diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-04-03 15:02:35 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-04-03 15:02:35 -0700 |
| commit | 0e8fb69f287bcf61fb93990f6bb1496ef0122499 (patch) | |
| tree | 276b8bd5339141109e2fa3590f369c731128c2e8 /arch | |
| parent | de3c913c6e9d8bbf8b2d3caaed55ff3e40a62e56 (diff) | |
| parent | f125e2d4339dda6937865f975470b29c84714c9b (diff) | |
Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
Diffstat (limited to 'arch')
58 files changed, 505 insertions, 932 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index b70d7debf5ca..f46e18a77645 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1201,23 +1201,49 @@ choice config STM32F4_DEBUG_UART bool "Use STM32F4 UART for low-level debug" - depends on ARCH_STM32 + depends on MACH_STM32F429 || MACH_STM32F469 select DEBUG_STM32_UART help Say Y here if you want kernel low-level debugging support on STM32F4 based platforms, which default UART is wired on - USART1. + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. If unsure, say N. config STM32F7_DEBUG_UART bool "Use STM32F7 UART for low-level debug" - depends on ARCH_STM32 + depends on MACH_STM32F746 || MACH_STM32F769 select DEBUG_STM32_UART help Say Y here if you want kernel low-level debugging support on STM32F7 based platforms, which default UART is wired on - USART1. + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. + + If unsure, say N. + + config STM32H7_DEBUG_UART + bool "Use STM32H7 UART for low-level debug" + depends on MACH_STM32H743 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32H7 based platforms, which default UART is wired on + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. + + If unsure, say N. + + config STM32MP1_DEBUG_UART + bool "Use STM32MP1 UART for low-level debug" + depends on MACH_STM32MP157 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32MP1 based platforms, wich default UART is wired on + UART4, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT. If unsure, say N. @@ -1619,6 +1645,9 @@ config DEBUG_UART_PHYS default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x3f201000 if DEBUG_BCM2836 default 0x4000e400 if DEBUG_LL_UART_EFM32 + default 0x40010000 if STM32MP1_DEBUG_UART + default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \ + STM32H7_DEBUG_UART default 0x40028000 if DEBUG_AT91_SAMV7_USART1 default 0x40081000 if DEBUG_LPC18XX_UART0 default 0x40090000 if DEBUG_LPC32XX @@ -1713,7 +1742,7 @@ config DEBUG_UART_PHYS DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ - DEBUG_AT91_UART + DEBUG_AT91_UART || DEBUG_STM32_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1779,6 +1808,7 @@ config DEBUG_UART_VIRT default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX default 0xfd883000 if DEBUG_ALPINE_UART0 + default 0xfe010000 if STM32MP1_DEBUG_UART default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART @@ -1823,7 +1853,7 @@ config DEBUG_UART_VIRT DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ - DEBUG_AT91_UART + DEBUG_AT91_UART || DEBUG_STM32_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e1d13d779e08..7d5cd0f85461 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -152,6 +152,7 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000 ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif +textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 textofs-$(CONFIG_ARCH_MESON) := 0x00208000 diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 54f1a21de7e0..15cb35b4a57b 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -56,6 +56,8 @@ CONFIG_CPUFREQ_DT=m # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set CONFIG_ARM_TI_CPUFREQ=y CONFIG_CPU_IDLE=y +CONFIG_ARM_CPUIDLE=y +CONFIG_DT_IDLE_STATES=y CONFIG_KERNEL_MODE_NEON=y CONFIG_PM_DEBUG=y CONFIG_ARM_CRYPTO=y diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S index 1abb32f685fd..f3c4a37210ed 100644 --- a/arch/arm/include/debug/stm32.S +++ b/arch/arm/include/debug/stm32.S @@ -4,14 +4,13 @@ * Author: Gerald Baeza <gerald.baeza@st.com> for STMicroelectronics. */ -#define STM32_UART_BASE 0x40011000 /* USART1 */ - #ifdef CONFIG_STM32F4_DEBUG_UART #define STM32_USART_SR_OFF 0x00 #define STM32_USART_TDR_OFF 0x04 #endif -#ifdef CONFIG_STM32F7_DEBUG_UART +#if defined(CONFIG_STM32F7_DEBUG_UART) || defined(CONFIG_STM32H7_DEBUG_UART) || \ + defined(CONFIG_STM32MP1_DEBUG_UART) #define STM32_USART_SR_OFF 0x1C #define STM32_USART_TDR_OFF 0x28 #endif @@ -20,8 +19,8 @@ #define STM32_USART_TXE (1 << 7) /* Tx data reg empty */ .macro addruart, rp, rv, tmp - ldr \rp, =STM32_UART_BASE @ physical base - ldr \rv, =STM32_UART_BASE @ virt base /* NoMMU */ + ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical base + ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virt base .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 7979420bd48b..ccd7e80ce943 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -153,7 +153,6 @@ config HAVE_AT91_USB_CLK config COMMON_CLK_AT91 bool - select COMMON_CLK select MFD_SYSCON config HAVE_AT91_SMD diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 374b9d155558..074bde64064e 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -736,13 +736,36 @@ backup_default: struct pmc_info { unsigned long uhp_udp_mask; + unsigned long mckr; + unsigned long version; }; static const struct pmc_info pmc_infos[] __initconst = { - { .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP }, - { .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP }, - { .uhp_udp_mask = AT91SAM926x_PMC_UHP }, - { .uhp_udp_mask = 0 }, + { + .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP, + .mckr = 0x30, + .version = AT91_PMC_V1, + }, + + { + .