| Age | Commit message (Collapse) | Author |
|---|
|
Currently only PCI devices are supported in Ath12k driver. Refactor
Ath12k module_init and module_exit to include Ath12k AHB support.
Add Ath12k AHB support in Kconfig with dependency on Remoteproc
driver. Ath12k AHB support relies on remoteproc driver for firmware
download, power up/down etc.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1
Signed-off-by: Balamurugan S <quic_bselvara@quicinc.com>
Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250321-ath12k-ahb-v12-13-bb389ed76ae5@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
UserPD firmware image is loaded and booted by ath12k driver. Get the userPD
memory region from DTS and load the firmware for userPD from pre-defined
path into io-remapped address of this region. Authenticate this image
using pasid which is a peripheral ID. Set the spawn bit to instruct Q6
to spawn userPD thread. Wait for userPD to spawn which is indicated by
spawn interrupt. Ready interrupt is triggered once the userPD is powered
up completely.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250321-ath12k-ahb-v12-11-bb389ed76ae5@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Q6 and ath12k driver communicates using SMEM and IRQs. Spawn interrupt
is triggered once the userPD thread is spawned. Ready interrupts denotes
userPD is completely powered up and ready. Stop-ack is to acknowledge
the ath12k driver that userPD is stopped. Ath12k driver needs to set spawn
bit in SMEM to instruct Q6 to spawn a userPD. Similarly stop bit is
set when userPD needs to be stopped.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250321-ath12k-ahb-v12-10-bb389ed76ae5@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Q6 processor acts as rootPD, other hardware like IPQ5332 which are
attached to Q6 act as userPDs. WCSS driver handles loading and booting
of rootPD, while the ath12k driver boots the userPD.
Get the rproc handle from the DTS entry and boot the rootPD if it
is not already powered on. Register to the rproc notifier to monitor
the rproc state, this allows ath12k driver to know power up/down
sequence of the rootPD. Power up the rootPD and wait for a power-up
notification from the notifier callback before powering up the userPDs.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250321-ath12k-ahb-v12-9-bb389ed76ae5@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add Initial Ath12k AHB driver support for IPQ5332. IPQ5332 is AHB
based IEEE802.11be 2 GHz 2x2 WiFi device.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1
Signed-off-by: Balamurugan S <quic_bselvara@quicinc.com>
Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250321-ath12k-ahb-v12-8-bb389ed76ae5@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
