summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ti
AgeCommit message (Collapse)Author
17 hoursMerge tag 'net-next-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
7 dayswifi: Fix typosBjorn Helgaas
Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250723201741.2908456-1-helgaas@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: cfg80211/mac80211: Add support to get radio indexRoopni Devanathan
Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: wlcore: Remove unused wl12xx_cmd_start_fwlogDr. David Alan Gilbert
wl12xx_cmd_start_fwlog() was added in 2011 by commit 95dac04f8813 ("wl12xx: Support routing FW logs to the host") but has remained unused. Remove it. (I can see the 'stop' is used, and the 'config' is used, so I assume the 'start' isn't normally needed). Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250622232638.166283-1-linux@treblig.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wl1251: Remove unused wl1251_cmd_*Dr. David Alan Gilbert
wl1251_cmd_read_memory() and wl1251_cmd_test() last use was removed in 2009 by commit f298c282a523 ("wl1251: remove accidentally added wl1251_netlink.c") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250622172804.116396-3-linux@treblig.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wl1251: Remove unused wl1251_acx_rate_policiesDr. David Alan Gilbert
wl1251_acx_rate_policies() was added in 2009 by commit 0e71bb084adc ("wl1251: remove wl1251_ops") but hasn't been used. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250622172804.116396-2-linux@treblig.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-17sysfs: treewide: switch back to bin_attribute::read()/write()Thomas Weißschuh
The bin_attribute argument of bin_attribute::read() is now const. This makes the _new() callbacks unnecessary. Switch all users back. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-04-11Merge tag 'wireless-2025-04-11' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Just a handful of fixes, notably - iwlwifi: various build warning fixes (e.g. PM_SLEEP) - iwlwifi: fix operation when FW reset handshake times out - mac80211: drop pending frames on interface down * tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()" wifi: iwlwifi: mld: Restart firmware on iwl_mld_no_wowlan_resume() error wifi: iwlwifi: pcie: set state to no-FW before reset handshake wifi: wl1251: fix memory leak in wl1251_tx_work wifi: brcmfmac: fix memory leak in brcmf_get_module_param wifi: iwlwifi: mld: silence uninitialized variable warning wifi: mac80211: Purge vif txq in ieee80211_do_stop() wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue() wifi: at76c50x: fix use after free access in at76_disconnect wifi: add wireless list to MAINTAINERS iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled wifi: iwlwifi: mld: fix PM_SLEEP -Wundef warning wifi: iwlwifi: mld: reduce scope for uninitialized variable ==================== Link: https://patch.msgid.link/20250411142354.24419-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-04-02wifi: wl1251: fix memory leak in wl1251_tx_workAbdun Nihaal
The skb dequeued from tx_queue is lost when wl1251_ps_elp_wakeup fails with a -ETIMEDOUT error. Fix that by queueing the skb back to tx_queue. Fixes: c5483b719363 ("wl12xx: check if elp wakeup failed") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Michael Nemanov <michael.nemanov@ti.com> Link: https://patch.msgid.link/20250330104532.44935-1-abdun.nihaal@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-10wifi: wlcore: fix unbalanced pm_runtime callsAndreas Kemnade
If firmware boot failes, runtime pm is put too often: [12092.708099] wlcore: ERROR firmware boot failed despite 3 retries [12092.708099] wl18xx_driver wl18xx.1.auto: Runtime PM usage count underflow! Fix that by redirecting all error gotos before runtime_get so that runtime is not put. Fixes: c40aad28a3cf ("wlcore: Make sure firmware is initialized in wl1271_op_add_interface()") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Michael Nemanov <michael.nemanov@ti.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250104195507.402673-1-akemnade@kernel.org
2024-12-18wifi: wlcore: sysfs: constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-3-ec460b91f274@weissschuh.net
2024-12-09wifi: wlcore: testmode: Constify strutc nla_policyChristophe JAILLET
'struct nla_policy' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security, especially when the structure holds some function pointers. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 5062 528 0 5590 15d6 drivers/net/wireless/ti/wlcore/testmode.o After: ===== text data bss dec hex filename 5178 404 0 5582 15ce drivers/net/wireless/ti/wlcore/testmode.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/78810e3ebb74ddbd3a4538f182bf1143b89baba7.1731332414.git.christophe.jaillet@wanadoo.fr
2024-11-11wifi: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/wireless to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. En passant several whitespace changes are done to make indentation consistent in the struct initializers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241106170706.38922-2-u.kleine-koenig@baylibre.com
2024-10-23wifi: mac80211: call rate_control_rate_update() for link STAJohannes Berg
