summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k/dp_tx.c
AgeCommit message (Collapse)Author
2025-05-19wifi: ath12k: Add device dp stats supportVinith Kumar R
Add support for data path related device specific stats. This information helps to debug connectivity and performance issues in AP, STA, and Mesh modes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250425012802.698914-3-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: change soc name to device nameVinith Kumar R
To have consistent nomenclature, replace the use of the term "soc" with the term "device". Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250425012802.698914-2-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add ring config for monitor mode on WCN7850Kang Yang
For WCN7850, it doesn't have an RX MON component(RX MON dest ring and RX MON buffer ring). So it can only reuse the mon status ring, RX refill ring, and error dst ring for monitor mode. Every time the hardware captures a packet, it will store status information into the status ring and store the MSDU payload buffer address into the error dst ring. When host reaps the MSDU payload and consumes a buffer, it will replenish the RX refill ring to indicate a new buffer. The configuration of the error dst/RX ring already exists. But there is no configuration for mon status ring. So add ring configuration for it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-5-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-04-17wifi: ath12k: Use skb->len for dma_unmap_single() length parameterP Praneesh
During dma_unmap_single() for extended skb, the driver currently uses sizeof() of the corresponding structure. When the allocation size changes, one of the parameters of dma_unmap_single() needs to be updated everywhere. Improve code readability by using skb->len instead of sizeof() the structure. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250411060154.1388159-5-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-04-17wifi: ath12k: Fix memory leak during extended skb allocationP Praneesh
In ath12k_dp_tx(), memory allocated for extended skb is not freed properly, causing a memory leak even when the host receives tx completion for those skbs. Fix this issue by storing skb_ext_desc in the host tx descriptor and using this skb_ext_desc field during completion or during ath12k_dp_cc_cleanup(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250411060154.1388159-4-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-04-17wifi: ath12k: Refactor tx descriptor handling in tx completion handlerP Praneesh
Current code uses mac_id and msdu parameters in ath12k_dp_tx_free_txbuf() and ath12k_dp_tx_process_htt_tx_complete(). Since these parameters are already encapsulated by struct ath12k_dp_tx_desc, passing them individually results in redundant arguments. Introduce struct ath12k_tx_desc_params to capture the skb, mac_id, and pass it to the corresponding functions. Refactor these functions to use struct ath12k_tx_desc_params instead, reducing the number of arguments and improving function argument handling efficiency. Additionally, use struct ath12k_tx_desc_params in ath12k_dp_tx_htt_tx_complete_buf() and ath12k_dp_tx_complete_msdu(), which will be utilized for fetching extended skb in a future patch. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250411060154.1388159-3-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-04-17wifi: ath12k: Handle error cases during extended skb allocationP Praneesh
Currently, in the case of extended skb allocation, the buffer is freed before the DMA unmap operation. This premature deletion can result in skb->data corruption, as the memory region could be re-allocated for other purposes. Fix this issue by reordering the failure cases by calling dma_unmap_single() first, then followed by the corresponding kfree_skb(). This helps avoid data corruption in case of failures in dp_tx(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250411060154.1388159-2-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-04-11wifi: ath12k: Add support for link specific datapath statsBalamurugan Mahalingam
