summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k/debugfs_htt_stats.c
AgeCommit message (Collapse)Author
2025-04-11wifi: ath12k: Fix buffer overflow in debugfsDan Carpenter
If the user tries to write more than 32 bytes then it results in memory corruption. Fortunately, this is debugfs so it's limited to root users. Fixes: 3f73c24f28b3 ("wifi: ath12k: Add support to enable debugfs_htt_stats") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/35daefbd-d493-41d9-b192-96177d521b40@stanley.mountain Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Received FSE StatsDinesh Karthikeyan
Add support to request received Finite State Entropy stats from firmware through HTT stats type 28. These stats give software and hardware FSE stats such as cache entry count, full cache count, current and peak occupancy count, pending search counts, etc. Sample output: ------------- echo 28 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_RX_FSE_STATS_TLV: === Software RX FSE STATS === Enable count = 0 Disable count = 0 Cache invalidate entry count = 0 Full cache invalidate count = 0 === Hardware RX FSE STATS === Cache hits count = 0 Cache no. of searches = 0 Cache occupancy peak count: [0] = 0 [1-16] = 0 [17-32] = 0 [33-48] = 0 [49-64] = 0 [65-80] = 0 [81-96] = 0 [97-112] = 0 [113-127] = 0 [128] = 0 Cache occupancy current count: [0] = 0 [1-16] = 0 [17-32] = 0 [33-48] = 0 [49-64] = 0 [65-80] = 0 [81-96] = 0 [97-112] = 0 [113-127] = 0 [128] = 0 Cache search square count: [0] = 0 [1-50] = 0 [51-100] = 0 [101-200] = 0 [201-255] = 0 [256] = 0 Cache search peak pending count: [0] = 0 [1-2] = 0 [3-4] = 0 [Greater/Equal to 5] = 0 Cache search tot pending count: [0] = 0 [1-2] = 0 [3-4] = 0 [Greater/Equal to 5] = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-6-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Uplink MUMIMO Trigger StatsRoopni Devanathan
Add support to request uplink MUMIMO trigger stats from firmware through HTT stats type 27. These stats give information about bandwidth, RSSI of signal received, dB mean of pilots received, etc., of all users. Note: MCC firmware version WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support tags HTT_STATS_RX_PDEV_UL_TRIG_STATS_TAG(94) and HTT_STATS_RX_PDEV_UL_OFDMA_USER_STATS_TAG(95), currently. Sample output: ------------- echo 27 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_RX_PDEV_UL_MUMIMO_TRIG_STATS_TLV: mac_id = 0 rx_11ax_ul_mumimo = 0 ul_mumimo_rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_mumimo_rx_gi_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_mumimo_rx_gi_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ..... ul_mumimo_rx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 half_ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 quarter_ul_mumimo_rx_bw = 0:0, 1:0, 2:0, 3:0 ul_mumimo_rx_stbc = 0 ul_mumimo_rx_ldpc = 0 rx_ul_mumimo_rssi_in_dbm: chain0 = 0:6, 1:0, 2:0, 3:0 rx_ul_mumimo_rssi_in_dbm: chain1 = 0:0, 1:0, 2:0, 3:0 ..... rx_ul_mumimo_target_rssi: user_0 = 0:-128, 1:-128, 2:-128, 3:-128 rx_ul_mumimo_target_rssi: user_1 = 0:-128, 1:-128, 2:-128, 3:-128 ..... rx_ul_mumimo_fd_rssi: user_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_mumimo_fd_rssi: user_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 ..... rx_ulmumimo_pilot_evm_db_mean: user_0 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulmumimo_pilot_evm_db_mean: user_1 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 ..... ul_mumimo_basic_trigger_rx_qos_null_only = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-5-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Uplink OFDMA Trigger StatsDinesh Karthikeyan
Add support to request uplink trigger stats from firmware through HTT stats type 26. These stats give information about uplink OFDMA bandwidth, received RSSI, power headroom, QoS, data size, PPDU info and pass/fail info for each user. Note: MCC firmware version WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support tags HTT_STATS_RX_PDEV_UL_TRIG_STATS_TAG(94) and HTT_STATS_RX_PDEV_UL_OFDMA_USER_STATS_TAG(95), currently. Sample output: ------------- echo 26 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_RX_PDEV_UL_TRIGGER_STATS_TLV: mac_id = 0 rx_11ax_ul_ofdma = 0 ul_ofdma_rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 half_ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 quarter_ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 ..... HTT_RX_PDEV_UL_OFDMA_USER_STAS_TLV: rx_ulofdma_non_data_ppdu_0 = 0 rx_ulofdma_data_ppdu_0 = 0 rx_ulofdma_mpdu_ok_0 = 0 rx_ulofdma_mpdu_fail_0 = 0 rx_ulofdma_non_data_nusers_0 = 0 rx_ulofdma_data_nusers_0 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-4-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Latency StatsDinesh Karthikeyan
Add support to request latency stats from firmware through HTT stats type 25. These stats give information about count of transmitted and received MAC Protocol Data Units(PDU) and Service Data Units(SDU) and other latency stats. Sample output: ------------- echo 25 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_LATENCY_CTX_TLV: duration = 0 tx_msdu_cnt = 0 tx_mpdu_cnt = 0 rx_msdu_cnt = 0 rx_mpdu_cnt = 0 HTT_STATS_LATENCY_PROF_TLV: Latency name = PROF_SCH_ENQ_TQM_CMDS count = 0 minimum = 4294967295 maximum = 0 ..... HTT_STATS_LATENCY_CNT_TLV: prof_enable_cnt = 39 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Support Sounding StatsDinesh Karthikeyan
Add support to request sounding stats from firmware through HTT stats type 22. These stats give sounding information of different Wi-Fi standards, channel vector upload status and correlation details. Sample output: ------------- echo 22 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_AC_SOUNDING_STATS_TLV: ac_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ac_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 ..... HTT_TX_AX_SOUNDING_STATS_TLV: ax_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ax_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0 ..... HTT_TX_BE_SOUNDING_STATS_TLV: be_cbf_20 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 be_cbf_40 = IBF: 0, SU_SIFS: 0, SU_RBO: 0, MU_SIFS: 0, MU_RBO: 0 ..... Sounding User_0 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0, 320MHz: 0 Sounding User_1 = 20MHz: 0, 40MHz: 0, 80MHz: 0, 160MHz: 0, 320MHz: 0 ..... CV UPLOAD HANDLER STATS: cv_nc_mismatch_err = 0 cv_fcs_err = 0 cv_frag_idx_mismatch = 0 cv_invalid_peer_id = 0 ..... CV QUERY STATS: cv_total_query = 0 cv_total_pattern_query = 0 cv_total_bw_query = 0 cv_invalid_bw_coding = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250204064417.3671928-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Dump additional PDEV receive rate HTT statsLingbo Kong