In order to update the right link information, call the update rate_control_rate_update() with the right link_sta, and then pass that through to the driver's sta_rc_update() method. The software rate control still doesn't support it, but that'll be skipped by not having a rate control ref. Since it now operates on a link sta, rename the driver method. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-18wifi: wl1251: Use IRQF_NO_AUTOEN flag in request_irq()Jinjie Ruan
As commit cbe16f35bee6 ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()") said, the code below is subobtimal. IRQF_NO_AUTOEN flag can be used by drivers to request_irq(). It prevents the automatic enabling of the requested interrupt in the same safe way. With that the usage can be simplified and corrected. irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240910124314.698896-4-ruanjinjie@huawei.com
2024-09-18wifi: wlcore: sdio: Use helper to define resourcesVasileios Amoiridis
Resources definition can become simpler and more organised by using the dedicated helpers. Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Tested-by: Sabeeh Khan <sabeeh-khan@ti.com> Reviewed-by: Sabeeh Khan <sabeeh-khan@ti.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240904154919.118513-4-vassilisamir@gmail.com
2024-09-18wifi: wlcore: sdio: Make use of irq_get_trigger_type()Vasileios Amoiridis
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more simple irq_get_trigger_type(irq). Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Reviewed-by: Sabeeh Khan <sabeeh-khan@ti.com> Tested-by: Sabeeh Khan <sabeeh-khan@ti.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240904154919.118513-3-vassilisamir@gmail.com
2024-09-06wifi: mac80211: handle ieee80211_radar_detected() for MLOAditya Kumar Singh
Currently DFS works under assumption there could be only one channel context in the hardware. Hence, drivers just calls the function ieee80211_radar_detected() passing the hardware structure. However, with MLO, this obviously will not work since number of channel contexts will be more than one and hence drivers would need to pass the channel information as well on which the radar is detected. Also, when radar is detected in one of the links, other link's CAC should not be cancelled. Hence, in order to support DFS with MLO, do the following changes - * Add channel context conf pointer as an argument to the function ieee80211_radar_detected(). During MLO, drivers would have to pass on which channel context conf radar is detected. Otherwise, drivers could just pass NULL. * ieee80211_radar_detected() will iterate over all channel contexts present and * if channel context conf is passed, only mark that as radar detected * if NULL is passed, then mark all channel contexts as radar detected * Then as usual, schedule the radar detected work. * In the worker, go over all the contexts again and for all such context which is marked with radar detected, cancel the ongoing CAC by calling ieee80211_dfs_cac_cancel() and then notify cfg80211 via cfg80211_radar_event(). * To cancel the CAC, pass the channel context as well where radar is detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is canceled only on the links using the provided context, leaving other links unaffected. This would also help in scenarios where there is split phy 5 GHz radio, which is capable of DFS channels in both lower and upper band. In this case, simultaneous radars can be detected. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-21Merge tag 'mm-nonmm-stable-2024-07-21-15-07' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - In the series "treewide: Refactor heap related implementation", Kuan-Wei Chiu has significantly reworked the min_heap library code and has taught bcachefs to use the new more generic implementation. - Yury Norov's series "Cleanup cpumask.h inclusion in core headers" reworks the cpumask and nodemask headers to make things generally more rational. - Kuan-Wei Chiu has sent along some maintenance work against our sorting library code in the series "lib/sort: Optimizations and cleanups". - More library maintainance work from Christophe Jaillet in the series "Remove usage of the deprecated ida_simple_xx() API". - Ryusuke Konishi continues with the nilfs2 fixes and clanups in the series "nilfs2: eliminate the call to inode_attach_wb()". - Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix GDB command error". - Plus the usual shower of singleton patches all over the place. Please see the relevant changelogs for details. * tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits) ia64: scrub ia64 from poison.h watchdog/perf: properly initialize the turbo mode timestamp and rearm counter tsacct: replace strncpy() with strscpy() lib/bch.c: use swap() to improve code test_bpf: convert comma to semicolon init/modpost: conditionally check section mismatch to __meminit* init: remove unused __MEMINIT* macros nilfs2: Constify struct kobj_type nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro math: rational: add missing MODULE_DESCRIPTION() macro lib/zlib: add missing MODULE_DESCRIPTION() macro fs: ufs: add MODULE_DESCRIPTION() lib/rbtree.c: fix the example typo ocfs2: add bounds checking to ocfs2_check_dir_entry() fs: add kernel-doc comments to ocfs2_prepare_orphan_dir() coredump: simplify zap_process() selftests/fpu: add missing MODULE_DESCRIPTION() macro compiler.h: simplify data_race() macro build-id: require program headers to be right after ELF header resource: add missing MODULE_DESCRIPTION() ...
