summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k/qmi.h
AgeCommit message (Collapse)Author
2025-04-11wifi: ath12k: reset MLO global memory during recoveryAditya Kumar Singh
When operating with multiple devices grouped together, the firmware stores data related to the state machine of each partner device in the MLO global memory region. If the firmware crashes, it updates the state to 'crashed'. During recovery, this memory is shared with the firmware again, and upon detecting the 'crashed' state, it reasserts. This leads to a loop of firmware asserts and it never recovers. Hence to fix this issue, once all devices in the group have been asserted and powered down, reset the MLO global memory region. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-9-95e7bf048595@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-03-25wifi: ath12k: add ath12k_hw_params for IPQ5332Balamurugan S
Add ath12k_hw_params for new ath12k AHB based WiFi device IPQ5332. Some hardware parameters like hw_ops, wmi_init & hal_ops are same between IPQ5332 and QCN9274, hence use these same parameters for IPQ5332. Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Signed-off-by: Balamurugan S <quic_bselvara@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Link: https://patch.msgid.link/20250321-ath12k-ahb-v12-4-bb389ed76ae5@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: add support to allocate MLO global memory regionKarthikeyan Periyasamy
To enable Multi-Link Operation (MLO), QCN9274 firmware requests MLO global memory (MLO_GLOBAL_MEM_REGION_TYPE). This memory region is shared across all the firmware (SoC) that are participation in the MLO. Hence, add support to allocate and free MLO global memory region. Allocate one MLO global memory per struct ath12k_hw_group and assign the same memory to all firmware in the same struct ath12k_hw_group. WCN7850 firmware does not request this memory type, therefore this change will have no impact on WCN7850 device. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-6-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-05wifi: ath12k: send QMI host capability after device group is readyKarthikeyan Periyasamy
QMI host capability has the information regarding MLO parameters such as device_id, MLO capability, group id and the information of each devices involved in the group and sent immediately on QMI server arrive event. Currently, only one device is involved in the group and hence, single device information is sent as part of MLO capability of host. But, in future when multi device group abstraction is introduced, host should send all the device information involved in the group as part of QMI MLO host capability rather than single device. Hence, sending QMI host capability immediately on server arrive of a device might not be ideal for multi device group abstraction as the details of other devices in the group would not be available. Hence, once QMI server arrive event is received, request for QMI PHY capabilities of device, and defer the host capability send for that device. After QMI PHY capability is received for all the devices in the group trigger the host capability event for the deferred devices in the group. Hence, add changes to defer the QMI host capability event until the device group is ready and then resume the QMI exchange for all the device with host capabilities. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241204163216.433795-7-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-04-24wifi: ath12k: read single_chip_mlo_support parameter from QMI PHY capabilityRaj Kumar Bhagat
New parameter 'single_chip_mlo_support' was added in QMI PHY capability response message. This is an optional parameter added in QCN9274 firmware. This parameter states if the firmware supports Single-Link Operation (SLO) and Multi-Link Operation (MLO) within the same device. If single_chip_mlo_support = 1, then intra device SLO/MLO is supported in the firmware. If single_chip_mlo_support = 0, then intra device SLO/MLO is not supported in the firmware. Hence, add support to read 'single_chip_mlo_support' parameter from the QMI PHY capability response message. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240418125609.3867730-2-quic_rajkbhag@quicinc.com
2024-04-23wifi: ath12k: fix kernel crash during resumeBaochen Qiang
Currently during resume, QMI target memory is not properly handled, resulting in kernel crash in case DMA remap is not supported: BUG: Bad page state in process kworker/u16:54 pfn:36e80 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80 page dumped because: nonzero _refcount Call Trace: bad_page free_page_is_bad_report __free_pages_ok __free_pages dma_direct_free dma_free_attrs ath12k_qmi_free_target_mem_chunk ath12k_qmi_msg_mem_request_cb The reason is: Once ath12k module is loaded, firmware sends memory request to host. In case DMA remap not supported, ath12k refuses the first request due to failure in allocating with large segment size: ath12k_pci 0000:04:00.0: qmi firmware request memory request ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144 ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size ath12k_pci 0000:04:00.0: qmi delays mem_request 2 ath12k_pci 0000:04:00.0: qmi firmware request memory request Later firmware comes back with more but small segments and allocation succeeds: ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 