Add support to record the number of frames enqueued, hardware descriptor type, encapsulation/encryption types used, frames dropped and completed. This is useful for understanding the datapath performance and tune the peak throughput. The link specific stats can be viewed through the below debugfs file cat /sys/kernel/debug/ieee80211/phy0/netdev:wlan1/link_stats link[0] Tx Unicast Frames Enqueued = 9 link[0] Tx Broadcast Frames Enqueued = 78689 link[0] Tx Frames Completed = 78698 link[0] Tx Frames Dropped = 0 link[0] Tx Frame descriptor Encap Type = raw:0 native wifi:78698 ethernet:0 link[0] Tx Frame descriptor Encrypt Type = 0:78698 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 link[0] Tx Frame descriptor Type = buffer:78698 extension:0 ------------------------------------------------------ link[1] Tx Unicast Frames Enqueued = 0 link[1] Tx Broadcast Frames Enqueued = 78689 link[1] Tx Frames Completed = 78689 link[1] Tx Frames Dropped = 0 link[1] Tx Frame descriptor Encap Type = raw:0 native wifi:78689 ethernet:0 link[1] Tx Frame descriptor Encrypt Type = 0:78689 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 link[1] Tx Frame descriptor Type = buffer:78689 extension:0 ------------------------------------------------------ Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Link: https://patch.msgid.link/20250409155125.299380-1-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-04-07wifi: ath12k: Fix memory leak during vdev_id mismatchP Praneesh
Currently driver enables vdev_id check as part of the bank configuration in ath12k_dp_tx_get_vdev_bank_config(). This check ensures that the vdev_id configured in the bank register aligns with the vdev_id in the packet's address search table within the firmware. If there is a mismatch, the firmware forwards the packet with the HTT status HAL_WBM_REL_HTT_TX_COMP_STATUS_VDEVID_MISMATCH. Since driver does not handle this vdev_id mismatch HTT status, the corresponding buffers are not freed properly, causing a memory leak. Fix this issue by adding handling to free the buffers when a vdev_id mismatch HTT status is encountered. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ- Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Link: https://patch.msgid.link/20250402174032.2651221-1-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-03-27wifi: ath12k: add monitor interface support on QCN9274P Praneesh
Currently, the monitor interface is not supported. To support the monitor interface, configure the monitor vdev state identifier, configure the HTT filter setup, subscribe the mac80211 NO_VIRTUAL_MONITOR feature, remove the VIRTUAL_MONITOR handler procedures since align to NO_VIRTUAL_MONITOR feature and prevent monitor interface to transmit packet. Therefore, add these procedures to add monitor interface support and enable the monitor interface support on the QCN9274 platform through the hardware parameter. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250324062518.2752822-11-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-28wifi: ath12k: Report proper tx completion status to mac80211Vinith Kumar R
Currently Tx completion for few exception packets are received from firmware and the tx status updated to mac80211. The tx status values of HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP and HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL are considered as tx failure and reported as tx failure to mac80211. But these failure status is due to internal firmware tx drop and these packets were not tried to transmit in the air. In case of mesh this invalid tx status report might trigger mpath broken issue due to increase in mpath fail average. So do not report these tx status as tx failure instead free the skb by calling ieee80211_free_txskb(), and that will be accounted as dropped frame. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241122173432.2064858-1-quic_tamizhr@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-20wifi: ath12k: Add missing htt_metadata flag in ath12k_dp_tx()Nicolas Escande
When AP-VLAN support was added, the HTT_TCL_META_DATA_VALID_HTT flag was not added to the tx_info's meta_data_flags. Without this flag the firmware seems to reject all the broadcast (ap-vlan) frames. So add the flag, just as ath11k did it in the downstream QSDK project[1]. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: 26dd8ccdba4d ("wifi: ath12k: dynamic VLAN support") Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Link: https://git.codelinaro.org/clo/qsdk/oss/system/feeds/wlan-open/-/blob/win.wlan_host_opensource.3.0.r24/patches/ath11k/207-ath11k-Add-support-for-dynamic-vlan.patch # [1] Link: https://patch.msgid.link/20250124113331.93476-1-nico.escande@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add support for MLO Multicast handling in driverBalamurugan Mahalingam
