summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtw89/pci.c
AgeCommit message (Collapse)Author
2025-05-16wifi: rtw89: pci: enlarge retry times of RX tag to 1000Ping-Ke Shih
RX tag is sequence number to ensure RX DMA is complete. On platform Gigabyte X870 AORUS ELITE WIFI7, sometimes it needs longer retry times to complete RX DMA, or driver throws warnings and connection drops: rtw89_8922ae 0000:07:00.0: failed to update 162 RXBD info: -11 rtw89_8922ae 0000:07:00.0: failed to update 163 RXBD info: -11 rtw89_8922ae 0000:07:00.0: failed to update 32 RXBD info: -11 rtw89_8922ae 0000:07:00.0: failed to release TX skbs Fixes: 0bc7d1d4e63c ("wifi: rtw89: pci: validate RX tag for RXQ and RPQ") Reported-by: Samuel Reyes <zohrlaffz@gmail.com> Closes: https://lore.kernel.org/linux-wireless/f4355539f3ac46bbaf9c586d059a8cbb@realtek.com/T/#t Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250509013433.7573-1-pkshih@realtek.com
2025-05-16wifi: rtw89: pci: configure manual DAC mode via PCI config API onlyPing-Ke Shih
To support 36-bit DMA, configure chip proprietary bit via PCI config API or chip DBI interface. However, the PCI device mmap isn't set yet and the DBI is also inaccessible via mmap, so only if the bit can be accessible via PCI config API, chip can support 36-bit DMA. Otherwise, fallback to 32-bit DMA. With NULL mmap address, kernel throws trace: BUG: unable to handle page fault for address: 0000000000001090 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 71 Comm: irq/26-pciehp Tainted: G OE 6.14.2-061402-generic #202504101348 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:rtw89_pci_ops_write16+0x12/0x30 [rtw89_pci] RSP: 0018:ffffb0ffc0acf9d8 EFLAGS: 00010206 RAX: ffffffffc158f9c0 RBX: ffff94865e702020 RCX: 0000000000000000 RDX: 0000000000000718 RSI: 0000000000001090 RDI: ffff94865e702020 RBP: ffffb0ffc0acf9d8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000015 R13: 0000000000000719 R14: ffffb0ffc0acfa1f R15: ffffffffc1813060 FS: 0000000000000000(0000) GS:ffff9486f3480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001090 CR3: 0000000090440001 CR4: 00000000000626f0 Call Trace: <TASK> rtw89_pci_read_config_byte+0x6d/0x120 [rtw89_pci] rtw89_pci_cfg_dac+0x5b/0xb0 [rtw89_pci] rtw89_pci_probe+0xa96/0xbd0 [rtw89_pci] ? __pfx___device_attach_driver+0x10/0x10 ? __pfx___device_attach_driver+0x10/0x10 local_pci_probe+0x47/0xa0 pci_call_probe+0x5d/0x190 pci_device_probe+0xa7/0x160 really_probe+0xf9/0x370 ? pm_runtime_barrier+0x55/0xa0 __driver_probe_device+0x8c/0x140 driver_probe_device+0x24/0xd0 __device_attach_driver+0xcd/0x170 bus_for_each_drv+0x99/0x100 __device_attach+0xb4/0x1d0 device_attach+0x10/0x20 pci_bus_add_device+0x59/0x90 pci_bus_add_devices+0x31/0x80 pciehp_configure_device+0xaa/0x170 pciehp_enable_slot+0xd6/0x240 pciehp_handle_presence_or_link_change+0xf1/0x180 pciehp_ist+0x162/0x1c0 irq_thread_fn+0x24/0x70 irq_thread+0xef/0x1c0 ? __pfx_irq_thread_fn+0x10/0x10 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xfc/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x47/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 1fd4b3fe52ef ("wifi: rtw89: pci: support 36-bit PCI DMA address") Reported-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Closes: https://lore.kernel.org/linux-wireless/ccaf49b6-ff41-4917-90f1-f53cadaaa0da@gmail.com/T/#u Closes: https://github.com/openwrt/openwrt/issues/17025 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250506015356.7995-1-pkshih@realtek.com
2025-01-12wifi: rtw89: 8922ae: add variant info to support RTL8922AE-VSPing-Ke Shih
RTL8922AE-VS is a variant of RTL8922AE, which is supported by firmware version after 0.35.54.0 and only can support up to MCS11. Add a variant struct to describe these requirements accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250108020955.14668-3-pkshih@realtek.com
2025-01-12wifi: rtw89: pci: treat first receiving part as first segment for 8922AEPing-Ke Shih
For early chips, the RX BD info contains FS/LS bits for first/last segments of a receiving packet. For 8922AE, the FS bit should be ignored, or it may throw warning: rtw89_8922ae 0000:1a:00.0: skb should not be ready before first segment start To have compatible logic, FS determined by what pending skb is existing (!new) or not. Since we expect every single receiving packet in single one segment, enlarge 4 bytes for RX BD info, and add a debug message to note if RX buffer is possibly smaller than expected size. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250103025126.15378-1-pkshih@realtek.com
2025-01-07wifi: rtw89: pci: disable PCI completion timeout controlChin-Yen Lee