2024-06-28kernel-wide: fix spelling mistakes like "assocative" -> "associative"Jesse Brandeburg
There were several instances of the string "assocat" in the kernel, which should have been spelled "associat", with the various endings of -ive, -ed, -ion, and sometimes beginnging with dis-. Add to the spelling dictionary the corrections so that future instances will be caught by checkpatch, and fix the instances found. Originally noticed by accident with a 'git grep socat'. Link: https://lkml.kernel.org/r/20240612001247.356867-1-jesse.brandeburg@intel.com Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-27Merge tag 'wireless-next-2024-06-27' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Highlights this time are: - cfg80211/nl80211: * improvements for 6 GHz regulatory flexibility - mac80211: * use generic netdev stats * multi-link improvements/fixes - brcmfmac: * MFP support (to enable WPA3) - wilc1000: * suspend/resume improvements - iwlwifi: * remove support for older FW for new devices * fast resume (keeping the device configured) - wl18xx: * support newer firmware versions * tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (100 commits) wifi: brcmfmac: of: Support interrupts-extended wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3 net: rfkill: Correct return value in invalid parameter case wifi: mac80211: fix NULL dereference at band check in starting tx ba session wifi: iwlwifi: mvm: fix rs.h kernel-doc wifi: iwlwifi: fw: api: datapath: fix kernel-doc wifi: iwlwifi: fix remaining mistagged kernel-doc comments wifi: iwlwifi: fix prototype mismatch kernel-doc warnings wifi: iwlwifi: fix kernel-doc in iwl-fh.h wifi: iwlwifi: fix kernel-doc in iwl-trans.h wifi: iwlwifi: pcie: fix kernel-doc wifi: iwlwifi: dvm: fix kernel-doc warnings wifi: iwlwifi: mvm: don't log error for failed UATS table read wifi: iwlwifi: trans: make bad state warnings wifi: iwlwifi: fw: api: fix some kernel-doc wifi: iwlwifi: mvm: remove init_dbg module parameter wifi: iwlwifi: update the BA notification API wifi: iwlwifi: mvm: always unblock EMLSR on ROC end wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check wifi: iwlwifi: mvm: don't flush BSSes on restart with MLD API ... ==================== Link: https://patch.msgid.link/20240627114135.28507-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-18wifi: wl18xx: allow firmwares > 8.9.0.x.58Russell King (Oracle)
wlcore firmware versions are structured thusly: chip.if-type.major.sub-type.minor e.g. 8 9 0 0 58 With WL18xx ignoring the major firmware version, looking for a firmware version that conforms to: chip >= 8 if-type >= 9 major (don't care) sub-type (don't care) minor >= 58 Each test is satisfied if the value read from the firmware is greater than the minimum, but if it is equal (or we don't care about the field), then the next field is checked. Thus it doesn't recognise 8.9.1.x.0 as being newer than 8.9.0.x.58 since the major and sub-type numbers are "don't care" and the minor needs to be greater or equal to 58. We need to change the major version from "ignore" to "0" for this later firmware to be correctly detected, and allow the dual-firmware version support to work. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsyH-00E8w6-Vu@rmk-PC.armlinux.org.uk
2024-06-18wifi: wl18xx: add support for reading 8.9.1 fw statusRussell King (Oracle)
Add the necessary code to read the 8.9.1 firmware status into the driver private status structure, augmenting the 8.9.0 firmware status code. New structure layout taken from: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsyC-00E8w0-Rz@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: add pn16 supportRussell King (Oracle)
TI Wl18xx firmware adds a "pn16" field for AES and TKIP keys as per their patch: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 Add support for this, but rather than requiring the field to be present (which would break existing firmwares), make it optional. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsy7-00E8vu-Nc@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: store AP encryption key typeRussell King (Oracle)
Updates for WL18xx firmware 8.9.1.x.x need to know the AP encryption key type. Store this when a new key is set. Patch extracted from: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsy2-00E8vo-KK@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: pass "status" to wlcore_hw_convert_fw_status()Russell King (Oracle)
wlcore_fw_status() is passed a pointer to the struct wl_fw_status to decode the status into, which is always wl->fw_status. Rather than referencing wl->fw_status within wlcore_fw_status(), use the supplied argument so that we access this member in a consistent manner. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsxx-00E8vi-Gf@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: improve code in wlcore_fw_status()Russell King (Oracle)