For MLO netdevice, the broadcast frame should be transmitted with the same sequence number on all the links. Per IEEE 802.11be-2024 section 10.3.2.14.2 "Transmitter requirements", An AP MLD shall use SNS11 in Table 10-5 (Transmitter sequence number spaces) maintained by the MLD to determine the sequence number of a group addressed data frame that is transmitted by an AP affiliated with the AP MLD so that the same group addressed Data frame transmitted over multiple links by the AP MLD uses the same sequence number for transmission on each link. Currently the MLO multicast handling is done in the mac80211 layer. Enable support for handling MLO Multicast in the driver to update the hardware descriptors in a custom way to handle the multicast frames. Firmware expects the MLO multicast frames to the submitted to the hardware with special vdev_id (actual vdev_id + 128) to recognize it as a host inspected frame to avoid using the reinjected path and it also uses the multicast global sequence number (GSN) provided by the host in the HTT metadata to process and transmit it with the same sequence number. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250203212647.2694566-3-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Update HTT_TCL_METADATA version and bit mask definitionsBalamurugan Mahalingam
Update the HTT_TCL_METADATA version to the latest version (2) as the bit definitions have changed a little to support more features. This new version allows the host to submit a packet with more information to the firmware. Firmware uses this additional information to do special processing for certain frames. All the firmware binaries available in upstream/public are compatible with this HTT version update. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250203212647.2694566-2-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-31wifi: ath12k: fix ath12k_hal_tx_cmd_ext_desc_setup() info1 overrideNicolas Escande
Since inception there is an obvious typo laying around in ath12k_hal_tx_cmd_ext_desc_setup(). Instead of initializing + adding flags to tcl_ext_cmd->info1, we initialize + override. This will be needed in the future to make broadcast frames work with ethernet encapsulation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250127071306.1454699-1-nico.escande@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: Enable filter config for monitor destination ringP Praneesh
Add provision to configure monitor filter for the destination ring. These filters are used for requesting statistics or monitor mode through the monitor destination ring. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Link: https://patch.msgid.link/20241223060132.3506372-3-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: Add HTT source ring ID for monitor ringsP Praneesh
Add source buffer ring and destination buffer ring ID for monitor rings. These IDs are used for ring configuration during initial ring setup. Since monitor rings are enabled based on the rxdma1_enable flag, enable it in the hardware param for the QCN9274 version 2 hardware and increase the destination ring size to handle MSDU data buffers. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Link: https://patch.msgid.link/20241223060132.3506372-2-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: report station mode transmit rateLingbo Kong
Currently, the transmit rate of "iw dev xxx station dump" command always show an invalid value. To address this issue, ath12k parse the info of transmit complete report from firmware and indicate the transmit rate to mac80211. This patch affects the station mode of WCN7850 and QCN9274. After that, "iw dev xxx station dump" show the correct transmit rate. Such as: Station 00:03:7f:12:03:03 (on wlo1) inactive time: 872 ms rx bytes: 219111 rx packets: 1133 tx bytes: 53767 tx packets: 462 tx retries: 51 tx failed: 0 beacon loss: 0 beacon rx: 403 rx drop misc: 74 signal: -95 dBm beacon signal avg: -18 dBm tx bitrate: 1441.1 MBit/s 80MHz EHT-MCS 13 EHT-NSS 2 EHT-GI 0 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219715 Link: https://patch.msgid.link/20250115063537.35797-2-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-23wifi: ath12k: fix skb_ext_desc leak in ath12k_dp_tx() error pathNicolas Escande