Realtek's chips follow suggestion of PCIe spec to design the max timeout of PCI completion, but some PCIe host reply too slow to meet it and lead PCI AER. Disable PCI completion timeout function via PCI configuration to avoid the AER. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241225122804.10214-1-pkshih@realtek.com
2024-11-18wifi: rtw89: pci: disable PCIE wake bit when PCIE deinitPing-Ke Shih
The PCIE wake bit is to control PCIE wake signal to host. When PCIE is going down, clear this bit to prevent waking up host unexpectedly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241111063835.15454-1-pkshih@realtek.com
2024-11-13Merge tag 'wireless-next-2024-11-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.13 Most likely the last -next pull request for v6.13. Most changes are in Realtek and Qualcomm drivers, otherwise not really anything noteworthy. Major changes: mac80211 * EHT 1024 aggregation size for transmissions ath12k * switch to using wiphy_lock() and remove ar->conf_mutex * firmware coredump collection support * add debugfs support for a multitude of statistics ath11k * dt: document WCN6855 hardware inputs ath9k * remove include/linux/ath9k_platform.h ath5k * Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support rtw88: * 8821au and 8812au USB adapters support rtw89 * thermal protection * firmware secure boot for WiFi 6 chip * tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits) Revert "wifi: iwlegacy: do not skip frames with bad FCS" wifi: mac80211: pass MBSSID config by reference wifi: mac80211: Support EHT 1024 aggregation size in TX net: rfkill: gpio: Add check for clk_enable() wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() wifi: Switch back to struct platform_driver::remove() wifi: ipw2x00: libipw_rx_any(): fix bad alignment wifi: brcmfmac: release 'root' node in all execution paths wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA wifi: iwlwifi: bump minimum API version in BZ/SC to 92 wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h wifi: iwlwifi: be less noisy if the NIC is dead in S3 wifi: iwlwifi: mvm: tell iwlmei when we finished suspending wifi: iwlwifi: allow fast resume on ax200 wifi: iwlwifi: mvm: support new initiator and responder command version wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency wifi: iwlwifi: mvm: MLO scan upon channel condition degradation wifi: iwlwifi: mvm: support new versions of the wowlan APIs wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif() ... ==================== Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc6). Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd") 188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links") https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/ net/mac80211/cfg.c c4382d5ca1af ("wifi: mac80211: update the right link for tx power") 8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx") drivers/net/ethernet/intel/ice/ice_ptp_hw.h 6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM") e4291b64e118 ("ice: Align E810T GPIO to other products") ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions") ac532f4f4251 ("ice: Cleanup unused declarations") https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-25wifi: rtw89: pci: add quirks by PCI subsystem ID for thermal protectionPing-Ke Shih
Specific PCI subsystem ID (SSID) of WiFi cards is used by specific customer who want to enable various features with different arguments. Define PCI SSID quirks tables to enable thermal protection with two kinds of thermal values for 110 and 120 degree Celsius. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241016133735.7571-3-pkshih@realtek.com
2024-10-20wifi: rtw89: pci: use 'int' as return type of error code in ↵Ping-Ke Shih
poll_{tx,rx}dma_ch_idle() The return type of error code of read_poll_timeout() and rtw89_pci_poll_{tx,rx}dma_ch_idle_ax() and must be 'int'. Correct them accordingly. Addresses-Coverity-ID: 1622341 ("Overflowed constant") Addresses-Coverity-ID: 1627296 ("Overflowed constant") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20241009004300.8144-3-pkshih@realtek.com
2024-10-17wifi: rtw89: pci: early chips only enable 36-bit DMA on specific PCI hostsPing-Ke Shih
The early chips including RTL8852A, RTL8851B, RTL8852B and RTL8852BT have interoperability problems of 36-bit DMA with some PCI hosts. Rollback to 32-bit DMA by default, and only enable 36-bit DMA for tested platforms. Since all Intel platforms we have can work correctly, add the vendor ID to white list. Otherwise, list vendor/device ID of bridge we have tested. Fixes: 1fd4b3fe52ef ("wifi: rtw89: pci: support 36-bit PCI DMA address") Reported-by: Marcel Weißenbach <mweissenbach@ignaz.org> Closes: https://lore.kernel.org/linux-wireless/20240918073237.Horde.VLueh0_KaiDw-9asEEcdM84@ignaz.org/T/#m07c5694df1acb173a42e1a0bab7ac22bd231a2b8 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Marcel Weißenbach <mweissenbach@ignaz.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240924021633.19861-1-pkshih@realtek.com