Now ath12k is working. If suspend is triggered, firmware will be reloaded during resume. As same as before, firmware requests two large segments at first. In ath12k_qmi_msg_mem_request_cb() segment count and size are assigned: ab->qmi.mem_seg_count == 2 ab->qmi.target_mem[0].size == 7077888 ab->qmi.target_mem[1].size == 8454144 Then allocation failed like before and ath12k_qmi_free_target_mem_chunk() is called to free all allocated segments. Note the first segment is skipped because its v.addr is cleared due to allocation failure: chunk->v.addr = dma_alloc_coherent() Also note that this leaks that segment because it has not been freed. While freeing the second segment, a size of 8454144 is passed to dma_free_coherent(). However remember that this segment is allocated at the first time firmware is loaded, before suspend. So its real size is 524288, much smaller than 8454144. As a result kernel found we are freeing some memory which is in use and thus crashed. So one possible fix would be to free those segments during suspend. This works because with them freed, ath12k_qmi_free_target_mem_chunk() does nothing: all segment addresses are NULL so dma_free_coherent() is not called. But note that ath11k has similar logic but never hits this issue. Reviewing code there shows the luck comes from QMI memory reuse logic. So the decision is to port it to ath12k. Like in ath11k, the crash is avoided by adding prev_size to target_mem_chunk structure and caching real segment size in it, then prev_size instead of current size is passed to dma_free_coherent(), no unexpected memory is freed now. Also reuse m3 buffer. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240419034034.2842-1-quic_bqiang@quicinc.com
2024-02-02wifi: ath12k: Add logic to write QRTR node id to scratchP Praneesh
Currently only one MHI device is registered successfully on platform having two or more identical MHI devices. This is beacuse QMI service runs with identical QRTR node ID. And, qrtr-lookup cannot register more than one QMI service with identical node ID. Hence, generate a unique QRTR instance ID from PCIe domain number and bus number. QMI allows node id to be written on scratch register. Add logic to write QRTR node id to the register. It is available for firmware to uniquely identify an instance. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-6-quic_rajkbhag@quicinc.com
2024-01-19wifi: ath12k: add support for collecting firmware logBaochen Qiang
Currently there is no way to collect firmware log because firmware does not send it to host. Also host does not handle WMI_DIAG_EVENTID which is used by firmware to upload firmware log. So add support for it by firstly enabling firmware log upload via a QMI message, and secondly processing WMI DIAG event to expose it to userspace via trace event. This change applies to both WCN7850 and QCN9274. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240115023726.2866-1-quic_bqiang@quicinc.com
2024-01-17wifi: ath12k: add QMI PHY capability learn supportKarthikeyan Periyasamy
Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2023-11-30wifi: ath12k: Update Qualcomm Innovation Center, Inc. copyrightsJeff Johnson
Update the copyright for all ath12k files modified on behalf of Qualcomm Innovation Center, Inc. in 2023. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-1-be0b7408cbac@quicinc.com
2023-10-12wifi: ath12k: add ath12k_qmi_free_resource() for recoveryWen Gong
ath12k_qmi_free_target_mem_chunk() and ath12k_qmi_m3_free() is static in qmi.c, they are needed for recovery, export them in a new function Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230721055305.20420-3-quic_wgong@quicinc.com
2023-08-25wifi: ath12k: Remove unused declarationsYue Haibing
Commit d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") declared but never implemented these, remove it. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230816130550.50896-1-yuehaibing@huawei.com
2023-04-26wifi: ath12k: set PERST pin no pull request for WCN7850Carl Huang
The PCIe PERST pin is currently pulled down on WCN7850 and it causes some power leakage. Fix it by notifying firmware not to pull down PCIe PERST pin in QMI message for WCN7850. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230404032057.3236122-3-quic_cjhuang@quicinc.com
2023-01-18wifi: ath12k: Add new qmi_bdf_type to handle caldataDinesh Karthikeyan
With current implementation, the calibration data download request, is sent twice incorrectly because the request for ELF_TYPE and REGDB_TYPE are handled in a common api ath12k_qmi_load_bdf_qmi. Add new type as ATH12K_QMI_BDF_TYPE_CALIBRATION to send calibration data download request as a separate case. With this the firmware is indicated to read caldata from EEPROM. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221223050646.27785-3-quic_dinek@quicinc.com
2023-01-18wifi: ath12k: Fix incorrect qmi_file_type enum valuesDinesh Karthikeyan
Enum value for caldata in QMI_WLANFW_BDF_DOWNLOAD_REQ_V01 is set as 1 which is reserved for BDF_TYPE_ELF. The expected qmi_file_type value for caldata is 2. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221223050646.27785-2-quic_dinek@quicinc.com
2022-11-29wifi: ath12k: driver for Qualcomm Wi-Fi 7 devicesKalle Valo
ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
generated by cgit (git 2.34.1) at 2025-07-25 19:21:30 +0000