When vlan support was added, we missed that when ath12k_dp_prepare_htt_metadata() returns an error we also need to free the skb holding the metadata before going on with the cleanup process. Compile tested only. Fixes: 26dd8ccdba4d ("wifi: ath12k: dynamic VLAN support") Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250122160112.3234558-1-nico.escande@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-10-16wifi: ath12k: prepare vif data structure for MLO handlingSriram R
To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-08-05wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850Baochen Qiang
In transmit path, it is likely that the iova is not aligned to PCIe TLP max payload size, which is 128 for WCN7850. Normally in such cases hardware is expected to split the packet into several parts in a manner such that they, other than the first one, have aligned iova. However due to hardware limitations, WCN7850 does not behave like that properly with some specific unaligned iova in transmit path. This easily results in target hang in a KPI transmit test: packet send/receive failure, WMI command send timeout etc. Also fatal error seen in PCIe level: ... Capabilities: ... ... DevSta: ... FatalErr+ ... ... ... Work around this by manually moving/reallocating payload buffer such that we can map it to a 128 bytes aligned iova. The moving requires sufficient head room or tail room in skb: for the former we can do ourselves a favor by asking some extra bytes when registering with mac80211, while for the latter we can do nothing. Moving/reallocating buffer consumes additional CPU cycles, but the good news is that an aligned iova increases PCIe efficiency. In my tests on some X86 platforms the KPI results are almost consistent. Since this is seen only with WCN7850, add a new hardware parameter to differentiate from others. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Cc: <stable@vger.kernel.org> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240715023814.20242-1-quic_bqiang@quicinc.com
2024-07-01wifi: ath12k: Add htt_stats_dump file ops supportDinesh Karthikeyan
Add dump_htt_stats file operation to dump the stats value requested for the requested stats_type. Stats sent from firmware will be cumulative. Hence add debugfs to reset the requested stats type. Example with one ath12k device: ath12k `-- pci-0000:06:00.0 |-- mac0 `-- htt_stats |-- htt_stats_type |-- htt_stats_reset Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-3-quic_rgnanase@quicinc.com
2024-05-20wifi: ath12k: dynamic VLAN supportMuna Sinada
Add support for dynamic VLAN. VLAN group traffic is encapsulated and encrypted in mac80211 and driver needs to set flags for the VLAN group traffic to skip hardware encapsulation and encryption. VLAN group traffic utilizes ext MSDU and HTT Metadata to set encapsulation type to RAW and encryption type to OPEN in order to inform firmware to skip hardware encapsulation and encryption. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240515192830.995013-1-quic_msinada@quicinc.com
2024-05-17wifi: ath12k: fix ack signal strength calculationLingbo Kong
Currently, the calculation of ack signal strength is incorrect. This is because before calculating the ack signal strength, ath12k need to determine whether the hardware and firmware support db2dbm. If the hardware and firmware support db2dbm, do not need to add noise floor, otherwise, need to add noise floor. Besides, the value of ack_rssi passed by firmware to ath12k should be a signed number, so change its type to s8. This patch affects QCN9274 and WCN7850 because they have the same issue. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240511030917.65811-1-quic_lingbok@quicinc.com
2024-05-13wifi: ath12k: fix misspelling of "dma" in num_rxmda_per_pdevJeff Johnson
The ath12k_hw_params member num_rxmda_per_pdev contains a misspelling of "dma" so fix it. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240504-ath12k_dp_rxdma_ring_sel_config_wcn7850-ret-v1-1-44d2843a2857@quicinc.com
2024-05-07wifi: ath12k: Remove unsupported tx monitor handlingTamizh Chelvam Raja