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP, + .mckr = 0x30, + .version = AT91_PMC_V1, + }, + { + .uhp_udp_mask = AT91SAM926x_PMC_UHP, + .mckr = 0x30, + .version = AT91_PMC_V1, + }, + { .uhp_udp_mask = 0, + .mckr = 0x30, + .version = AT91_PMC_V1, + }, + { + .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP, + .mckr = 0x28, + .version = AT91_PMC_V2, + }, }; static const struct of_device_id atmel_pmc_ids[] __initconst = { @@ -757,7 +780,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = { { .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] }, { .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] }, { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] }, - { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[1] }, + { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] }, { /* sentinel */ }, }; @@ -779,6 +802,8 @@ static void __init at91_pm_init(void (*pm_idle)(void)) pmc = of_id->data; soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask; + soc_pm.data.pmc_mckr_offset = pmc->mckr; + soc_pm.data.pmc_version = pmc->version; if (pm_idle) arm_pm_idle = pm_idle; diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 9fa4f483f2b5..218e8d1a30fb 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -33,6 +33,8 @@ struct at91_pm_data { void __iomem *sfrbu; unsigned int standby_mode; unsigned int suspend_mode; + unsigned int pmc_mckr_offset; + unsigned int pmc_version; }; #endif diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c index f2d893c03cd9..82089ff258c0 100644 --- a/arch/arm/mach-at91/pm_data-offsets.c +++ b/arch/arm/mach-at91/pm_data-offsets.c @@ -12,6 +12,10 @@ int main(void) DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode)); DEFINE(PM_DATA_SHDWC, offsetof(struct at91_pm_data, shdwc)); DEFINE(PM_DATA_SFRBU, offsetof(struct at91_pm_data, sfrbu)); + DEFINE(PM_DATA_PMC_MCKR_OFFSET, offsetof(struct at91_pm_data, + pmc_mckr_offset)); + DEFINE(PM_DATA_PMC_VERSION, offsetof(struct at91_pm_data, + pmc_version)); return 0; } diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index ed57c879d4e1..be9764e8d3fa 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -18,6 +18,7 @@ pmc .req r0 tmp1 .req r4 tmp2 .req r5 +tmp3 .req r6 /* * Wait until master clock is ready (after switching master clock source) @@ -93,13 +94,17 @@ ENTRY(at91_pm_suspend_in_sram) str tmp1, .memtype ldr tmp1, [r0, #PM_DATA_MODE] str tmp1, .pm_mode + ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] + str tmp1, .mckr_offset + ldr tmp1, [r0, #PM_DATA_PMC_VERSION] + str tmp1, .pmc_version /* Both ldrne below are here to preload their address in the TLB */ ldr tmp1, [r0, #PM_DATA_SHDWC] str tmp1, .shdwc cmp tmp1, #0 ldrne tmp2, [tmp1, #0] ldr tmp1, [r0, #PM_DATA_SFRBU] - str tmp1, .sfr + str tmp1, .sfrbu cmp tmp1, #0 ldrne tmp2, [tmp1, #0x10] @@ -138,14 +143,15 @@ ENDPROC(at91_pm_suspend_in_sram) ENTRY(at91_backup_mode) /* Switch the master clock source to slow clock. */ ldr pmc, .pmc_base - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp2, .mckr_offset + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy /*BUMEN*/ - ldr r0, .sfr + ldr r0, .sfrbu mov tmp1, #0x1 str tmp1, [r0, #0x10] @@ -218,6 +224,7 @@ ENDPROC(at91_backup_mode) */ .macro at91_pm_ulp1_mode ldr pmc, .pmc_base + ldr tmp2, .mckr_offset /* Save RC oscillator state and check if it is enabled. */ ldr tmp1, [pmc, #AT91_PMC_SR] @@ -254,10 +261,10 @@ ENDPROC(at91_backup_mode) str tmp1, [pmc, #AT91_CKGR_MOR] /* Switch the master clock source to main clock */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS orr tmp1, tmp1, #AT91_PMC_CSS_MAIN - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy @@ -268,6 +275,10 @@ ENDPROC(at91_backup_mode) orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] + /* Quirk for SAM9X60's PMC */ + nop + nop + wait_mckrdy /* Enable the crystal oscillator */ @@ -280,9 +291,9 @@ ENDPROC(at91_backup_mode) wait_moscrdy /* Switch the master clock source to slow clock */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy @@ -296,10 +307,10 @@ ENDPROC(at91_backup_mode) wait_moscsels /* Switch the master clock source to main clock */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS orr tmp1, tmp1, #AT91_PMC_CSS_MAIN - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy @@ -323,21 +334,160 @@ ENDPROC(at91_backup_mode) 3: .endm +.macro at91_plla_disable + /* Save PLLA setting and disable it */ + ldr tmp1, .pmc_version + cmp tmp1, #AT91_PMC_V1 + beq 1f + +#ifdef CONFIG_SOC_SAM9X60 + /* Save PLLA settings. */ + ldr tmp2, [pmc, #AT91_PMC_PLL_UPDT] + bic tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID + str tmp2, [pmc, #AT91_PMC_PLL_UPDT] + + /* save div. */ + mov tmp1, #0 + ldr tmp2, [pmc, #AT91_PMC_PLL_CTRL0] + bic tmp2, tmp2, #0xffffff00 + orr tmp1, tmp1, tmp2 + + /* save mul. */ + ldr tmp2, [pmc, #AT91_PMC_PLL_CTRL1] + bic tmp2, tmp2, #0xffffff + orr tmp1, tmp1, tmp2 + str tmp1, .saved_pllar + + /* step 2. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + /* step 3. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + bic tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK + orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL + str tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + + /* step 4. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + /* step 5. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + bic tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL + str tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + + /* step 7. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + b 2f +#endif + +1: /* Save PLLA setting and disable it */ + ldr tmp1, [pmc, #AT91_CKGR_PLLAR] + str tmp1, .saved_pllar + + /* Disable PLLA. */ + mov tmp1, #AT91_PMC_PLLCOUNT + orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ + str tmp1, [pmc, #AT91_CKGR_PLLAR] +2: +.endm + +.macro at91_plla_enable + ldr tmp2, .saved_pllar + ldr tmp3, .pmc_version + cmp tmp3, #AT91_PMC_V1 + beq 4f + +#ifdef CONFIG_SOC_SAM9X60 + /* step 1. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + /* step 2. */ + ldr tmp1, =#AT91_PMC_PLL_ACR_DEFAULT_PLLA + str tmp1, [pmc, #AT91_PMC_PLL_ACR] + + /* step 3. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL1] + mov tmp3, tmp2 + bic tmp3, tmp3, #0xffffff + orr tmp1, tmp1, tmp3 + str tmp1, [pmc, #AT91_PMC_PLL_CTRL1] + + /* step 8. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + /* step 9. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENLOCK + orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL + orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK + bic tmp1, tmp1, #0xff + mov tmp3, tmp2 + bic tmp3, tmp3, #0xffffff00 + orr tmp1, tmp1, tmp3 + str tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + + /* step 10. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + /* step 11. */ +3: ldr tmp1, [pmc, #AT91_PMC_PLL_ISR0] + tst tmp1, #0x1 + beq 3b + b 2f +#endif + + /* Restore PLLA setting */ +4: str tmp2, [pmc, #AT91_CKGR_PLLAR] + + /* Enable PLLA. */ + tst tmp2, #(AT91_PMC_MUL & 0xff0000) + bne 1f + tst tmp2, #(AT91_PMC_MUL & ~0xff0000) + beq 2f + +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_LOCKA + beq 1b +2: +.endm + ENTRY(at91_ulp_mode) ldr pmc, .pmc_base + ldr tmp2, .mckr_offset /* Save Master clock setting */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] str tmp1, .saved_mckr /* * Set the Master clock source to slow clock */ bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy + at91_plla_disable + ldr r0, .pm_mode cmp r0, #AT91_PM_ULP1 beq ulp1_mode @@ -352,11 +502,14 @@ ulp1_mode: ulp_exit: ldr pmc, .pmc_base + at91_plla_enable + /* * Restore master clock setting */ - ldr tmp1, .saved_mckr - str tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, .mckr_offset + ldr tmp2, .saved_mckr + str tmp2, [pmc, tmp1] wait_mckrdy @@ -496,14 +649,20 @@ ENDPROC(at91_sramc_self_refresh) .word 0 .shdwc: .word 0 -.sfr: +.sfrbu: .word 0 .memtype: .word 0 .pm_mode: .word 0 +.mckr_offset: + .word 0 +.pmc_version: + .word 0 .saved_mckr: .word 0 +.saved_pllar: + .word 0 .saved_sam9_lpr: .word 0 .saved_sam9_lpr1: diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index fcfe2a0e8058..6aa938b949db 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -20,7 +20,6 @@ config ARCH_BCM_IPROC select GPIOLIB select ARM_AMBA select PINCTRL - select PCI_DOMAINS_GENERIC if PCI help This enables support for systems based on Broadcom IPROC architected SoCs. The IPROC complex contains one or more ARM CPUs along with common @@ -54,7 +53,6 @@ config ARCH_BCM_NSP select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_ERRATA_764369 if SMP - select HAVE_SMP select THERMAL select THERMAL_OF help @@ -73,7 +71,6 @@ config ARCH_BCM_5301X select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_ERRATA_764369 if SMP - select HAVE_SMP help Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores. @@ -109,7 +106,6 @@ config ARCH_BCM_281XX bool "Broadcom BCM281XX SoC family" depends on ARCH_MULTI_V7 select ARCH_BCM_MOBILE - select HAVE_SMP help Enable support for the BCM281XX family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 @@ -119,7 +115,6 @@ config ARCH_BCM_21664 bool "Broadcom BCM21664 SoC family" depends on ARCH_MULTI_V7 select ARCH_BCM_MOBILE - select HAVE_SMP help Enable support for the BCM21664 family, which includes BCM21663 and BCM21664 variants. @@ -128,7 +123,6 @@ config ARCH_BCM_23550 bool "Broadcom BCM23550 SoC" depends on ARCH_MULTI_V7 select ARCH_BCM_MOBILE - select HAVE_SMP help Enable support for the BCM23550. @@ -165,7 +159,6 @@ config ARCH_BCM2835 select ZONE_DMA if ARCH_MULTI_V7 select ARM_TIMER_SP804 select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 - select TIMER_OF select BCM2835_TIMER select PINCTRL select PINCTRL_BCM2835 @@ -201,7 +194,6 @@ config ARCH_BCM_63XX select HAVE_ARM_ARCH_TIMER select HAVE_ARM_TWD if SMP select HAVE_ARM_SCU if SMP - select HAVE_SMP help This enables support for systems based on Broadcom DSL SoCs. It currently supports the 'BCM63XX' ARM-based family, which includes diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 1d61a7701c11..e4f4b20b83a2 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -189,12 +189,6 @@ static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction cns3xxx_timer_irq = { - .name = "timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = cns3xxx_timer_interrupt, -}; - /* * Set up the clock source and clock events devices */ @@ -245,7 +239,9 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq) writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); /* Make irqs happen for the system timer */ - setup_irq(timer_irq, &cns3xxx_timer_irq); + if (request_irq(timer_irq, cns3xxx_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL)) + pr_err("Failed to request irq %d (timer)\n", timer_irq); cns3xxx_clockevents_init(timer_irq); } diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 01b830afcea9..dbe970e37895 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -48,7 +48,7 @@ /***************************************************************************** * I/O Address Mapping ****************************************************************************/ -static struct map_desc dove_io_desc[] __initdata = { +static struct map_desc __maybe_unused dove_io_desc[] __initdata = { { .virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE), diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c index de998830f534..dd4b164d1831 100644 --- a/arch/arm/mach-ep93xx/timer-ep93xx.c +++ b/arch/arm/mach-ep93xx/timer-ep93xx.c @@ -117,15 +117,11 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction ep93xx_timer_irq = { - .name = "ep93xx timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = ep93xx_timer_interrupt, - .dev_id = &ep93xx_clockevent, -}; - void __init ep93xx_timer_init(void) { + int irq = IRQ_EP93XX_TIMER3; + unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL; + /* Enable and register clocksource and sched_clock on timer 4 */ writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, EP93XX_TIMER4_VALUE_HIGH); @@ -136,7 +132,9 @@ void __init ep93xx_timer_init(void) EP93XX_TIMER4_RATE); /* Set up clockevent on timer 3 */ - setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq); + if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer", + &ep93xx_clockevent)) + pr_err("Failed to request irq %d (ep93xx timer)\n", irq); clockevents_config_and_register(&ep93xx_clockevent, EP93XX_TIMER123_RATE, 1, diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 95584ee02b55..e7d7b90e2cf8 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -471,8 +471,6 @@ config SOC_IMX53 config SOC_IMX6 bool select ARM_CPU_SUSPEND if (PM || CPU_IDLE) - select ARM_ERRATA_754322 - select ARM_ERRATA_775420 select ARM_GIC select HAVE_IMX_ANATOP select HAVE_IMX_GPC @@ -484,6 +482,8 @@ config SOC_IMX6 config SOC_IMX6Q bool "i.MX6 Quad/DualLite support" select ARM_ERRATA_764369 if SMP + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD select PINCTRL_IMX6Q @@ -494,6 +494,8 @@ config SOC_IMX6Q config SOC_IMX6SL bool "i.MX6 SoloLite support" + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 select PINCTRL_IMX6SL select SOC_IMX6 @@ -502,6 +504,8 @@ config SOC_IMX6SL config SOC_IMX6SLL bool "i.MX6 SoloLiteLite support" + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 select PINCTRL_IMX6SLL select SOC_IMX6 @@ -510,6 +514,8 @@ config SOC_IMX6SLL config SOC_IMX6SX bool "i.MX6 SoloX support" + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 select PINCTRL_IMX6SX select SOC_IMX6 diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 8fb68c0ec34c..d841bed8664d 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -89,12 +89,11 @@ void imx_anatop_post_resume(void) if (cpu_is_imx6sl()) imx_anatop_disconnect_high_snvs(false); - } void __init imx_init_revision_from_anatop(void) { - struct device_node *np; + struct device_node *np, *src_np; void __iomem *anatop_base; unsigned int revision; u32 digprog; @@ -135,9 +134,10 @@ void __init imx_init_revision_from_anatop(void) void __iomem *src_base; u32 sbmr2; - np = of_find_compatible_node(NULL, NULL, + src_np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-src"); src_base = of_iomap(np, 0); + of_node_put(src_np); WARN_ON(!src_base); sbmr2 = readl_relaxed(src_base + SRC_SBMR2); iounmap(src_base); @@ -149,6 +149,7 @@ void __init imx_init_revision_from_anatop(void) } } } + of_node_put(np); mxc_set_cpu_type(digprog >> 16 & 0xff); imx_set_soc_revision(revision); diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index b5b557fe2c49..ebc4339b8be4 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -10,7 +10,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/irqchip/arm-gic.h> + #include "common.h" #include "hardware.h" @@ -111,7 +111,6 @@ void imx_gpc_mask_all(void) gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4); writel_relaxed(~0, reg_imr1 + i * 4); } - } void imx_gpc_restore_all(void) @@ -282,4 +281,5 @@ void __init imx_gpc_check_dt(void) /* map GPC, so that at least CPUidle and WARs keep working */ gpc_base = of_iomap(np, 0); } + of_node_put(np); } diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index edd26e0ffeec..284bce1112d2 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -5,29 +5,16 @@ */ #include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/cpu.h> -#include <linux/delay.h> -#include <linux/export.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/irq.h> #include <linux/irqchip.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/pm_opp.h> #include <linux/pci.h> #include <linux/phy.h> -#include <linux/reboot.h> #include <linux/regmap.h> #include <linux/micrel_phy.h> #include <linux/mfd/syscon.h> #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/system_misc.h> #include "common.h" #include "cpuidle.h" diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index e00818abe54d..e27a6889cc56 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -4,7 +4,6 @@ */ #include <linux/irqchip.h> -#include <linux/of.h> #include <linux/of_platform.h> #include <linux/mfd/syscon.h> #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index 311f5e4ff723..3b0e16ccd59d 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -25,7 +25,6 @@ static void __init imx6ul_enet_clk_init(void) IMX6UL_GPR1_ENET_CLK_OUTPUT); else pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n"); - } static int ksz8081_phy_fixup(struct phy_device *dev) diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 2aa26928221d..cf4e9335831c 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -109,6 +109,7 @@ static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus) np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg"); dcfg_base = of_iomap(np, 0); + of_node_put(np); BUG_ON(!dcfg_base); paddr = __pa_symbol(secondary_startup); diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 1c0ecad3620e..dd34dff13762 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -655,6 +655,8 @@ void __init imx6_pm_ccm_init(const char *ccm_compat) if (of_property_read_bool(np, "fsl,pmic-stby-poweroff")) imx6_pm_stby_poweroff_probe(); + + of_node_put(np); } void __init imx6q_pm_init(void) diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c index 7b2f7387e662..2e756d8191fa 100644 --- a/arch/arm/mach-imx/pm-imx7ulp.c +++ b/arch/arm/mach-imx/pm-imx7ulp.c @@ -62,6 +62,7 @@ void __init imx7ulp_pm_init(void) np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1"); smc1_base = of_iomap(np, 0); + of_node_put(np); WARN_ON(!smc1_base); imx7ulp_set_lpm(ULP_PM_RUN); diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 0beea6d0217f..f52f371292ac 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -43,9 +43,6 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev, int bit; u32 val; - if (!src_base) - return -ENODEV; - if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits)) return -EINVAL; diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c index 18a4df5c1baa..ae533b66fefd 100644 --- a/arch/arm/mach-iop32x/time.c +++ b/arch/arm/mach-iop32x/time.c @@ -137,13 +137,6 @@ iop_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction iop_timer_irq = { - .name = "IOP Timer Tick", - .handler = iop_timer_interrupt, - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .dev_id = &iop_clockevent, -}; - static unsigned long iop_tick_rate; unsigned long get_iop_tick_rate(void) { @@ -154,6 +147,7 @@ EXPORT_SYMBOL(get_iop_tick_rate); void __init iop_init_time(unsigned long tick_rate) { u32 timer_ctl; + int irq = IRQ_IOP32X_TIMER0; sched_clock_register(iop_read_sched_clock, 32, tick_rate); @@ -168,7 +162,9 @@ void __init iop_init_time(unsigned long tick_rate) */ write_tmr0(timer_ctl & ~IOP_TMR_EN); write_tisr(1); - setup_irq(IRQ_IOP32X_TIMER0, &iop_timer_irq); + if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, + "IOP Timer Tick", &iop_clockevent)) + pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq); iop_clockevent.cpumask = cpumask_of(0); clockevents_config_and_register(&iop_clockevent, tick_rate, 0xf, 0xfffffffe); diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index c65cfc1ad99b..049a65f47b42 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -175,13 +175,6 @@ static void __init timer_config(void) __raw_writel(0x2, mmp_timer_base + TMR_CER); } -static struct irqaction timer_irq = { - .name = "timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = timer_interrupt, - .dev_id = &ckevt, -}; - void __init mmp_timer_init(int irq, unsigned long rate) { timer_config(); @@ -190,7 +183,9 @@ void __init mmp_timer_init(int irq, unsigned long rate) ckevt.cpumask = cpumask_of(0); - setup_irq(irq, &timer_irq); + if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, + "timer", &ckevt)) + pr_err("Failed to request irq %d (timer)\n", irq); clocksource_register_hz(&cksrc, rate); clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA); diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index d068958d6f8a..2c1e2b32b9b3 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -596,11 +596,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev) return IRQ_HANDLED; } -static struct irqaction omap_wakeup_irq = { - .name = "peripheral wakeup", - .handler = omap_wakeup_interrupt -}; - static const struct platform_suspend_ops omap_pm_ops = { @@ -613,6 +608,7 @@ static const struct platform_suspend_ops omap_pm_ops = { static int __init omap_pm_init(void) { int error = 0; + int irq; if (!cpu_class_is_omap1()) return -ENODEV; @@ -656,9 +652,12 @@ static int __init omap_pm_init(void) arm_pm_idle = omap1_pm_idle; if (cpu_is_omap7xx()) - setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); + irq = INT_7XX_WAKE_UP_REQ; else if (cpu_is_omap16xx()) - setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); + irq = INT_1610_WAKE_UP_REQ; + if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", + NULL)) + pr_err("Failed to request irq %d (peripheral wakeup)\n", irq); /* Program new power ramp-up time * (0 for most boards since we don't lower voltage when in deep sleep) diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 524977a31a49..de590a85a42b 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -155,15 +155,11 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction omap_mpu_timer1_irq = { - .name = "mpu_timer1", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = omap_mpu_timer1_interrupt, -}; - static __init void omap_init_mpu_timer(unsigned long rate) { - setup_irq(INT_TIMER1, &omap_mpu_timer1_irq); + if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL)) + pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1); omap_mpu_timer_start(0, (rate / HZ) - 1, 1); clockevent_mpu_timer1.cpumask = cpumask_of(0); diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 0ae6c52a7d70..780fdf03c3ce 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -148,15 +148,11 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction omap_32k_timer_irq = { - .name = "32KHz timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = omap_32k_timer_interrupt, -}; - static __init void omap_init_32k_timer(void) { - setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); + if (request_irq(INT_OS_TIMER, omap_32k_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "32KHz timer", NULL)) + pr_err("Failed to request irq %d(32KHz timer)\n", INT_OS_TIMER); clockevent_32k_timer.cpumask = cpumask_of(0); clockevents_config_and_register(&clockevent_32k_timer, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 17d337ed18be..82706af307de 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3148,15 +3148,14 @@ static int omap_hwmod_check_sysc(struct device *dev, /** * omap_hwmod_init_regbits - init sysconfig specific register bits * @dev: struct device + * @oh: module * @data: module data * @sysc_fields: new sysc configuration */ -static int omap_hwmod_init_regbits(struct device *dev, +static int omap_hwmod_init_regbits(struct device *dev, struct omap_hwmod *oh, const struct ti_sysc_module_data *data, struct sysc_regbits **sysc_fields) { - *sysc_fields = NULL; - switch (data->cap->type) { case TI_SYSC_OMAP2: case TI_SYSC_OMAP2_TIMER: @@ -3191,6 +3190,12 @@ static int omap_hwmod_init_regbits(struct device *dev, *sysc_fields = &omap_hwmod_sysc_type_usb_host_fs; break; default: + *sysc_fields = NULL; + if (!oh->class->sysc->sysc_fields) + return 0; + + dev_err(dev, "sysc_fields not found\n"); + return -EINVAL; } @@ -3356,9 +3361,9 @@ static int omap_hwmod_check_module(struct device *dev, if (!oh->class->sysc) return -ENODEV; - if (sysc_fields != oh->class->sysc->sysc_fields) - dev_warn(dev, "sysc_fields %p != %p\n", sysc_fields, - oh->class->sysc->sysc_fields); + if (oh->class->sysc->sysc_fields && + sysc_fields != oh->class->sysc->sysc_fields) + dev_warn(dev, "sysc_fields mismatch\n"); if (rev_offs != oh->class->sysc->rev_offs) dev_warn(dev, "rev_offs %08x != %08x\n", rev_offs, @@ -3574,7 +3579,7 @@ int omap_hwmod_init_module(struct device *dev, cookie->data = oh; - error = omap_hwmod_init_regbits(dev, data, &sysc_fields); + error = omap_hwmod_init_regbits(dev, oh, data, &sysc_fields); if (error) return error; diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c index 7461b0346549..5455fc98c60e 100644 --- a/arch/arm/mach-omap2/pm33xx-core.c +++ b/arch/arm/mach-omap2/pm33xx-core.c @@ -6,11 +6,14 @@ * Dave Gerlach */ +#include <linux/cpuidle.h> +#include <linux/platform_data/pm33xx.h> +#include <asm/cpuidle.h> #include <asm/smp_scu.h> #include <asm/suspend.h> #include <linux/errno.h> -#include <linux/platform_data/pm33xx.h> #include <linux/clk.h> +#include <linux/cpu.h> #include <linux/platform_data/gpio-omap.h> #include <linux/pinctrl/pinmux.h> #include <linux/wkup_m3_ipc.h> @@ -35,6 +38,14 @@ static struct clockdomain *gfx_l4ls_clkdm; static void __iomem *scu_base; static struct omap_hwmod *rtc_oh; +static int (*idle_fn)(u32 wfi_flags); + +struct amx3_idle_state { + int wfi_flags; +}; + +static struct amx3_idle_state *idle_states; + static int am43xx_map_scu(void) { scu_base = ioremap(scu_a9_get_base(), SZ_256); @@ -68,7 +79,7 @@ static int am43xx_check_off_mode_enable(void) return 0; } -static int amx3_common_init(void) +static int amx3_common_init(int (*idle)(u32 wfi_flags)) { gfx_pwrdm = pwrdm_lookup("gfx_pwrdm"); per_pwrdm = pwrdm_lookup("per_pwrdm"); @@ -88,10 +99,12 @@ static int amx3_common_init(void) else omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF); + idle_fn = idle; + return 0; } -static int am33xx_suspend_init(void) +static int am33xx_suspend_init(int (*idle)(u32 wfi_flags)) { int ret; @@ -102,12 +115,12 @@ static int am33xx_suspend_init(void) return -ENODEV; } - ret = amx3_common_init(); + ret = amx3_common_init(idle); return ret; } -static int am43xx_suspend_init(void) +static int am43xx_suspend_init(int (*idle)(u32 wfi_flags)) { int ret = 0; @@ -117,11 +130,17 @@ static int am43xx_suspend_init(void) return ret; } - ret = amx3_common_init(); + ret = amx3_common_init(idle); return ret; } +static int amx3_suspend_deinit(void) +{ + idle_fn = NULL; + return 0; +} + static void amx3_pre_suspend_common(void) { omap_set_pwrdm_state(gfx_pwrdm, PWRDM_POWER_OFF); @@ -201,6 +220,43 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long), return ret; } +static int am33xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args) +{ + int ret = 0; + + if (omap_irq_pending() || need_resched()) + return ret; + + ret = cpu_suspend(args, fn); + + return ret; +} + +static int am43xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args) +{ + int ret = 0; + + if (!scu_base) + return 0; + + scu_power_mode(scu_base, SCU_PM_DORMANT); + ret = cpu_suspend(args, fn); + scu_power_mode(scu_base, SCU_PM_NORMAL); + + return ret; +} + +static void amx3_begin_suspend(void) +{ + cpu_idle_poll_ctrl(true); +} + +static void amx3_finish_suspend(void) +{ + cpu_idle_poll_ctrl(false); +} + + static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void) { if (soc_is_am33xx()) @@ -253,7 +309,11 @@ static void am43xx_prepare_rtc_resume(void) static struct am33xx_pm_platform_data am33xx_ops = { .init = am33xx_suspend_init, + .deinit = amx3_suspend_deinit, .soc_suspend = am33xx_suspend, + .cpu_suspend = am33xx_cpu_suspend, + .begin_suspend = amx3_begin_suspend, + .finish_suspend = amx3_finish_suspend, .get_sram_addrs = amx3_get_sram_addrs, .save_context = am33xx_save_context, .restore_context = am33xx_restore_context, @@ -265,7 +325,11 @@ static struct am33xx_pm_platform_data am33xx_ops = { static struct am33xx_pm_platform_data am43xx_ops = { .init = am43xx_suspend_init, + .deinit = amx3_suspend_deinit, .soc_suspend = am43xx_suspend, + .cpu_suspend = am43xx_cpu_suspend, + .begin_suspend = amx3_begin_suspend, + .finish_suspend = amx3_finish_suspend, .get_sram_addrs = amx3_get_sram_addrs, .save_context = am43xx_save_context, .restore_context = am43xx_restore_context, @@ -301,3 +365,64 @@ int __init amx3_common_pm_init(void) return 0; } + +static int __init amx3_idle_init(struct device_node *cpu_node, int cpu) +{ + struct device_node *state_node; + struct amx3_idle_state states[CPUIDLE_STATE_MAX]; + int i; + int state_count = 1; + + for (i = 0; ; i++) { + state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); + if (!state_node) + break; + + if (!of_device_is_available(state_node)) + continue; + + if (i == CPUIDLE_STATE_MAX) { + pr_warn("%s: cpuidle states reached max possible\n", + __func__); + break; + } + + states[state_count].wfi_flags = 0; + + if (of_property_read_bool(state_node, "ti,idle-wkup-m3")) + states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 | + WFI_FLAG_FLUSH_CACHE; + + state_count++; + } + + idle_states = kcalloc(state_count, sizeof(*idle_states), GFP_KERNEL); + if (!idle_states) + return -ENOMEM; + + for (i = 1; i < state_count; i++) + idle_states[i].wfi_flags = states[i].wfi_flags; + + return 0; +} + +static int amx3_idle_enter(unsigned long index) +{ + struct amx3_idle_state *idle_state = &idle_states[index]; + + if (!idle_state) + return -EINVAL; + + if (idle_fn) + idle_fn(idle_state->wfi_flags); + + return 0; +} + +static struct cpuidle_ops amx3_cpuidle_ops __initdata = { + .init = amx3_idle_init, + .suspend = amx3_idle_enter, +}; + +CPUIDLE_METHOD_OF_DECLARE(pm33xx_idle, "ti,am3352", &amx3_cpuidle_ops); +CPUIDLE_METHOD_OF_DECLARE(pm43xx_idle, "ti,am4372", &amx3_cpuidle_ops); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 0d0a731cb476..8b09cdacc30d 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -91,12 +91,6 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction omap2_gp_timer_irq = { - .name = "gp_timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = omap2_gp_timer_interrupt, -}; - static int omap2_gp_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { @@ -382,8 +376,9 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, &clockevent_gpt.name, OMAP_TIMER_POSTED); BUG_ON(res); - omap2_gp_timer_irq.dev_id = &clkev; - setup_irq(clkev.irq, &omap2_gp_timer_irq); + if (request_irq(clkev.irq, omap2_gp_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev)) + pr_err("Failed to request irq %d (gp_timer)\n", clkev.irq); __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW); diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index cf9cb3d2590e..e94a61901ffd 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -3,7 +3,6 @@ menuconfig ARCH_ORION5X bool "Marvell Orion" depends on MMU && ARCH_MULTI_V5 select CPU_FEROCEON - select GENERIC_CLOCKEVENTS select GPIOLIB select MVEBU_MBUS select FORCE_PCI @@ -18,7 +17,6 @@ if ARCH_ORION5X config ARCH_ORION5X_DT bool "Marvell Orion5x Flattened Device Tree" - select USE_OF select ORION_CLK select ORION_IRQCHIP select ORION_TIMER diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index fda9b75c3a33..a39764faf2a0 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -398,7 +398,6 @@ static int ts78xx_fpga_load_devices(void) static int ts78xx_fpga_unload_devices(void) { - int ret = 0; if (ts78xx_fpga.supports.ts_rtc.present == 1) ts78xx_ts_rtc_unload(); @@ -407,7 +406,7 @@ static int ts78xx_fpga_unload_devices(void) if (ts78xx_fpga.supports.ts_rng.present == 1) ts78xx_ts_rng_unload(); - return ret; + return 0; } static int ts78xx_fpga_load(void) diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index ecbf3c4eb878..1772eccb5caf 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -12,6 +12,11 @@ menuconfig ARCH_QCOM if ARCH_QCOM +config ARCH_IPQ40XX + bool "Enable support for IPQ40XX" + select CLKSRC_QCOM + select HAVE_ARM_ARCH_TIMER + config ARCH_MSM8X60 bool "Enable support for MSM8X60" select CLKSRC_QCOM diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index b13ec9088ce5..86406e3f9b22 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -72,7 +72,6 @@ static const char *const r8a7779_compat_dt[] __initconst = { DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)") .smp = smp_ops(r8a7779_smp_ops), .map_io = r8a7779_map_io, - .init_early = shmobile_init_delay, .init_irq = r8a7779_init_irq_dt, .init_late = shmobile_init_late, .dt_compat = r8a7779_compat_dt, diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 2fd3aa6f3212..1ee5cd2840e0 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -7,7 +7,6 @@ * Copyright (C) 2014 Ulrich Hecht */ -#include <linux/clk-provider.h> #include <linux/clocksource.h> #include <linux/device.h> #include <linux/dma-contiguous.h> @@ -15,6 +14,7 @@ #include <linux/kernel.h> #include <linux/memblock.h> #include <linux/of.h> +#include <linux/of_clk.h> #include <linux/of_fdt.h> #include <linux/of_platform.h> #include <linux/psci.h> diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index cc08aa752244..eb4a62fa4289 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -56,7 +56,6 @@ static const char *const sh73a0_boards_compat_dt[] __initconst = { DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") .smp = smp_ops(sh73a0_smp_ops), .map_io = sh73a0_map_io, - .init_early = shmobile_init_delay, .init_machine = sh73a0_generic_init, .init_late = shmobile_init_late, .dt_compat = sh73a0_boards_compat_dt, diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c index 289e036c9c30..d1fdb6066f7b 100644 --- a/arch/arm/mach-spear/time.c +++ b/arch/arm/mach-spear/time.c @@ -181,12 +181,6 @@ static irqreturn_t spear_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction spear_timer_irq = { - .name = "timer", - .flags = IRQF_TIMER, - .handler = spear_timer_interrupt -}; - static void __init spear_clockevent_init(int irq) { u32 tick_rate; @@ -201,7 +195,8 @@ static void __init spear_clockevent_init(int irq) clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0); - setup_irq(irq, &spear_timer_irq); + if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL)) + pr_err("Failed to request irq %d (timer)\n", irq); } static const struct of_device_id timer_of_match[] __initconst = { diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 933b6930f024..06da2747a90b 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -10,9 +10,9 @@ * warranty of any kind, whether express or implied. */ -#include <linux/clk-provider.h> #include <linux/clocksource.h> #include <linux/init.h> +#include <linux/of_clk.h> #include <linux/platform_device.h> #include <linux/reset/sunxi.h> diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 6c1dff2eccc2..07572b5373b8 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -8,29 +8,14 @@ obj-y += reset.o obj-y += reset-handler.o obj-y += sleep.o obj-y += tegra.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o +obj-y += sleep-tegra20.o +obj-y += sleep-tegra30.