Referring to status->counters.tx_lnk_free_pkts[i] multiple times leads to less efficient code. Cache this value in a local variable. This also makes the code clearer. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsxs-00E8vc-DD@rmk-PC.armlinux.org.uk
2024-06-18wifi: wl18xx: make wl18xx_tx_immediate_complete() more efficientRussell King (Oracle)
wl18xx_tx_immediate_complete() iterates through the completed transmit descriptors in a circular fashion, and in doing so uses a modulus operation that is not a power of two. This leads to inefficient code generation, which can be easily solved by providing a helper to increment to the next descriptor. Use this more efficient solution. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsxn-00E8vW-9h@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: correctness fix fwlog readingRussell King (Oracle)
Fix the calculation of clear_offset, which may overflow the end of the buffer. However, this is harmless if it does because in that case it will be recalculated when we copy the chunk of messages at the start of the buffer. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsxi-00E8vQ-5r@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: fix wlcore AP modeRussell King (Oracle)
Using wl183x devices in AP mode with various firmwares is not stable. The driver currently adds a station to firmware with basic rates when it is first known to the stack using the CMD_ADD_PEER command. Once the station has finished authorising, another CMD_ADD_PEER command is issued to update the firmware with the rates the station can use. However, after a random amount of time, the firmware ignores the power management nullfunc frames from the station, and tries to send packets while the station is asleep, resulting in lots of retries dropping down in rate due to no response. This restricts the available bandwidth. With this happening with several stations, the user visible effect is the latency of interactive connections increases significantly, packets get dropped, and in general the WiFi connections become unreliable and unstable. Eventually, the firmware transmit queue appears to get stuck - with packets and blocks allocated that never clear. TI have a couple of patches that address this, but they touch the mac80211 core to disable NL80211_FEATURE_FULL_AP_CLIENT_STATE for *all* wireless drivers, which has the effect of not adding the station to the stack until later when the rates are known. This is a sledge hammer approach to solving the problem. The solution implemented here has the same effect, but without impacting all drivers. We delay adding the station to firmware until it has been authorised in the driver, and correspondingly remove the station when unwinding from authorised state. Adding the station to firmware allocates a hlid, which will now happen later than the driver expects. Therefore, we need to track when this happens so that we transmit using the correct hlid. This patch is an equivalent fix to these two patches in TI's wilink8-wlan repository: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0004-mac80211-patch.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0005-wlcore-patch.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Co-developed-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sClp4-00Evu7-8v@rmk-PC.armlinux.org.uk
2024-04-05wifi: wl1251: simplify module initializationKrzysztof Kozlowski
This driver's initialization functions do not perform any custom code, except printing messages. Printing messages on modules loading/unloading is discouraged because it pollutes the dmesg regardless whether user actually has this device. Core kernel code already gives tools to investigate whether module was loaded or not. Drop the printing messages which allows to replace open-coded module_sdio_driver(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240329171019.63836-4-krzysztof.kozlowski@linaro.org
2024-03-28wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting ready to enable it globally. Remove unused flexible-array members in multiple structures, and fix a hundred -Wflex-array-member-not-at-end warnings[1] in drivers/wireless/ti/ Link: https://gist.github.com/GustavoARSilva/fbf63c114d01319bbd19baf95b4d704b [1] Link: https://github.com/KSPP/linux/issues/202 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/ZgDcwIgxkhs6ZVdY@neat
2024-03-21wifi: ti: Convert sprintf/snprintf to sysfs_emitLi Zhijian