Currently tx monitor is not supported in driver. So remove the tx monitor ring configuration, allocation and handling. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430091414.2486196-3-quic_tamizhr@quicinc.com
2024-05-07wifi: ath12k: fix calling correct function for rx monitor modeTamizh Chelvam Raja
Currently in ath12k_dp_tx_htt_monitor_mode_ring_config() ath12k_dp_tx_htt_tx_monitor_mode_ring_config() function wrongly called twice. Fix that by calling ath12k_dp_tx_htt_rx_monitor_mode_ring_config(). Currently monitor mode is disabled in driver so the change is compile tested and boot sequence verified. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430091414.2486196-2-quic_tamizhr@quicinc.com
2024-05-03wifi: ath12k: drop failed transmitted frames from metric calculation.Karthikeyan Kathirvel
In mesh node traffic, internal firmware-transmitted failures are reported as transmitted failures in mesh metric calculation, leading to the breakage of the mesh link. Fix the issue by dropping the internal firmware-transmitted failures before updating the TX completion status to mac80211, in order to prevent false failure averaging in mesh metric calculation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430074313.885807-3-quic_kathirve@quicinc.com
2024-05-03wifi: ath12k: Don't drop tx_status in failure caseSven Eckelmann
When a station idles for a long time, hostapd will try to send a QoS Null frame to the station as "poll". NL80211_CMD_PROBE_CLIENT is used for this purpose. And the skb will be added to ack_status_frame - waiting for a completion via ieee80211_report_ack_skb(). But when the peer was already removed before the tx_complete arrives, the peer will be missing. And when using dev_kfree_skb_any (instead of going through mac80211), the entry will stay inside ack_status_frames thus not clean up related information in its internal data structures. This IDR will therefore run full after 8K request were generated for such clients. At this point, the access point will then just stall and not allow any new clients because idr_alloc() for ack_status_frame will fail. ieee80211_free_txskb() on the other hand will (when required) call ieee80211_report_ack_skb() and make sure that (when required) remove the entry from the ack_status_frame and clean up related information in its internal data structures. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-1-c0af729d6229@narfation.org Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240430074313.885807-2-quic_kathirve@quicinc.com
2024-03-20wifi: ath12k: fix desc address calculation in wbm tx completionThiraviyam Mariyappan
In tx completion, status desc is obtained from offsetting the address from wbm ring. Having HTT_TX_WBM_COMP_STATUS_OFFSET(8) and reserved 8 bytes in status desc offsets the address twice and read the values from the incorrect address. Hence, remove the HTT_TX_WBM_COMP_STATUS_OFFSET from wbm completion address calculation. Also this patch is applicable for WCN7850. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240311180708.9334-1-quic_tmariyap@quicinc.com
2024-02-02wifi: ath12k: subscribe required word mask from rx tlvKarthikeyan Kathirvel
Most of the RX descriptors fields are currently not used in the ath12k driver. Hence add support to selectively subscribe to the required quad words (64 bits) within msdu_end and mpdu_start of rx_desc. Add compact rx_desc structures and configure the bit mask for Rx TLVs (msdu_end, mpdu_start, mpdu_end) via registers. With these registers SW can configure to DMA the partial TLV struct to Rx buffer. Each TLV type has its own register to configure the mask value. The mask value configured in register will indicate if a particular QWORD has to be written to rx buffer or not i.e., if Nth bit is enabled in the mask Nth QWORD will be written and it will not be written if the bit is disabled in mask. While 0th bit indicates whether TLV tag will be written or not. Advantages of Qword subscription of TLVs - Avoid multiple cache-line misses as the all the required fields of the TLV are within 128 bytes. - Memory optimization as TLVs + DATA + SHINFO can fit in 2k buffer even for 64 bit kernel. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-10-quic_rajkbhag@quicinc.com
2024-01-19wifi: ath12k: Refactor the mac80211 hw access from link/radioKarthikeyan Periyasamy