Support to dump additional PDEV receive rate stats through HTT debugfs stats type 30. Sample output: ------------------ echo 30 > /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats HTT_RX_PDEV_RATE_EXT_STATS_TLV: rssi_mgmt_in_dbm = -48 rx_stbc_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_ofdma_rx_mcs_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 rx_11ax_su_txbf_mcs_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:9, 6:72, 7:41, 8:1, 9:0, 10:0, 11:0, 12:0, 13:0 rx_11ax_mu_txbf_mcs_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 rx_11ax_dl_ofdma_mcs_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 rx_bw_ext = 0:1395, 1:0, 2:0, 3:0, 4:0 rx_su_punctured_mode = 0:0, 1:0, 2:0, 3:0, 4:0 rx_mcs_ext = 0:0, 1:0, 2:0, 3:0, 4:0, 5:14, 6:149, 7:44, 8:1, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 rx_gi_ext[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:14, 6:149, 7:44, 8:1, 9:0, 10:0, 11:0, 12:0, 13:0 rx_gi_ext[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 rx_gi_ext[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 rx_gi_ext[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_ofdma_rx_gi_ext[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_ofdma_rx_gi_ext[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_ofdma_rx_gi_ext[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ul_ofdma_rx_gi_ext[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250113071758.19589-4-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Dump PDEV receive rate HTT statsLingbo Kong
Support to dump PDEV receive rate stats through HTT debugfs stats type 10. Sample output: ----------------- echo 10 > /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats HTT_RX_PDEV_RATE_STATS_TLV: mac_id = 0 nsts = 0 rx_ldpc = 96 rts_cnt = 0 rssi_mgmt = 4294967240 rssi_data = 4294967250 rssi_comb = 4294967239 rssi_in_dbm = -46 rx_evm_nss_count = 0 rx_evm_pilot_count = 0 rx_11ax_su_ext = 0 rx_11ac_mumimo = 0 rx_11ax_mumimo = 0 rx_11ax_ofdma = 0 txbf = 0 rx_su_ndpa = 0 rx_mu_ndpa = 0 rx_br_poll = 0 rx_active_dur_us_low = 1000106 rx_active_dur_us_high = 0 rx_11ax_ul_ofdma = 0 ul_ofdma_rx_stbc = 0 ul_ofdma_rx_ldpc = 0 per_chain_rssi_pkt_type = 0x88 rx_nss = 0:40, 1:56, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_dcm = 0:0, 1:0, 2:0, 3:0, 4:0 rx_stbc = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_bw = 0:1175, 1:0, 2:0, 3:0 rx_pream = 0:435, 1:644, 2:0, 3:0, 4:96, 5:0, 6:0 rx_11ax_su_txbf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_11ax_mu_txbf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_legacy_cck_rate = 0:641, 1:0, 2:3, 3:0 rx_legacy_ofdm_rate = 0:267, 1:0, 2:72, 3:0, 4:96, 5:0, 6:0, 7:0 ul_ofdma_rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 ul_ofdma_rx_bw = 0:0, 1:0, 2:0, 3:0 rx_ulofdma_non_data_ppdu = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulofdma_data_ppdu = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulofdma_mpdu_ok = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulofdma_mpdu_fail = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulofdma_non_data_nusers = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulofdma_data_nusers = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_11ax_dl_ofdma_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_11ax_dl_ofdma_ru = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0 rx_ulmumimo_non_data_ppdu = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulmumimo_data_ppdu = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulmumimo_mpdu_ok = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ulmumimo_mpdu_fail = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_mcs = 0:0, 1:0, 2:0, 3:0, 4:28, 5:8, 6:37, 7:21, 8:2, 9:0, 10:0, 11:0, 12:0, 13:0 pilot_evm_db[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[4] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[5] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[6] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db[7] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 pilot_evm_db_mean = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rssi_chain_in_db[0] = 0: 196, 1: 29, 2: 29, 3: 29 rssi_chain_in_db[1] = 0: 196, 1: 29, 2: 29, 3: 29 rssi_chain_in_db[2] = 0: 128, 1: 128, 2: 128, 3: 128 rssi_chain_in_db[3] = 0: 128, 1: 128, 2: 128, 3: 128 rssi_chain_in_db[4] = 0: 128, 1: 128, 2: 128, 3: 128 rssi_chain_in_db[5] = 0: 128, 1: 128, 2: 128, 3: 128 rssi_chain_in_db[6] = 0: 128, 1: 128, 2: 128, 3: 128 rssi_chain_in_db[7] = 0: 128, 1: 128, 2: 128, 3: 128 rx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:28, 5:8, 6:37, 7:21, 8:2, 9:0, 10:0, 11:0 rx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ul_ofdma_rx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 rx_ul_fd_rssi: nss[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[4] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[5] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[6] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_ul_fd_rssi: nss[7] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 rx_per_chain_rssi_in_dbm[0] = 0:-60, 1:29, 2:29, 3:29 rx_per_chain_rssi_in_dbm[1] = 0:-60, 1:29, 2:29, 3:29 rx_per_chain_rssi_in_dbm[2] = 0:-128, 1:-128, 2:-128, 3:-128 rx_per_chain_rssi_in_dbm[3] = 0:-128, 1:-128, 2:-128, 3:-128 rx_per_chain_rssi_in_dbm[4] = 0:-128, 1:-128, 2:-128, 3:-128 rx_per_chain_rssi_in_dbm[5] = 0:-128, 1:-128, 2:-128, 3:-128 rx_per_chain_rssi_in_dbm[6] = 0:-128, 1:-128, 2:-128, 3:-128 rx_per_chain_rssi_in_dbm[7] = 0:-128, 1:-128, 2:-128, 3:-128 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250113071758.19589-3-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Dump PDEV transmit rate HTT statsLingbo Kong