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). sprintf() will be converted as weel if they have. Generally, this patch is generated by make coccicheck M=<path/to/file> MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended CC: Kalle Valo <kvalo@kernel.org> CC: linux-wireless@vger.kernel.org Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240315055211.1347548-3-lizhijian@fujitsu.com
2024-03-05wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warnsJavier Martinez Canillas
When these failures happen, the warning and call trace is printed which is excessive. Instead, just print the error but rate limited to prevent warns to unnecessarily pollute the kernel log buffer and make the serial console practically unusable. For example, on an AM625 BeaglePlay board where accessing a SDIO WiFi chip fails with an -110 (ETIMEDOUT) error: $ dmesg | grep "sdio write\|read failed (-110)" | wc -l 39 Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240228101042.728881-1-javierm@redhat.com
2024-02-08wifi: mac80211: add support to call csa_finish on a linkAditya Kumar Singh
Currently ieee80211_csa_finish() function finalizes CSA by scheduling a finalizing worker using the deflink. With MLO, there is a need to do it on a given link basis. Pass link ID of the link on which CSA needs to be finalized. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240130140918.1172387-6-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: introduce 'channel request'Johannes Berg
For channel contexts, mac80211 currently uses the cfg80211 chandef struct (control channel, center freq(s), width) to define towards drivers and internally how these behave. In fact, there are _two_ such structs used, where the min_def can reduce bandwidth according to the stations connected. Unfortunately, with EHT this is longer be sufficient, at least not for all hardware. EHT requires that non-AP STAs that are connected to an AP with a lower bandwidth than it (the AP) advertises (e.g. 160 MHz STA connected to 320 MHz AP) still be able to receive downlink OFDMA and respond to trigger frames for uplink OFDMA that specify the position and bandwidth for the non-AP STA relative to the channel the AP is using. Therefore, they need to be aware of this, and at least for some hardware (e.g. Intel) this awareness is in the hardware. As a result, use of the "same" channel may need to be split over two channel contexts where they differ by the AP being used. As a first step, introduce a concept of a channel request ('chanreq') for each interface, to control the context it requests. This step does nothing but reorganise the code, so that later the AP's chandef can be added to the request in order to handle the EHT case described above. Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: simplify non-chanctx driversJohannes Berg
There are still surprisingly many non-chanctx drivers, but in mac80211 that code is a bit awkward. Simplify this by having those drivers assign 'emulated' ops, so that the mac80211 code can be more unified between non-chanctx/chanctx drivers. This cuts the number of places caring about it by about 15, which are scattered across - now they're fewer and no longer in the channel context handling. Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08Merge wireless into wireless-nextJohannes Berg
There are some changes coming to wireless-next that will otherwise cause conflicts, pull wireless in first to be able to resolve that when applying the individual changes rather than having to do merge resolution later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-05wifi: ti: wlcore: sdio: Drop unused includeLinus Walleij
The file is including the legacy GPIO header <linux/gpio.h> but is not using any symbols from it, drop the header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240131-descriptors-wireless-v1-2-e1c7c5d68746@linaro.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wl18xxBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI WiLink 8 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-8-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wl1251 and wl12xxBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI wireless drivers wl12xx and wl1251. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-3-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wlcoreBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI WLAN wlcore drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-2-leitao@debian.org