Currently, mac80211 hardware accesses link/radio structure directly in multiple locations. Introduce helper function to avoid this direct access, as this change will facilitate refactoring for Multi-link operation support. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240118010320.3918136-2-quic_periyasa@quicinc.com
2024-01-18wifi: ath12k: replace ENOTSUPP with EOPNOTSUPPKarthikeyan Periyasamy
ENOTSUPP is not a standard error code, don't use it. Replace with EOPNOTSUPP instead. No functional changes, compile tested only. Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240117080431.2907471-2-quic_periyasa@quicinc.com
2023-11-30wifi: ath12k: Update Qualcomm Innovation Center, Inc. copyrightsJeff Johnson
Update the copyright for all ath12k files modified on behalf of Qualcomm Innovation Center, Inc. in 2023. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-1-be0b7408cbac@quicinc.com
2023-10-23wifi: mac80211: rename ieee80211_tx_status() to ieee80211_tx_status_skb()Kalle Valo
make htmldocs warns: Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117. Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'. This is because there's a function named ieee80211_tx_status() and a struct named ieee80211_tx_status. This has been discussed previously but no solution found: https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/ There's also a bug open for three years with no solution in sight: https://github.com/sphinx-doc/sphinx/pull/8313 So I guess we have no other solution than to a workaround this in the code, for example to rename the function to ieee80211_tx_status_skb() to avoid the name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in which the skb is not provided as an argument, instead with ieee80211_tx_status_skb() the skb is provided. Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-21wifi: ath12k: Remove unnecessary (void*) conversionsWu Yunchuan
No need cast (void*) to (struct hal_rx_ppdu_end_user_stats *), (struct ath12k_rx_desc_info *) or (struct hal_tx_msdu_ext_desc *). Change the prototype to remove the local variable. Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230919045142.524226-1-yunchuan@nfschina.com
2023-09-21wifi: ath12k: fix DMA unmap warning on NULL DMA addressBaochen Qiang
In ath12k_dp_tx(), if we reach fail_dma_unmap due to some errors, current code does DMA unmap unconditionally on skb_cb->paddr_ext_desc. However, skb_cb->paddr_ext_desc may be NULL and thus we get below warning: kernel: [ 8887.076212] WARNING: CPU: 3 PID: 0 at drivers/iommu/dma-iommu.c:1077 iommu_dma_unmap_page+0x79/0x90 Fix it by checking skb_cb->paddr_ext_desc before unmap it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230830021131.5610-1-quic_bqiang@quicinc.com
2023-08-23wifi: ath12k: Fix a few spelling errorsJeff Johnson
Fix a few issues flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-3-8e2698759564@quicinc.com
2023-08-02wifi: ath12k: Use pdev_id rather than mac_id to get pdevBaochen Qiang
We are seeing kernel crash in below test scenario: 1. make DUT connect to an WPA3 encrypted 11ax AP in Ch44 HE80 2. use "wpa_cli -i <inf> disconnect" to disconnect 3. wait for DUT to automatically reconnect Kernel crashes while waiting, below shows the crash stack: [ 755.120868] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 755.120871] #PF: supervisor read access in kernel mode [ 755.120872] #PF: error_code(0x0000) - not-present page [ 755.120873] PGD 0 P4D 0 [ 755.120875] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 755.120876] CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 5.19.0-rc1+ #3 [ 755.120878] Hardware name: Intel(R) Client Systems NUC11PHi7/NUC11PHBi7, BIOS PHTGL579.0063.2021.0707.1057 07/07/2021 [ 755.120879] RIP: 0010:ath12k_dp_process_rx_err+0x2b6/0x14a0 [ath12k] [ 755.120890] Code: 01 c0 48 c1 e0 05 48 8b 9c 07 b8 b2 00 00 48 c7 c0 61 ff 0e c1 48 85 db 53 48 0f 44 c6 48 c7 c6 80 9d 0f c1 50 e8 1a 25 00 00 <4c> 8b 3b 4d 8b 76 14 41 59 41 5a 41 8b 87 78 43 01 00 4d 85 f6 89 [ 755.120891] RSP: 0018:ffff9a93402c8d10 EFLAGS: 00010282 [ 755.120892] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000303 [ 755.120893] RDX: 0000000000000000 RSI: ffffffff93b7cbe9 RDI: 00000000ffffffff [ 755.120894] RBP: ffff9a93402c8e50 R08: ffffffff93e65360 R09: ffffffff942e044d [ 