2024-10-01wifi: rtw89: 8852ce: set offset K of PCI PHY EQ to manual mode to improve ↵Ping-Ke Shih
compatibility Read calibration value of PCI RX offset, and set to manual mode as the value at PCI probe to prevent abnormal calibration results at runtime. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240925013901.9835-5-pkshih@realtek.com
2024-10-01wifi: rtw89: 8852ce: fix gray code conversion for filter out EQPing-Ke Shih
To use manual mode to set value of filter out EQ, read the source value of filter out EQ coded in gray code, and write to the target register in binary number. The function to convert from gray code to binary number is wrong originally, causing unexpected EQ, so fix it. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240925013901.9835-4-pkshih@realtek.com
2024-10-01wifi: rtw89: 8922ae: disable PCI PHY EQ to improve compatibilityPing-Ke Shih
For adaption EQ circuit, this HW design and affected by EIEOS (Electrical Idle Exit Order Set) amplitude from platform and process from IC, so disable EQ to improve that. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240925013901.9835-3-pkshih@realtek.com
2024-10-01wifi: rtw89: pci: consolidate PCI basic configurations for probe and resumePing-Ke Shih
The PCI settings aren't always persistent after chip suspends, so reconfigure the settings after chip resumes. Since most of these settings are the same, consolidate them into a function to avoid missing somewhere. Fix the missing case of 8922AE resume flow. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240925013901.9835-2-pkshih@realtek.com
2024-06-17wifi: rtw89: pci: fix RX tag race condition resulting in wrong RX lengthPing-Ke Shih
Read 32 bits RX info to a local variable to fix race condition between reading RX length and RX tag. Another solution is to get RX tag at first statement, but adopted solution can save some memory read, and also save 15 bytes binary code. RX tag, a sequence number, is used to ensure that RX data has been DMA to memory completely, so driver must check sequence number is expected before reading other data. This potential problem happens only after enabling 36-bit DMA. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240611021901.26394-2-pkshih@realtek.com
2024-06-17wifi: rtw89: pci: support 36-bit PCI DMA addressPing-Ke Shih
Modern platforms can install more than 4GB memory, so DMA address can larger than 32 bits. If a platform doesn't enable IOMMU, kernel needs extra works of swiotlb to help DMA that packets reside on memory over 4GB. The DMA addressing capability of Realtek WiFi chips is 36 bits, so set LSB 4 bits of high 32-bit address to register and TX/RX descriptor, which below figure shows 3-level pointers in TX direction, and RX direction is similar but 2-level pointers only. +--------+ | | register to head of TX BD +---|----+ | +---------+ +-----> | TX BD | (in memory) +----|----+ | +---------+ +------> | TX WD | (in memory) +----|----+ | +--------+ +------> | skb | +--------+ Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240611021901.26394-1-pkshih@realtek.com
2024-06-17wifi: rtw89: 885xbx: apply common settings to 8851B, 8852B and 8852BTPing-Ke Shih
Many common settings can share to 8851B, 8852B and 8852BT, so add an inline function rtw89_is_rtl885xb() to be concise. Meanwhile review and align settings for existing chips. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240607070659.80263-4-pkshih@realtek.com
2024-06-10Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-27wifi: rtw89: 8852c: correct logic and restore PCI PHY EQ after device resumePing-Ke Shih
PCI PHY EQ value is missing after card off/on, so update the value after device resume. The original commit only updates once at probe stage, which could lead problem after suspend/resume. The logic should be read a value from one register and write to another register with a mask to avoid affecting unrelated bits. Fixes: a78d33a1286c ("wifi: rtw89: 8852c: disable PCI PHY EQ to improve compatibility") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240521040139.20311-1-pkshih@realtek.com
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-05-16wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACYDamien Le Moal
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-21-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-05-09wifi: rtw89: Un-embed dummy deviceBreno Leitao