Support to dump PDEV transmit rate stats through HTT debugfs stats type 9. Sample output: ------------------------- echo 9 > /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:03\:00.0/mac0/htt_stats HTT_TX_PDEV_RATE_STATS_TLV: mac_id = 0 tx_ldpc = 1088 ac_mu_mimo_tx_ldpc = 0 ax_mu_mimo_tx_ldpc = 0 ofdma_tx_ldpc = 0 rts_cnt = 941 rts_success = 180 ack_rssi = 4294967168 Legacy CCK Rates: 1 Mbps: 830, 2 Mbps: 0, 5.5 Mbps: 0, 12 Mbps: 0 Legacy OFDM Rates: 6 Mbps: 942, 9 Mbps: 0, 12 Mbps: 0, 18 Mbps: 0 24 Mbps: 0, 36 Mbps: 0, 48 Mbps: 0, 54 Mbps: 0 HE LTF: 1x: 0, 2x: 957, 4x: 132 tx_mcs = 0:342, 1:260, 2:171, 3:148, 4:31, 5:34, 6:93, 7:10, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 ax_mu_mimo_tx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ofdma_tx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_nss = 1:754, 2:335, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ac_mu_mimo_tx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ax_mu_mimo_tx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ofdma_tx_nss = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 tx_bw = 0:1089, 1:0, 2:0, 3:0, 4:0 tx_stbc = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_gi[0] = 0:210, 1:260, 2:171, 3:148, 4:31, 5:34, 6:93, 7:10, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_gi[3] = 0:132, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ac_mu_mimo_tx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ac_mu_mimo_tx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ac_mu_mimo_tx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ac_mu_mimo_tx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ax_mu_mimo_tx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ax_mu_mimo_tx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ax_mu_mimo_tx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ax_mu_mimo_tx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ofdma_tx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ofdma_tx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ofdma_tx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 ofdma_tx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_su_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 tx_mu_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ac_mu_mimo_tx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0 ac_mu_mimo_tx_bw = 0:0, 1:0, 2:0, 3:0 ax_mu_mimo_tx_bw = 0:0, 1:0, 2:0, 3:0 ofdma_tx_bw = 0:0, 1:0, 2:0, 3:0 tx_pream = 0:942, 1:830, 2:0, 3:0, 4:1850, 5:0, 6:0 tx_dcm = 0:131, 1:0, 2:0, 3:0, 4:0 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250113071758.19589-2-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support pdev Puncture StatsRajat Soni
Add support to request pdev puncture stats from firmware through HTT stats type 46. These stats give the count of number of subbands used in different wifi standards. Sample output: ------------- echo 46 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_ofdm_su_last_used_pattern_mask = 0x00000001 tx_ofdm_su_num_subbands_used_cnt_01 = 217 tx_ofdm_su_num_subbands_used_cnt_02 = 0 tx_ofdm_su_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_ax_dl_mu_ofdma_last_used_pattern_mask = 0x00000000 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_01 = 0 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_02 = 0 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_be_dl_mu_ofdma_last_used_pattern_mask = 0x00000000 tx_be_dl_mu_ofdma_num_subbands_used_cnt_01 = 0 tx_be_dl_mu_ofdma_num_subbands_used_cnt_02 = 0 tx_be_dl_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 rx_ax_ul_mu_ofdma_last_used_pattern_mask = 0x00000000 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_01 = 0 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_02 = 0 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 rx_be_ul_mu_ofdma_last_used_pattern_mask = 0x00000000 rx_be_ul_mu_ofdma_num_subbands_used_cnt_01 = 0 rx_be_ul_mu_ofdma_num_subbands_used_cnt_02 = 0 rx_be_ul_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218035711.2573584-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support AST Entry StatsRoopni Devanathan
Add support to request Address Search Table(AST) entries stats from firmware through HTT stats type 41. These stats give AST entries related information such as software peer id, MAC address, pdev id, vdev, id, next hop, etc. Sample output: ------------- echo 41 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_AST_ENTRY_TLV: ast_index = 10 mac_addr = 00:00:00:01:00:00 sw_peer_id = 0 pdev_id = 3 vdev_id = 255 next_hop = 0 mcast = 0 monitor_direct = 0 mesh_sta = 0 mec = 0 intra_bss = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218035711.2573584-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support Transmit Buffer OFDMA StatsPradeep Kumar Chitrapu
Add support to request OFDMA stats of transmit buffers from firmware through HTT stats type 32. These stats give information about NDPA, NDP, BRP and steering mechanisms. Note: WCN7850 firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 32. Sample output: ------------- echo 32 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TXBF_OFDMA_AX_NDPA_STATS_TLV: ax_ofdma_ndpa_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_ndpa_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_NDP_STATS_TLV: ax_ofdma_ndp_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_ndp_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_BRP_STATS_TLV: ax_ofdma_brpoll_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_brpoll_tied = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_STEER_STATS_TLV: ax_ofdma_num_ppdu_steer = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_num_usrs_prefetch = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_STEER_MPDU_STATS_TLV: rbo_steer_mpdus_tried = 0 rbo_steer_mpdus_failed = 0 sifs_steer_mpdus_tried = 0 sifs_steer_mpdus_failed = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <jjohnson@kernel.org> Link: https://patch.msgid.link/20241128110949.3672364-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support Transmit Rate Buffer StatsPradeep Kumar Chitrapu
