Age | Commit message (Collapse) | Author |
|
Currently, UDP exchange is prone to failure when cmd attempt to send data
while socat in bkg is not ready. Since, the behavior is probabilistic, this
can result in flakiness for XDP tests. While testing
test_xdp_native_tx_mb() on netdevsim, a failure rate of around 1% in 500
500 iterations was observed.
Use wait_port_listen() to ensure that the bkg socat is started and ready to
receive before cmd start sending. With proposed changes, a re-run of the
same test passed 100% of time.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250724235140.2645885-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to validate the headroom adjustment support for both extension
and the shrinking cases. For the extension part, eat up space from
the start of payload data whereas, for the shrinking part, populate
the newly available space with a tag. In the user-space, validate that a
test string is manipulated accordingly.
The negative and positive offset values result in shrinking and growing of
headroom (growing and shrinking of payload) respectively.
TAP version 13
1..9
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: pkt_sz 512, ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Failed run: pkt_sz 512, ... offset -128. Reason: Adjustment failed
ok 8 xdp.test_xdp_native_adjst_head_grow_data
\# Failed run: pkt_sz (512) > HDS threshold (0) and offset 64 > 48
ok 9 xdp.test_xdp_native_adjst_head_shrnk_data
\# Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-6-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to validate support for the two cases of tail adjustment: 1)
tail extension, and 2) tail shrinking across different frame sizes and
offset values. For each of the two cases, test both the single and
multi-buffer cases by choosing appropriate packet size.
The negative offset value result in growing of tailroom (shrinking of
payload) while the positive offset result in shrinking of tailroom
(growing of payload).
Since the support for tail adjustment varies across drivers, classify the
test as pass if at least one combination of packet size and offset from a
pre-selected list results in a successful run. In case of an unsuccessful
run, report the failure and highlight the packet size and offset values
that caused the test to fail, as well as the values that resulted in the
last successful run.
Note: The growing part of this test for netdevsim may appear flaky when
the offset value is larger than 1. This behavior occurs because tailroom
is not explicitly reserved for netdevsim, with 1 being the typical
tailroom value. However, in certain cases, such as payload being the last
in the page with additional available space, the truesize is expanded.
This also result increases the tailroom causing the test to pass
intermittently. In contrast, when tailrrom is explicitly reserved, such
as in the of fbnic, the test results are deterministic.
./drivers/net/xdp.py
TAP version 13
1..7
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: ... successful run: ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-5-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to verify the XDP_TX functionality by generating traffic from a
remote node on a specific UDP port and redirecting it back to the sender.
./drivers/net/xdp.py
TAP version 13
1..5
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test XDP_PASS/DROP in single buffer and multi buffer mode when
XDP native support is available.
./drivers/net/xdp.py
TAP version 13
1..4
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
\# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|