755.120894] R10: 0000000000000000 R11: 0000000000000063 R12: ffff8dbec5420000 [ 755.120895] R13: ffff8dbec5420000 R14: ffff8dbdefe9a0a0 R15: ffff8dbec5420000 [ 755.120896] FS: 0000000000000000(0000) GS:ffff8dc2705c0000(0000) knlGS:0000000000000000 [ 755.120897] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 755.120898] CR2: 0000000000000000 CR3: 0000000107be4005 CR4: 0000000000770ee0 [ 755.120898] PKRU: 55555554 [ 755.120899] Call Trace: [ 755.120900] <IRQ> [ 755.120903] ? ath12k_pci_write32+0x2e/0x80 [ath12k] [ 755.120910] ath12k_dp_service_srng+0x214/0x2e0 [ath12k] [ 755.120917] ath12k_pci_ext_grp_napi_poll+0x26/0x80 [ath12k] [ 755.120923] __napi_poll+0x2b/0x1c0 [ 755.120925] net_rx_action+0x2a1/0x2f0 [ 755.120927] __do_softirq+0xfa/0x2e9 [ 755.120929] irq_exit_rcu+0xb9/0xd0 [ 755.120932] common_interrupt+0xc1/0xe0 [ 755.120934] </IRQ> [ 755.120934] <TASK> [ 755.120935] asm_common_interrupt+0x2c/0x40 [ 755.120936] RIP: 0010:cpuidle_enter_state+0xdd/0x3a0 [ 755.120938] Code: 00 31 ff e8 45 e2 74 ff 80 7d d7 00 74 16 9c 58 0f 1f 40 00 f6 c4 02 0f 85 a0 02 00 00 31 ff e8 69 79 7b ff fb 0f 1f 44 00 00 <45> 85 ff 0f 88 6d 01 00 00 49 63 d7 4c 2b 6d c8 48 8d 04 52 48 8d [ 755.120939] RSP: 0018:ffff9a934018be50 EFLAGS: 00000246 [ 755.120940] RAX: ffff8dc2705c0000 RBX: 0000000000000002 RCX: 000000000000001f [ 755.120941] RDX: 000000afd0b532d3 RSI: ffffffff93b7cbe9 RDI: ffffffff93b8b66e [ 755.120942] RBP: ffff9a934018be88 R08: 0000000000000002 R09: 0000000000030500 [ 755.120942] R10: ffff9a934018be18 R11: 0000000000000741 R12: ffffba933fdc0600 [ 755.120943] R13: 000000afd0b532d3 R14: ffffffff93fcbc60 R15: 0000000000000002 [ 755.120945] cpuidle_enter+0x2e/0x40 [ 755.120946] call_cpuidle+0x23/0x40 [ 755.120948] do_idle+0x1ff/0x260 [ 755.120950] cpu_startup_entry+0x1d/0x20 [ 755.120951] start_secondary+0x10d/0x130 [ 755.120953] secondary_startup_64_no_verify+0xd3/0xdb [ 755.120956] </TASK> [ 755.120956] Modules linked in: michael_mic rfcomm cmac algif_hash algif_skcipher af_alg bnep qrtr_mhi intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio kvm_intel qrtr snd_hda_codec_hdmi kvm irqbypass ath12k snd_hda_intel snd_seq_midi crct10dif_pclmul mhi ghash_clmulni_intel snd_intel_dspcfg snd_seq_midi_event aesni_intel qmi_helpers i915 snd_rawmidi crypto_simd snd_hda_codec cryptd cec intel_cstate snd_hda_core mac80211 rc_core nouveau snd_seq snd_hwdep btusb drm_buddy drm_ttm_helper nls_iso8859_1 snd_pcm ttm btrtl snd_seq_device wmi_bmof mxm_wmi input_leds cfg80211 joydev btbcm drm_display_helper snd_timer btintel mei_me libarc4 drm_kms_helper bluetooth i2c_algo_bit snd fb_sys_fops syscopyarea mei sysfillrect ecdh_generic soundcore sysimgblt ecc acpi_pad mac_hid sch_fq_codel ipmi_devintf ipmi_msghandler msr parport_pc ppdev lp ramoops parport reed_solomon drm efi_pstore ip_tables x_tables autofs4 [ 755.120992] hid_generic usbhid hid ax88179_178a usbnet mii nvme nvme_core rtsx_pci_sdmmc crc32_pclmul i2c_i801 intel_lpss_pci i2c_smbus intel_lpss rtsx_pci idma64 virt_dma vmd wmi video [ 755.121002] CR2: 0000000000000000 The crash is because, for WCN7850, only ab->pdev[0] is initialized, while mac_id here is misused to retrieve pdev and it is not zero, leading to a NULL pointer access. Fix this issue by getting pdev_id first and then use it to retrieve pdev. Also fix some other code snippets which have the same issue. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230714080658.3140-1-quic_bqiang@quicinc.com
2023-03-24wifi: ath12k: fix packets are sent in native wifi mode while we set raw modeAaradhana Sahu
Currently, if we set raw mode as encap type, packets are sent in native wifi mode which is default mode. This is caused by no check being present for raw mode in ath12k_dp_tx_get_encap_type function, so it's always going in native wifi mode. Fix, this issue by adding check condition for raw mode. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230320052427.12271-1-quic_aarasahu@quicinc.com
2023-02-20wifi: ath12k: use kfree_skb() instead of kfree()Dan Carpenter
Sk_buffs are supposed to be freed with kfree_skb(). Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/Y+4ejiYakhEvEw7c@kili
2022-11-29wifi: ath12k: driver for Qualcomm Wi-Fi 7 devicesKalle Valo
ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
generated by cgit (git 2.34.1) at 2025-07-25 19:19:56 +0000