Add support to request transmit rate buffer stats from firmware through HTT stats type 31. These stats give information such as MCS, NSS and bandwidth of transmit and input buffer. Sample output: ------------- echo 31 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_PDEV_TX_RATE_TXBF_STATS: Legacy OFDM Rates: 6 Mbps: 0, 9 Mbps: 0, 12 Mbps: 0, 18 Mbps: 0 24 Mbps: 0, 36 Mbps: 0, 48 Mbps: 0, 54 Mbps: 0 tx_ol_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_ibf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_txbf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0 tx_ol_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_ibf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_txbf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0 tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 half_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 quarter_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0 HTT_STATS_PDEV_TXBF_FLAG_RETURN_STATS: TXBF_reason_code_stats: 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Jeff Johnson <jjohnson@kernel.org> Link: https://patch.msgid.link/20241128110949.3672364-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-11-21wifi: ath12k: Fix inappropriate use of print_array_to_buf_index()Roopni Devanathan
Currently in ath12k_htt_print_tx_pdev_mumimo_grp_stats_tlv() the htt_stats_buf->ul_mumimo_grp_best_usrs array is printed using print_array_to_buf_index() with a stats_index of 1. This is meant to convey the semantic that first entry in ul_mumimo_grp_best_usrs is associated with user 1. However, unlike some of the other "usr" arrays which have that semantic, ul_mumimo_grp_best_usrs does not have that semantic. Instead the first entry corresponds to user 0. Fix the issue by calling the API - print_array_to_buf(), instead of print_array_to_buf_index(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241118035722.1755373-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-20wifi: ath12k: Support MBSSID Control Frame StatsSidhanta Sahu
Add support to request MBSSID control frame stats from firmware through HTT stats type 54. These stats give information such as basic trigger, BSR trigger, multi-user RTS and uplink MUMIMO trigger within and across various BSS. Note: WCN7850 firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 54. Sample output: ------------- echo 54 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_MBSSID_CTRL_FRAME_STATS_TLV: mac_id = 0 basic_trigger_across_bss = 0 basic_trigger_within_bss = 0 bsr_trigger_across_bss = 0 bsr_trigger_within_bss = 0 mu_rts_across_bss = 0 mu_rts_within_bss = 0 ul_mumimo_trigger_across_bss = 0 ul_mumimo_trigger_within_bss = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sidhanta Sahu <quic_sidhanta@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241105052854.2118987-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-20wifi: ath12k: Support Transmit PER Rate StatsDinesh Karthikeyan
Add support to request per rate stats through HTT stats type 40. These stats give information about rates of PPDUs and MPDUs for single user and for OFDMA and MUMIMO technologies corresponding to multiple users. Sample output: ------------- echo 40 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_PER_STATS: PER_STATS_SU: PER per BW: ppdus_tried_su = 0:0 1:0 2:0 3:0 4:0 ppdus_ack_failed_su = 0:0 1:0 2:0 3:0 4:0 mpdus_tried_su = 0:0 1:0 2:0 3:0 4:0 mpdus_failed_su = 0:0 1:0 2:0 3:0 4:0 PER per NSS: ppdus_tried_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 ppdus_ack_failed_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 mpdus_tried_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 mpdus_failed_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 PER per MCS: ppdus_tried_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 ppdus_ack_failed_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 mpdus_tried_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 mpdus_failed_su = 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241115062854.1919672-5-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-20wifi: ath12k: Support SoC Common StatsDinesh Karthikeyan
Add support to request SoC stat from firmware through HTT stat type 38. This stat gives drop count of SoC. Note: MCC firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support tag HTT_STATS_SOC_TXRX_STATS_COMMON_TAG(125). Sample output: ------------- echo 38 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_SOC_COMMON_STATS_TLV: soc_drop_count = 0x0000000000000000 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241115062854.1919672-4-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-20wifi: ath12k: Support phy counter and TPC statsDinesh Karthikeyan
Add support to request counters and Transmission Power Control (TPC) stats through HTT stats type 37. These stats give information about counters like received packet count, CRC pass count, error count, transmit abort count, etc., about counter reset like reset cause, channel frequency, number and mode, channel flags, etc., about TPC like transmit power scale, maximum transmit power, gain cap, EIRP, etc. Note: MCC firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 37, i.e., the firmware does not respond to the command requesting stats. Sample output: ------------- echo 37 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_PHY_STATS_TLV: bdf_nf_chain[0] = -92 bdf_nf_chain[1] = -94 bdf_nf_chain[2] = -94 bdf_nf_chain[3] = -93 ..... HTT_PHY_COUNTERS_TLV: rx_ofdma_timing_err_cnt = 18068 rx_cck_fail_cnt = 0 mactx_abort_cnt = 2612 macrx_abort_cnt = 0 ..... HTT_PHY_RESET_STATS_TLV: pdev_id = 0 chan_mhz = 0 chan_band_center_freq1 = 0 chan_band_center_freq2 = 0 ..... HTT_PHY_RESET_COUNTERS_TLV: pdev_id = 0 cf_active_low_fail_cnt = 0 cf_active_low_pass_cnt = 0 phy_off_through_vreg_cnt = 0 ..... HTT_PHY_TPC_STATS_TLV: pdev_id = 0 tx_power_scale = 0 tx_power_scale_db = 0 min_negative_tx_power = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241115062854.1919672-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-20wifi: ath12k: Support Downlink Pager StatsDinesh Karthikeyan