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from the private struct by converting it into a pointer. Then use the leverage the new alloc_netdev_dummy() helper to allocate and initialize dummy devices. [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ Tested with RTL8852BE, RTL8852C and RTL8922AE. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240424182351.3936556-1-leitao@debian.org
2024-04-18wifi: rtw89: pci: correct TX resource checking for PCI DMA channel of ↵Ping-Ke Shih
firmware command The DMA channel of firmware command doesn't use TX WD (WiFi descriptor), so don't need to consider number of TX WD as factor of TX resource. Otherwise, during pause state (a transient state to switch to/from low power mode) firmware commands could be dropped and driver throws warnings suddenly: rtw89_8852ce 0000:04:00.0: no tx fwcmd resource rtw89_8852ce 0000:04:00.0: failed to send h2c The case we met is that driver sends RSSI strength of firmware command at RX path that could be running concurrently with switching low power mode. The missing of this firmware command doesn't affect user experiences, because the RSSI strength will be updated again after a while. The DMA descriptors of normal packets has three layers like: +-------+ | TX BD | (*n elements) +-------+ | | +-------+ +-> | TX WD | (*m elements) +-------+ | | +--------+ +-> | SKB | +--------+ And, firmware command queue (TXCH 12) is a special queue that has only two layers: +-------+ | TX BD | (*n elements) +-------+ | | +------------------+ +-> | firmware command | +------------------+ Fixes: 4a29213cd775 ("wifi: rtw89: pci: correct TX resource checking in low power mode") Cc: stable@vger.kernel.org Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240410011316.9906-1-pkshih@realtek.com
2024-04-03wifi: rtw89: 8852c: disable PCI PHY EQ to improve compatibilityPing-Ke Shih
For adaption EQ circuit, this HW design and affected by EIEOS (Electrical Idle Exit Order Set) amplitude from platform and process from IC, so disable EQ to improve that. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240329015251.22762-5-pkshih@realtek.com
2024-04-03wifi: rtw89: 8852c: add quirk to set PCI BER for certain platformsPing-Ke Shih
Increase PCI BER (bit error rate) count depth setting which could increase PHY circuit fault tolerance and improve compatibility. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240329015251.22762-4-pkshih@realtek.com
2024-03-05wifi: rtw89: update DMA function with different generationChin-Yen Lee
The register of control and polling function for TX/RX DMA is different from different generation, so update them. Also rename polling_dma function to polling_dma_idle to avoid misunderstanding. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-4-pkshih@realtek.com
2024-02-27wifi: rtw89: pci: implement PCI CLK/ASPM/L1SS for WiFi 7 chipsChin-Yen Lee
PCI CLK/ASPM/L1SS is power management mechanism used to reduce power consumption of PCI chip. The registers for setting of these features in WiFi 7 Chip are different from WiFi 6 chip, so separate them in generation information. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240222064258.59782-4-pkshih@realtek.com
2024-02-06wifi: rtw89: fw: read firmware secure information from efusePing-Ke Shih
To support firmware secure boot, read secure information from efuse to know if current hardware module can support secure boot with certain cryptography method. This information should be prepared before downloading firmware, so read efuse right after power on at probe stage. The secure information includes secure cryptography method and secure key index that are used to choose proper key material when downloading firmware. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240204012627.9647-3-pkshih@realtek.com
2024-02-01wifi: rtw89: pci: validate RX tag for RXQ and RPQPing-Ke Shih
PCI RX ring is a kind of read/write index ring, and DMA and ring index are asynchronous, so suddenly driver gets newer index ahead before DMA. To resolve this rare situation, we use a RX tag as helpers to make sure DMA is done. The RX tag is a 13-bit value, and range is from 1 ~ 0x1FFF, but 0 isn't used so should be skipped. Only enable this validation to coming WiFi 7 chips, because existing chips use different design and don't really meet this situation. Add missed rx_ring_eq_is_full for 8851BE by the way. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240121071826.10159-4-pkshih@realtek.com
2024-02-01wifi: rtw89: pci: interrupt v2 refine IMR for SERZong-Zhe Yang
During SER (system error recovery), expect to deal with only ISR related to halt. So, refine IMR configuration. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240121071826.10159-3-pkshih@realtek.com