2023-10-23wifi: wlcore: main: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect fw_version strings to be NUL-terminated based on other similar assignments: wireless/broadcom/brcm80211/brcmsmac/main.c 7867: snprintf(wlc->wiphy->fw_version, 7868: sizeof(wlc->wiphy->fw_version), "%u.%u", rev, patch); wireless/broadcom/b43legacy/main.c 1765: snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u", wireless/broadcom/b43/main.c 2730: snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u", wireless/intel/iwlwifi/dvm/main.c 1465: snprintf(priv->hw->wiphy->fw_version, 1466: sizeof(priv->hw->wiphy->fw_version), wireless/intel/ipw2x00/ipw2100.c 5905: snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s", Based on this, NUL-padding is not required. A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231018-strncpy-drivers-net-wireless-ti-wlcore-main-c-v1-1-1b1055f482a1@google.com
2023-10-23wifi: wlcore: boot: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect wl->chip.fw_ver_str to be NUL-terminated based on its usage with DRIVER_STATE_PRINT_STR() in debugfs.c: 491 | DRIVER_STATE_PRINT_STR(chip.fw_ver_str); ... which uses DRIVER_STATE_PRINT(): 444 | #define DRIVER_STATE_PRINT_STR(x) DRIVER_STATE_PRINT(x, "%s") ... which relies on scnprintf: 434 | #define DRIVER_STATE_PRINT(x, fmt) \ 435 | (res += scnprintf(buf + res, DRIVER_STATE_BUF_LEN - res,\ 436 | #x " = " fmt "\n", wl->x)) Moreover, NUL-padding is not required. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Similar-to: https://lore.kernel.org/all/20231018-strncpy-drivers-net-wireless-ti-wl18xx-main-c-v2-1-ab828a491ce5@google.com/ Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231018-strncpy-drivers-net-wireless-ti-wlcore-boot-c-v1-1-d3c6cc6b80fe@google.com
2023-10-23wifi: wl18xx: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. wl->chip.phy_fw_ver_str is obviously intended to be NUL-terminated by the deliberate comment telling us as much. Furthermore, its only use is drivers/net/wireless/ti/wlcore/debugfs.c shows us it should be NUL-terminated since its used in scnprintf: 492 | DRIVER_STATE_PRINT_STR(chip.phy_fw_ver_str); which is defined as: | #define DRIVER_STATE_PRINT_STR(x) DRIVER_STATE_PRINT(x, "%s") ... | #define DRIVER_STATE_PRINT(x, fmt) \ | (res += scnprintf(buf + res, DRIVER_STATE_BUF_LEN - res,\ | #x " = " fmt "\n", wl->x)) We can also see that NUL-padding is not required. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. The very fact that a plain-english comment had to be made alongside a manual NUL-byte assignment for such a simple purpose shows why strncpy is faulty. It has non-obvious behavior that has to be clarified every time it is used (and if it isn't then the reader suffers). Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231018-strncpy-drivers-net-wireless-ti-wl18xx-main-c-v2-1-ab828a491ce5@google.com
2023-10-23wifi: wl1251: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. Based on other assignments of similar fw_version fields we can see that NUL-termination is required but not NUL-padding: ethernet/intel/ixgbe/ixgbe_ethtool.c 1111: strscpy(drvinfo->fw_version, adapter->eeprom_id, 1112: sizeof(drvinfo->fw_version)); ethernet/intel/igc/igc_ethtool.c 147: scnprintf(adapter->fw_version, 148: sizeof(adapter->fw_version), 153: strscpy(drvinfo->fw_version, adapter->fw_version, 154: sizeof(drvinfo->fw_version)); wireless/broadcom/brcm80211/brcmfmac/core.c 569: strscpy(info->fw_version, drvr->fwver, sizeof(info->fw_version)); wireless/broadcom/brcm80211/brcmsmac/main.c 7867: snprintf(wlc->wiphy->fw_version, 7868: sizeof(wlc->wiphy->fw_version), "%u.%u", rev, patch); wireless/broadcom/b43legacy/main.c 1765: snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u", wireless/broadcom/b43/main.c 2730: snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u", wireless/intel/iwlwifi/dvm/main.c 1465: snprintf(priv->hw->wiphy->fw_version, 1466: sizeof(priv->hw->wiphy->fw_version), wireless/intel/ipw2x00/ipw2100.c 5905: snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s", A suitable replacement is `strscpy` due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231018-strncpy-drivers-net-wireless-ti-wl1251-main-c-v2-1-67b63dfcb1b8@google.com
2023-10-23wifi: mac80211: rename ieee80211_tx_status() to ieee80211_tx_status_skb()Kalle Valo
make htmldocs warns: Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117. Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'. This is because there's a function named ieee80211_tx_status() and a struct named ieee80211_tx_status. This has been discussed previously but no solution found: https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/ There's also a bug open for three years with no solution in sight: https://github.com/sphinx-doc/sphinx/pull/8313 So I guess we have no other solution than to a workaround this in the code, for example to rename the function to ieee80211_tx_status_skb() to avoid the name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in which the skb is not provided as an argument, instead with ieee80211_tx_status_skb() the skb is provided. Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-07-31 09:03:57 +0000