Add support to request downlink pager stats from firmware through HTT stats type 36. These stats give paging information like number of pages, their timestamp, number of locked and free pages, synchronous and asynchronous locked pages. Note: MCC firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 responds to the event requesting stats, but it does not give any data. Sample output: ------------- echo 36 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_DLPAGER_STATS_TLV: ASYNC locked pages = 2 SYNC locked pages = 0 Total locked pages = 2 Total free pages = 127 LOCKED PAGES HISTORY last_locked_page_idx = 0 Index - 0 ; Page Number - 8495 ; Num of pages - 1 ; Timestamp - 4031009360us Index - 1 ; Page Number - 7219 ; Num of pages - 2 ; Timestamp - 885379515us Index - 2 ; Page Number - 0 ; Num of pages - 0 ; Timestamp - 0us Index - 3 ; Page Number - 0 ; Num of pages - 0 ; Timestamp - 0us ..... UNLOCKED PAGES HISTORY last_unlocked_page_idx = 0 Index - 0 ; Page Number - 7144 ; Num of pages - 2 ; Timestamp - 4032070008us Index - 1 ; Page Number - 7214 ; Num of pages - 2 ; Timestamp - 885379512us Index - 2 ; Page Number - 0 ; Num of pages - 0 ; Timestamp - 0us Index - 3 ; Page Number - 0 ; Num of pages - 0 ; Timestamp - 0us ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241115062854.1919672-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-12wifi: ath12k: Fix for out-of bound access errorKarol Przybylski
Selfgen stats are placed in a buffer using print_array_to_buf_index() function. Array length parameter passed to the function is too big, resulting in possible out-of bound memory error. Decreasing buffer size by one fixes faulty upper bound of passed array. Discovered in coverity scan, CID 1600742 and CID 1600758 Signed-off-by: Karol Przybylski <karprzy7@gmail.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241105101132.374372-1-karprzy7@gmail.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-23wifi: ath12k: fix struct hal_rx_ppdu_startKang Yang
Current struct hal_rx_ppdu_start in hal_rx.h is not matched with hardware descriptor definition. This hardware descriptor definition is determined by hardware. Host shall follow it. So update struct hal_rx_ppdu_start and related code. Both QCN9274 and WCN7850 need this modification. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Link: https://patch.msgid.link/20241022110831.974-4-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-16wifi: ath12k: Support BE OFDMA Pdev Rate StatsPradeep Kumar Chitrapu
Add support to request BE OFDMA pdev rate stats from firmware through HTT stats type 51. These stats give information such as number of spatial streams, bandwidth, MCS, etc. Note: WCN7850 firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 51. Sample output: ------------- echo 51 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_PDEV_RATE_STATS_BE_OFDMA_TLV: mac_id = 0 be_ofdma_tx_ldpc = 0 be_ofdma_tx_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 be_ofdma_eht_sig_mcs = 0:0, 1:0, 2:0, 3:0 be_ofdma_tx_ru_size = 26:0 52:0 52+26:0 106:0 106+26:0 242:0 484:0 484+242:0 996:0 996+484:0 996+484+242:0 996x2:0 996x2+484:0 996x3:0 996x3+484:0 996x4:0 be_ofdma_tx_nss = = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 be_ofdma_tx_bw = 0:0, 1:0, 2:0, 3:0, 4:0 be_ofdma_tx_gi[0] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 be_ofdma_tx_gi[1] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 be_ofdma_tx_gi[2] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 be_ofdma_tx_gi[3] = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20241014070610.3982173-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-16wifi: ath12k: Support Pdev Scheduled Algorithm StatsSidhanta Sahu
Add support to request scheduled algorithm stats from firmware through HTT stats type 49. These stats give information such as count of DLOFDMA enabled, disabled, probed and monitored based on rate and latency, consecutive number of MPDUs tried and succeeded, etc. Note: WCN7850 firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 49. Sample output: ------------- echo 49 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_PDEV_SCHED_ALGO_TLV: mac_id = 0 rate_based_dlofdma_enabled_count = 0:0, 1:0, 2:0, 3:0 rate_based_dlofdma_disabled_count = 0:0, 1:0, 2:0, 3:0 rate_based_dlofdma_probing_count = 0:0, 1:0, 2:0, 3:0 rate_based_dlofdma_monitoring_count = 0:0, 1:0, 2:0, 3:0 chan_acc_lat_based_dlofdma_enabled_count = 0:0, 1:0, 2:0, 3:0 chan_acc_lat_based_dlofdma_disabled_count = 0:0, 1:0, 2:0, 3:0 chan_acc_lat_based_dlofdma_monitoring_count = 0:0, 1:0, 2:0, 3:0 downgrade_to_dl_su_ru_alloc_fail = 0:0, 1:0, 2:0, 3:0 candidate_list_single_user_disable_ofdma = 0:0, 1:0, 2:0, 3:0 dl_cand_list_dropped_high_ul_qos_weight = 0:0, 1:0, 2:0, 3:0 ax_dlofdma_disabled_due_to_pipelining = 0:0, 1:0, 2:0, 3:0 dlofdma_disabled_su_only_eligible = 0:0, 1:0, 2:0, 3:0 dlofdma_disabled_consec_no_mpdus_tried = 0:0, 1:0, 2:0, 3:0 dlofdma_disabled_consec_no_mpdus_success = 0:0, 1:0, 2:0, 3:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sidhanta Sahu <quic_sidhanta@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241014070610.3982173-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-16wifi: ath12k: Support DMAC Reset StatsRajat Soni
Add support to request DMAC reset stats from firmware through HTT stats type 45. These stats give debug SoC error stats such as reset count, reset time, engage time and count, disengage time and count and destination ring mask. Sample output: ------------- echo 45 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_DMAC_RESET_STATS_TLV: reset_count = 1 reset_time_ms = 3013430342 disengage_time_ms = 3013430342 engage_time_ms = 3013430342 disengage_count = 1 engage_count = 1 drain_dest_ring_mask = 0x0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20241014065259.3968727-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-11wifi: ath12k: switch to using wiphy_lock() and remove ar->conf_mutexKalle Valo
Switch from using driver specific ar->conf_mutex to wiphy->mtx. The benefits are: * one lock less and simplified locking * possibility to use wiphy_work_queue() without other locks Most of the mac80211 ops are called within wiphy_lock(), most notable exception being tx op. This can be checked with lockdep_assert_wiphy() from net/mac80211/driver-ops.[ch] and I veried that by manually going through all the ops in ath12k_ops which had lockdep_assert_wiphy(). The conversion was simple: * All conf_mutex lock() and unlock() calls which already were called under wiphy_lock() I replaced with lockdep_assert_wiphy(). * The rest of conf_mutex calls I replaced with wiphy_lock() and wiphy_unlock(). * All lockdep_asset_held(conf_mutex) calls I replaced with lockdep_assert_wiphy(). One exception was in ath12k_core_post_reconfigure_recovery() where the wiphy lock needs to be taken before hw_mutex to avoid a lockdep warning. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241007165932.78081-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-11wifi: ath12k: Support Pdev OBSS StatsDinesh Karthikeyan