2024-01-10wifi: rtw89: pci: use DBI function for 8852AE/8852BE/8851BEChin-Yen Lee
Sometimes driver can't use kernel API pci_read/write_config_byte to access the PCI config space of above address 0x100 due to the negotiated PCI setting. 8852AE/8852BE/8851BE provide another way called DBI function, which belongs to WiFi mac and could access all PCI config space for this case. Link: https://lore.kernel.org/linux-wireless/79fe81b7db7148b9a7da2353c16d70fb@realtek.com/T/#t Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103012346.6822-1-pkshih@realtek.com
2023-12-07wifi: rtw89: 8922a: dump MAC registers when SER occursChia-Yuan Li
To diagnose the reason why firmware or hardware get abnormal, add to dump MAC registers related to counters and interrupt masks. With these values, people can classify problems and check if registers values are unexpected, and then correct them. However, it could possible false alarm because firmware triggers this SER event by wrong conditions that we should correct it at firmware or register settings. In field, SER might happen under special conditions, and very hard to happen again, so dump lots of registers to provide rich information to catch the problem. Signed-off-by: Chia-Yuan Li <leo.li@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231204080751.15354-5-pkshih@realtek.com
2023-11-14wifi: rtw89: pci: update interrupt mitigation register for 8922AEPing-Ke Shih
To reduce interrupts, configure the mitigation setting of 8922AE when bringing interface up, and then check situations to decide turning on or off the function. With this, interrupt count decreases to 20,141 from 202,141 in period of 20 seconds. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231110012319.12727-8-pkshih@realtek.com
2023-11-14wifi: rtw89: pci: correct interrupt mitigation register for 8852CEPing-Ke Shih
To reduce interrupt count, configure mitigation register with thresholds of time and packet count. We missed that 8852CE uses different register address, so correct it. Then, interrupt counts down to 30,763 from 229,825 during stress test in 20 seconds. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231110012319.12727-7-pkshih@realtek.com
2023-11-14wifi: rtw89: 8922ae: add v2 interrupt handlers for 8922AEPing-Ke Shih
The handlers include three parts -- 1) configure interrupt mask; 2) enable/disable interrupt; 3) recognize (read) interrupt status. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231110012319.12727-6-pkshih@realtek.com
2023-11-14wifi: rtw89: pci: generalize interrupt status bits of interrupt handlersPing-Ke Shih
For WiFi 7, interrupt status registers and their definitions are changed a lot, but the logic is still the same, so define fields to reuse the code. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231110012319.12727-5-pkshih@realtek.com
2023-11-14wifi: rtw89: pci: add pre_deinit to be called after probe completePing-Ke Shih
At probe stage, we only do partial initialization to enable ability to download firmware and read capabilities. After that, we use this pre_deinit to disable HCI to save power. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231110012319.12727-4-pkshih@realtek.com
2023-11-14wifi: rtw89: pci: stop/start DMA for level 1 recovery according to chip genZong-Zhe Yang
Level 1 recovery is to recover TX/RX rings, so it needs PCI to stop/start DMA. But, different chip gen have different implementations, either register address/mask or function flow. So, configure callback of stop/start DMA by chip gen. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231110012319.12727-3-pkshih@realtek.com
2023-11-14wifi: rtw89: pci: reset BDRAM according to chip genZong-Zhe Yang
Configure callback of reset BDRAM (buffer descriptor RAM) by chip gen. Refine the one of 802.11ax chip gen and drop a redundant duplicate of it in 802.11ax chip gen. Then, assign right callback of rst_bdram for HCI ops which needs to do callback according to chip gen. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231110012319.12727-2-pkshih@realtek.com
2023-11-08wifi: rtw89: pci: implement PCI mac_pre_init for WiFi 7 chipsPing-Ke Shih
Call this function when doing MAC initialization at probe stage. It does partial initial registers only, because we only need basic ability to download firmware. The function to clear index is the sub-function, so set its pointer as well. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231101072149.21997-4-pkshih@realtek.com
2023-11-08wifi: rtw89: pci: use gen_def pointer to configure mac_{pre,post}_init and ↵Ping-Ke Shih
