi_bmof intel_wmi_thunderbolt dell_wmi_descriptor mac_hid efi_pstore acpi_pad acpi_tad intel_cstate sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec crc32_pclmul rc_core drm intel_lpss_pci i2c_i801 ahci igc intel_lpss i2c_smbus idma64 xhci_pci libahci virt_dma xhci_pci_renesas wmi video pinctrl_tigerlake [ 123.450335] CR2: 0000000000000008 [ 123.450338] ---[ end trace 9f731e38b53c35cc ]--- The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks, and calls runtime resume and runtime suspend routine respectively. However, igc is like igb, runtime resume routine uses rtnl_lock() which upper ethtool layer also uses. So to prevent a deadlock on rtnl, take a different approach, use pm_runtime_suspended() to avoid reading register while device is runtime suspended. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-08-05 16:26:45 +0000