Add support to request pdev OBSS stats from firmware through stats type 23. These stats give information about PPDUs transmitted or tried to be transmitted in Spatial Reuse Groups(SRG), Parameterized Spatial Reuse(PSR) and non-PSR groups. Sample output: ------------- echo 23 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_PDEV_OBSS_PD_STATS_TLV: num_spatial_reuse_tx = 0 num_spatial_reuse_opportunities = 0 num_non_srg_opportunities = 0 num_non_srg_ppdu_tried = 0 ..... HTT_PDEV_OBSS_PD_PER_AC_STATS: Access Category 0 (best effort) num_non_srg_ppdu_tried = 0 num_non_srg_ppdu_success = 0 num_srg_ppdu_tried = 0 num_srg_ppdu_success = 0 Access Category 1 (background) num_non_srg_ppdu_tried = 0 num_non_srg_ppdu_success = 0 num_srg_ppdu_tried = 0 num_srg_ppdu_success = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241005104206.3327143-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-11wifi: ath12k: Support pdev CCA StatsDinesh Karthikeyan
Add support to request CCA stats for physical devices from firmware through HTT stats type 19. These stats give information about channel number, number of records, counters' bitmap, collection interval and different CCA counters. Sample output: ------------- echo 19 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_PDEV_CCA_STATS_HIST_TLV (1s): chan_num = 5955 num_records = 10 valid_cca_counters_bitmap = 0xff collection_interval = 1000 HTT_PDEV_STATS_CCA_COUNTERS_TLV:(in usec) tx_frame_usec = 0 rx_frame_usec = 0 rx_clear_usec = 999955 my_rx_frame_usec = 0 usec_cnt = 999955 med_rx_idle_usec = 0 med_tx_idle_global_usec = 0 cca_obss_usec = 999955 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241005101816.3314728-5-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-11wifi: ath12k: Support pdev Transmit Multi-user statsDinesh Karthikeyan
Add support to request multi-user stats from firmware for transmitter through HTT stats type 17. These stats give information about multi- user MIMO, OFDMA and MPDU for different Wi-Fi standards. Sample output: ------------- echo 17 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_PDEV_MU_MIMO_SCH_STATS_TLV: mu_mimo_sch_posted = 0 mu_mimo_sch_failed = 0 mu_mimo_ppdu_posted = 0 ac_mu_mimo_sch_posted_per_group_index 0 (SU) = 0 ac_mu_mimo_sch_posted_per_group_index 1 (TOTAL STREAMS = 2) = 0 ..... ax_mu_mimo_sch_posted_per_group_index 0 (SU) = 0 ax_mu_mimo_sch_posted_per_group_index 1 (TOTAL STREAMS = 2) = 0 ..... be_mu_mimo_sch_posted_per_group_index 0 (SU) = 0 be_mu_mimo_sch_posted_per_group_index 1 (TOTAL STREAMS = 2) = 0 ..... 11ac MU_MIMO SCH STATS: ac_mu_mimo_sch_nusers_0 = 0 ac_mu_mimo_sch_nusers_1 = 0 ac_mu_mimo_sch_nusers_2 = 0 ac_mu_mimo_sch_nusers_3 = 0 11ax MU_MIMO SCH STATS: ax_mu_mimo_sch_nusers_0 = 0 ax_mu_mimo_sch_nusers_1 = 0 ax_mu_mimo_sch_nusers_2 = 0 ..... 11be MU_MIMO SCH STATS: be_mu_mimo_sch_nusers_0 = 0 be_mu_mimo_sch_nusers_1 = 0 be_mu_mimo_sch_nusers_2 = 0 ..... 11ax OFDMA SCH STATS: ax_ofdma_sch_nusers_0 = 0 ax_ul_ofdma_basic_sch_nusers_0 = 0 ax_ul_ofdma_bsr_sch_nusers_0 = 0 ax_ul_ofdma_bar_sch_nusers_0 = 0 ax_ul_ofdma_brp_sch_nusers_0 = 0 ..... 11ax UL MUMIMO SCH STATS: ax_ul_mumimo_basic_sch_nusers_0 = 0 ax_ul_mumimo_brp_sch_nusers_0 = 0 ax_ul_mumimo_basic_sch_nusers_1 = 0 ax_ul_mumimo_brp_sch_nusers_1 = 0 ..... HTT_TX_PDEV_MUMIMO_GRP_STATS: dl_mumimo_grp_tputs_observed (per bin = 300 mbps) = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 dl_mumimo_grp eligible = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 dl_mumimo_grp_ineligible = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0 ..... HTT_TX_PDEV_MU_MIMO_AC_MPDU_STATS: ac_mu_mimo_mpdus_queued_usr_0 = 0 ac_mu_mimo_mpdus_tried_usr_0 = 0 ac_mu_mimo_mpdus_failed_usr_0 = 0 ..... HTT_TX_PDEV_MU_MIMO_AX_MPDU_STATS: ax_mu_mimo_mpdus_queued_usr_0 = 0 ax_mu_mimo_mpdus_tried_usr_0 = 0 ax_mu_mimo_mpdus_failed_usr_0 = 0 ..... HTT_TX_PDEV_AX_MU_OFDMA_MPDU_STATS: ax_mu_ofdma_mpdus_queued_usr_0 = 0 ax_mu_ofdma_mpdus_tried_usr_0 = 0 ax_mu_ofdma_mpdus_failed_usr_0 = 0 ..... 11ac MU_MIMO SCH STATS: ac_mu_mimo_sch_nusers_0 = 0 ac_mu_mimo_sch_nusers_1 = 0 ac_mu_mimo_sch_nusers_2 = 0 ac_mu_mimo_sch_nusers_3 = 0 ..... Note: MCC firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not print stats because MCC firmware reports an event, but there are no tags or data. The length of the received TLV is 0. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20241005101816.3314728-4-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-11wifi: ath12k: Support Ring and SFM statsDinesh Karthikeyan
Add support to request ring and SFM stats from firmware through HTT stats type 15 and 16 respectively. These stats give information such as ring size, ring address, valid number of words in ring, etc., for stats type 15 and SFM buffer information, number of users, words used by users, etc., for stat type 16. Sample output: ------------- echo 15 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_STRING_TLV: data = TCL_GSE_CMD_RING HTT_SRING_STATS_TLV: mac_id = 0 ring_id = 0 arena = 8 ..... echo 16 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_SFM_CMN_TLV: mac_id = 0 buf_total = 1760 mem_empty = 32895 ..... HTT_STATS_STRING_TLV: data = PMAC_SFM_CLIENT0_RXPCU0 HTT_SFM_CLIENT_TLV: client_id = 0 buf_min = 148 buf_max = 445 ..... HTT_SFM_CLIENT_USER_TLV: dwords_used_by_user_n = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0, 38:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241005101816.3314728-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-11wifi: ath12k: Support Self-Generated Transmit statsDinesh Karthikeyan