clear PCI ring index Use gen_def pointer to call three WiFi 6 specific functions, and add _ax suffix to them. Then, we will implement functions for WiFi 7 chips later. The mac_{pre,post}_init are used to initialize PCI during doing MAC initialization, and clear PCI ring index to make index consistent between driver, firmware and hardware. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231101072149.21997-3-pkshih@realtek.com
2023-11-08wifi: rtw89: pci: add PCI generation information to pci_info for each chipPing-Ke Shih
In order to reuse PCI initial and configuration flows, add struct rtw89_pci_gen_def to abstract the differences between WiFi 6/7 generations. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231101072149.21997-2-pkshih@realtek.com
2023-10-30wifi: rtw89: pci: generalize code of PCI control DMA IO for WiFi 7Ping-Ke Shih
The register to enable/disable PCI DMA IO has many variants, so define and use a field to control it accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231026120049.9187-5-pkshih@realtek.com
2023-10-30wifi: rtw89: pci: add new RX ring design to determine full RX ring efficientlyPing-Ke Shih
To make hardware efficient to determine if RX ring is full, introduce new design that checks if reading and writing indices are equal. Comparing to old design, initial indices of both reading and writing indices are 0 that means empty, and hardware checks full by "writing index + 1 == reading index". The "+1" has extra cost for hardware, so new design is to avoid this. Take ring size is 256 as an example, the initial reading and writing indices are 255 and 0 respectively; the initial values mean empty. If two indices are the same, for example 5 and 5, it means ring is full. wp rp used_cnt state 255 0 0 initial (ring is empty) 255 1 1 receive 1st packet 255 2 2 receive 2nd packet 0 2 1 driver read 1st packet 1 2 0 driver read 2nd packet (ring is empty) : 5 5 255 ring is full Note: 'rp' is hardware writing index Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231026120049.9187-4-pkshih@realtek.com
2023-10-30wifi: rtw89: pci: define PCI ring address for WiFi 7 chipsPing-Ke Shih
PCI rings are used to DMA TX/RX packets. The address of WiFi 7 chips are different from previous ones, so add them according to hardware design. Another difference is that driver doesn't need to configure BD (buffer descriptor) RAM table, which is used by hardware to fetch BD ahead before fetching whole TX data. A TX ring contains numbers of TX BD (e.g. 512): TX BD (buffer descriptor; continual memory) +---+---+---+---+ +---+ | | | | | ... | | +-|-+---+---+---+ +---+ | | point to TX WD (WiFi descriptor; metadata of a skb data) v +------+ | | | | +-|----+ | | point to a skb data v +------+ | | | | +------+ Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231026120049.9187-3-pkshih@realtek.com
2023-09-18wifi: rtw89: add chip_info::txwd_info size to generalize TX WD submitPing-Ke Shih
For existing chips, size of TX WD info is 6 words, but upcoming WiFi 7 chips become 8 words, so add a chip_info to reuse the code. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230911082049.33541-5-pkshih@realtek.com
2023-08-25Fix nomenclature for USB and PCI wireless devicesAlan Stern
A mouse that uses a USB connection is called a "USB mouse" device (or "USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi adapter that connects to the host computer via USB is a "USB wireless" device, not a "wireless USB" device. (The latter term more properly refers to a defunct Wireless USB specification, which described a technology for sending USB protocol messages over an ultra wideband radio link.) Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a "PCIe wireless" device, not a "wireless PCIe" device. Rephrase the text in the kernel source where the word ordering is wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu
2023-05-25wifi: rtw89: add chip_ops::query_rxdesc() and rxd_len as helpers to support ↵Ping-Ke Shih
newer chips The next generation chips use different RX descriptor format, so add a chip_ops to hook suitable handlers. Also, the length of RX descriptor is different, so add a variable to store the length according to chip and descriptor content dynamically. Then, the code can be more general. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230522122513.13559-2-pkshih@realtek.com
2023-05-11wifi: rtw89: pci: fix interrupt enable mask for HALT C2H of RTL8851BZong-Zhe Yang
RTL8851B keeps almost the same interrupt flow as RTL8852A and RTL8852B. But, it uses a different bitmask for interrupt indicator of FW HALT C2H. So, we make a chip judgement in pci when configuring interrupt mask. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230508084335.42953-2-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-07-25 18:24:17 +0000