Add support to request transmit selfgen stats from firmware through HTT stats type 12. These stats give information about single user NDP packets, multi- user MIMO NDP packets, OFDMA triggers, etc. Sample output: ------------- echo 12 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_SELFGEN_CMN_STATS_TLV: mac_id = 0 su_bar = 0 rts = 0 ..... HTT_TX_SELFGEN_AC_STATS_TLV: ac_su_ndpa_tried = 0 ac_su_ndp_tried = 0 ac_mu_mimo_ndpa_tried = 0 ..... HTT_TX_SELFGEN_AX_STATS_TLV: ax_su_ndpa_tried = 0 ax_su_ndp_tried = 0 ax_mu_mimo_ndpa_tried = 0 ..... HTT_TX_SELFGEN_BE_STATS_TLV: be_su_ndpa_queued = 0 be_su_ndpa_tried = 0 be_su_ndp_queued = 0 ..... HTT_TX_SELFGEN_AC_ERR_STATS_TLV: ac_su_ndp_err = 0 ac_su_ndpa_err = 0 ac_mu_mimo_ndpa_err = 0 ..... HTT_TX_SELFGEN_AX_ERR_STATS_TLV: ax_su_ndp_err = 0 ax_su_ndpa_err = 0 ax_mu_mimo_ndpa_err = 0 ..... HTT_TX_SELFGEN_BE_ERR_STATS_TLV: be_su_ndp_err = 0 be_su_ndp_flushed = 0 be_su_ndpa_err = 0 ..... HTT_TX_SELFGEN_AC_SCHED_STATUS_STATS_TLV: ac_su_ndpa_sch_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 ac_su_ndp_sch_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 ac_mu_mimo_ndpa_sch_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 ..... HTT_TX_SELFGEN_AX_SCHED_STATUS_STATS_TLV: ax_su_ndpa_sch_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 ax_su_ndp_sch_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 ax_mu_mimo_ndpa_sch_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 ..... HTT_TX_SELFGEN_BE_SCHED_STATUS_STATS_TLV: be_su_ndpa_sch_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 be_su_ndp_sch_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 be_mu_mimo_ndpa_sch_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20241005101816.3314728-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-07wifi: ath12k: Modify print_array_to_buf() to support arrays with 1-based ↵Roopni Devanathan
semantics The API print_array_to_buf() currently supports printing arrays with 0 indexing. In some cases, a few arrays need to be printed with 1-based indexing, i.e., array should be printed, starting with 1. Add a new version of print_array_to_buf(), named print_array_to_buf_index(), which implements the functionality of print_array_to_index(), but with an extra variable, pointing to the index starting with which the array should be printed. Modify print_array_to_buf() to call print_array_to_buf_index() with 0 as the starting index. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20241004085915.1788951-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-07-10wifi: ath12k: Support Transmit DE statsDinesh Karthikeyan
Add support to request transmit DE stats from firmware through HTT stats type 8. These stats give information about enqueued packets, discarded packets, failed packets and other information such as power, bandwidth information, number of retries, etc. Sample output: ------------- echo 8 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_DE_CMN_STATS_TLV: mac_id = 0 tcl2fw_entry_count = 0 not_to_fw = 0 ..... HTT_TX_DE_EAPOL_PACKETS_STATS_TLV: m1_packets = 0 m2_packets = 0 m3_packets = 0 ..... HTT_TX_DE_CLASSIFY_STATS_TLV: arp_packets = 0 igmp_packets = 0 dhcp_packets = 0 ..... HTT_TX_DE_CLASSIFY_FAILED_STATS_TLV: ap_bss_peer_not_found = 0 ap_bcast_mcast_no_peer = 0 sta_delete_in_progress = 0 ..... HTT_TX_DE_CLASSIFY_STATUS_STATS_TLV: eok = 0 classify_done = 0 lookup_failed = 0 ..... HTT_TX_DE_ENQUEUE_PACKETS_STATS_TLV: enqueued_pkts = 0 to_tqm = 0 to_tqm_bypass = 0 HTT_TX_DE_ENQUEUE_DISCARD_STATS_TLV: discarded_pkts = 0 local_frames = 0 is_ext_msdu = 0 HTT_TX_DE_COMPL_STATS_TLV: tcl_dummy_frame = 0 tqm_dummy_frame = 0 tqm_notify_frame = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240704090535.827680-1-quic_rdevanat@quicinc.com
2024-07-01wifi: ath12k: Support TQM statsDinesh Karthikeyan
Add support to request pdev TQM stats from firmware through HTT stats type 6. This stat type gives information such as TQM error, MPDU related information and TQM pdev stats. Sample output: ------------- echo 6 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_TQM_ERROR_STATS_TLV: q_empty_failure = 0 q_not_empty_failure = 0 add_msdu_failure = 0 TQM_ERROR_RESET_STATS: tqm_cache_ctl_err = 0 tqm_soft_reset = 0 tqm_reset_total_num_in_use_link_descs = 0 ..... HTT_TX_TQM_GEN_MPDU_STATS_TLV: gen_mpdu_end_reason = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0 HTT_TX_TQM_LIST_MPDU_STATS_TLV: list_mpdu_end_reason = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0 HTT_TX_TQM_LIST_MPDU_CNT_TLV_V: list_mpdu_cnt_hist = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 HTT_TX_TQM_PDEV_STATS_TLV_V: msdu_count = 0 mpdu_count = 0 remove_msdu = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240625042217.1303332-4-quic_rdevanat@quicinc.com
2024-07-01wifi: ath12k: Support pdev error statsDinesh Karthikeyan
Add support to request pdev error stats from firmware through HTT stats type 5. This stats type gives information such as list of pdev errors, reasons for reset, logging information about recovery, drain and war stats. etc. Sample output: ------------- echo 5 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_HW_STATS_PDEV_ERRS_TLV: mac_id = 0 tx_abort = 0 tx_abort_fail_count = 0 rx_abort = 53 ..... PDEV_PHY_WARM_RESET_REASONS: phy_warm_reset_reason_phy_m3 = 0 phy_warm_reset_reason_tx_hw_stuck = 0 phy_warm_reset_reason_num_cca_rx_frame_stuck = 0 ..... WAL_RX_RECOVERY_STATS: wal_rx_recovery_rst_mac_hang_count = 0 wal_rx_recovery_rst_known_sig_count = 0 wal_rx_recovery_rst_no_rx_count = 0 ..... HTT_RX_DEST_DRAIN_STATS: rx_dest_drain_rx_descs_leak_prevention_done = 0 rx_dest_drain_rx_descs_saved_cnt = 0 rx_dest_drain_rxdma2reo_leak_detected = 0 ..... HTT_HW_STATS_INTR_MISC_TLV: hw_intr_name = AMPI mask = 0 count = 2 HTT_HW_STATS_WHAL_TX_TLV: mac_id = 0 last_unpause_ppdu_id = 0 hwsch_unpause_wait_tqm_write = 0 ..... HTT_HW_WAR_STATS_TLV: mac_id = 0 hw_war 0 = 0 hw_war 1 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240625042217.1303332-3-quic_rdevanat@quicinc.com
2024-07-01wifi: ath12k: Support Transmit Scheduler statsDinesh Karthikeyan
Add support to request transmission scheduler stats from firmware through HTT stats type 4. This stat gives information such as pdev stats scheduled per transmission queue, transmission queue command posted and reaped, scheduler order, scheduler ineligibility and supercycle triggers. Sample output: ------------- echo 4 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_TX_SCHED_CMN_TLV: mac_id = 0 current_timestamp = 952546828 HTT_TX_PDEV_STATS_SCHED_PER_TXQ_TLV: mac_id = 0 txq_id = 14 sched_policy = 2 ..... HTT_SCHED_TXQ_CMD_POSTED_TLV: sched_cmd_posted = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0 HTT_SCHED_TXQ_CMD_REAPED_TLV: sched_cmd_reaped = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0 HTT_SCHED_TXQ_SCHED_ORDER_SU_TLV: sched_order_su = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0 HTT_SCHED_TXQ_SCHED_INELIGIBILITY: sched_ineligibility = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0 HTT_SCHED_TXQ_SUPERCYCLE_TRIGGER: supercycle_triggers = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240625042217.1303332-2-quic_rdevanat@quicinc.com
2024-07-01wifi: ath12k: Dump additional Tx PDEV HTT statsRamya Gnanasekar
Support to dump additional Tx PDEV stats through HTT stats debugfs. Following stats dump are supported: 1. PDEV control path stat to dump Tx management frame count 2. Tx PDEV SIFS histogram stats 3. Tx MU MIMO PPDU stats for 802.11ac, 802.11ax and 802.11be Sample Output: --------------- echo 1 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_PDEV_STATS_CMN_TLV: mac_id = 0 comp_delivered = 0 self_triggers = 13 ...... ...... HTT_TX_PDEV_STATS_CTRL_PATH_TX_STATS: fw_tx_mgmt_subtype = 0:1, 1:0, 2:0, 3:0, 4:38, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:1, 12:0, 13:7, 14:0, 15:0 HTT_TX_PDEV_STATS_SIFS_HIST_TLV: sifs_hist_status = 0:237, 1:185, 2:1, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 HTT_TX_PDEV_AC_MU_PPDU_DISTRIBUTION_STATS: ac_mu_mimo_num_seq_posted_nr4 = 0 ac_mu_mimo_num_ppdu_posted_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_ppdu_completed_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_seq_term_status_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ac_mu_mimo_num_seq_posted_nr8 = 0 ac_mu_mimo_num_ppdu_posted_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_ppdu_completed_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_seq_term_status_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 HTT_TX_PDEV_AX_MU_PPDU_DISTRIBUTION_STATS: ax_mu_mimo_num_seq_posted_nr4 = 0 ax_mu_mimo_num_ppdu_posted_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_ppdu_completed_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_seq_term_status_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ax_mu_mimo_num_seq_posted_nr8 = 0 ax_mu_mimo_num_ppdu_posted_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_ppdu_completed_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_seq_term_status_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 HTT_TX_PDEV_BE_MU_PPDU_DISTRIBUTION_STATS: be_mu_mimo_num_seq_posted_nr4 = 0 be_mu_mimo_num_ppdu_posted_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_ppdu_completed_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_seq_term_status_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 be_mu_mimo_num_seq_posted_nr8 = 0 be_mu_mimo_num_ppdu_posted_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_ppdu_completed_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_seq_term_status_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-5-quic_rgnanase@quicinc.com
2024-07-01wifi: ath12k: Add support to parse requested stats_typeDinesh Karthikeyan
Add extended htt stats parser and print the corresponding TLVs associated with the requested htt_stats_type. Add support for TX PDEV related htt stats. Sample output: -------------- echo 1 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_PDEV_STATS_CMN_TLV: mac_id = 0 comp_delivered = 0 self_triggers = 256 hw_queued = 275 hw_reaped = 275 underrun = 241 hw_paused = 0 hw_flush = 0 hw_filt = 1 tx_abort = 0 ppdu_ok = 246 mpdu_requeued = 0 tx_xretry = 0 data_rc = 3 mpdu_dropped_xretry = 0 illegal_rate_phy_err = 0 cont_xretry = 0 tx_timeout = 0 tx_time_dur_data = 0 pdev_resets = 0 phy_underrun = 0 txop_ovf = 0 seq_posted = 247 seq_failed_queueing = 0 seq_completed = 247 seq_restarted = 0 seq_txop_repost_stop = 0 next_seq_cancel = 0 dl_mu_mimo_seq_posted = 0 dl_mu_ofdma_seq_posted = 0 ul_mu_mimo_seq_posted = 0 ul_mu_ofdma_seq_posted = 0 mu_mimo_peer_blacklisted = 0 seq_qdepth_repost_stop = 0 seq_min_msdu_repost_stop = 0 mu_seq_min_msdu_repost_stop = 0 seq_switch_hw_paused = 0 next_seq_posted_dsr = 0 seq_posted_isr = 0 seq_ctrl_cached = 0 mpdu_count_tqm = 0 msdu_count_tqm = 0 mpdu_removed_tqm = 0 msdu_removed_tqm = 0 remove_mpdus_max_retries = 0 mpdus_sw_flush = 0 mpdus_hw_filter = 0 mpdus_truncated = 0 mpdus_ack_failed = 0 mpdus_expired = 0 mpdus_seq_hw_retry = 0 ack_tlv_proc = 0 coex_abort_mpdu_cnt_valid = 0 coex_abort_mpdu_cnt = 5 num_total_ppdus_tried_ota = 5 num_data_ppdus_tried_ota = 0 local_ctrl_mgmt_enqued = 247 local_ctrl_mgmt_freed = 247 local_data_enqued = 0 local_data_freed = 0 mpdu_tried = 0 isr_wait_seq_posted = 0 tx_active_dur_us_low = 0 tx_active_dur_us_high = 0 fes_offsets_err_cnt = 0 HTT_TX_PDEV_STATS_URRN_TLV: urrn_stats = 0:0, 1:241, 2:0 HTT_TX_PDEV_STATS_SIFS_TLV: sifs_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 HTT_TX_PDEV_STATS_FLUSH_TLV: flush_errs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0, 38:0, 39:0, 40:0, 41:0, 42:0, 43:0, 44:0, 45:0, 46:0, 47:0, 48:0, 49:0, 50:0, 51:0, 52:0, 53:0, 54:0, 55:0, 56:0, 57:0, 58:0, 59:0, 60:0, 61:0, 62:0, 63:0, 64:0, 65:0, 66:0, 67:0, 68:0, 69:0, 70:0, 71:0, 72:0, 73:0, 74:0, 75:0, 76:0, 77:0, 78:0, 79:0, 80:0, 81:0, 82:0, 83:0, 84:0, 85:0, 86:0, 87:0, 88:0, 89:0, 90:0, 91:0, 92:0, 93:0, 94:0, 95:0, 96:0, 97:0, 98:0, 99:0, 100:0, 101:0, 102:0, 103:0, 104:0, 105:0, 106:0, 107:0, 108:0, 109:0, 110:0, 111:0, 112:0, 113:0, 114:0, 115:0, 116:0, 117:0, 118:0, 119:0, 120:0, 121:0, 122:0, 123:0, 124:0, 125:0, 126:0, 127:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-4-quic_rgnanase@quicinc.com
2024-07-01wifi: ath12k: Add htt_stats_dump file ops supportDinesh Karthikeyan
Add dump_htt_stats file operation to dump the stats value requested for the requested stats_type. Stats sent from firmware will be cumulative. Hence add debugfs to reset the requested stats type. Example with one ath12k device: ath12k `-- pci-0000:06:00.0 |-- mac0 `-- htt_stats |-- htt_stats_type |-- htt_stats_reset Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-3-quic_rgnanase@quicinc.com
2024-07-01wifi: ath12k: Add support to enable debugfs_htt_statsDinesh Karthikeyan
Create debugfs_htt_stats file when ath12k debugfs support is enabled. Add basic ath12k_debugfs_htt_stats_register and handle htt_stats_type file operations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-2-quic_rgnanase@quicinc.com
generated by cgit (git 2.34.1) at 2025-07-25 17:41:19 +0000