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pm-tegra20.o -ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o -endif -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o -ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o -endif obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o -ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o -endif -obj-$(CONFIG_ARCH_TEGRA_124_SOC) += sleep-tegra30.o obj-$(CONFIG_ARCH_TEGRA_124_SOC) += pm-tegra30.o -ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_TEGRA_124_SOC) += cpuidle-tegra114.o -endif obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c deleted file mode 100644 index 5118f777fd66..000000000000 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ /dev/null @@ -1,89 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. - */ - -#include <asm/firmware.h> -#include <linux/tick.h> -#include <linux/cpuidle.h> -#include <linux/cpu_pm.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <linux/firmware/trusted_foundations.h> - -#include <asm/cpuidle.h> -#include <asm/smp_plat.h> -#include <asm/suspend.h> -#include <asm/psci.h> - -#include "cpuidle.h" -#include "pm.h" -#include "sleep.h" - -#ifdef CONFIG_PM_SLEEP -#define TEGRA114_MAX_STATES 2 -#else -#define TEGRA114_MAX_STATES 1 -#endif - -#ifdef CONFIG_PM_SLEEP -static int tegra114_idle_power_down(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - local_fiq_disable(); - - tegra_set_cpu_in_lp2(); - cpu_pm_enter(); - - call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2); - - /* Do suspend by ourselves if the firmware does not implement it */ - if (call_firmware_op(do_idle, 0) == -ENOSYS) - cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - - cpu_pm_exit(); - tegra_clear_cpu_in_lp2(); - - local_fiq_enable(); - - return index; -} - -static void tegra114_idle_enter_s2idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - tegra114_idle_power_down(dev, drv, index); -} -#endif - -static struct cpuidle_driver tegra_idle_driver = { - .name = "tegra_idle", - .owner = THIS_MODULE, - .state_count = TEGRA114_MAX_STATES, - .states = { - [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), -#ifdef CONFIG_PM_SLEEP - [1] = { - .enter = tegra114_idle_power_down, - .enter_s2idle = tegra114_idle_enter_s2idle, - .exit_latency = 500, - .target_residency = 1000, - .flags = CPUIDLE_FLAG_TIMER_STOP, - .power_usage = 0, - .name = "powered-down", - .desc = "CPU power gated", - }, -#endif - }, -}; - -int __init tegra114_cpuidle_init(void) -{ - if (!psci_smp_available()) - return cpuidle_register(&tegra_idle_driver, NULL); - - return 0; -} diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c deleted file mode 100644 index 69f3fa270fbe..000000000000 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ /dev/null @@ -1,212 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * CPU idle driver for Tegra CPUs - * - * Copyright (c) 2010-2012, NVIDIA Corporation. - * Copyright (c) 2011 Google, Inc. - * Author: Colin Cross <ccross@android.com> - * Gary King <gking@nvidia.com> - * - * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> - */ - -#include <linux/clk/tegra.h> -#include <linux/tick.h> -#include <linux/cpuidle.h> -#include <linux/cpu_pm.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <soc/tegra/flowctrl.h> - -#include <asm/cpuidle.h> -#include <asm/smp_plat.h> -#include <asm/suspend.h> - -#include "cpuidle.h" -#include "iomap.h" -#include "irq.h" -#include "pm.h" -#include "reset.h" -#include "sleep.h" - -#ifdef CONFIG_PM_SLEEP -static bool abort_flag; -static atomic_t abort_barrier; -static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index); -#define TEGRA20_MAX_STATES 2 -#else -#define TEGRA20_MAX_STATES 1 -#endif - -static struct cpuidle_driver tegra_idle_driver = { - .name = "tegra_idle", - .owner = THIS_MODULE, - .states = { - ARM_CPUIDLE_WFI_STATE_PWR(600), -#ifdef CONFIG_PM_SLEEP - { - .enter = tegra20_idle_lp2_coupled, - .exit_latency = 5000, - .target_residency = 10000, - .power_usage = 0, - .flags = CPUIDLE_FLAG_COUPLED | - CPUIDLE_FLAG_TIMER_STOP, - .name = "powered-down", - .desc = "CPU power gated", - }, -#endif - }, - .state_count = TEGRA20_MAX_STATES, - .safe_state_index = 0, -}; - -#ifdef CONFIG_PM_SLEEP -#ifdef CONFIG_SMP -static int tegra20_reset_sleeping_cpu_1(void) -{ - int ret = 0; - - tegra_pen_lock(); - - if (readb(tegra20_cpu1_resettable_status) == CPU_RESETTABLE) - tegra20_cpu_shutdown(1); - else - ret = -EINVAL; - - tegra_pen_unlock(); - - return ret; -} - -static void tegra20_wake_cpu1_from_reset(void) -{ - tegra_pen_lock(); - - tegra20_cpu_clear_resettable(); - - /* enable cpu clock on cpu */ - tegra_enable_cpu_clock(1); - - /* take the CPU out of reset */ - tegra_cpu_out_of_reset(1); - - /* unhalt the cpu */ - flowctrl_write_cpu_halt(1, 0); - - tegra_pen_unlock(); -} - -static int tegra20_reset_cpu_1(void) -{ - if (!cpu_online(1) || !tegra20_reset_sleeping_cpu_1()) - return 0; - - tegra20_wake_cpu1_from_reset(); - return -EBUSY; -} -#else -static inline void tegra20_wake_cpu1_from_reset(void) -{ -} - -static inline int tegra20_reset_cpu_1(void) -{ - return 0; -} -#endif - -static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - while (tegra20_cpu_is_resettable_soon()) - cpu_relax(); - - if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready()) - return false; - - tegra_idle_lp2_last(); - - if (cpu_online(1)) - tegra20_wake_cpu1_from_reset(); - - return true; -} - -#ifdef CONFIG_SMP -static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - cpu_suspend(0, tegra20_sleep_cpu_secondary_finish); - - tegra20_cpu_clear_resettable(); - - return true; -} -#else -static inline bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - return true; -} -#endif - -static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - bool entered_lp2 = false; - - if (tegra_pending_sgi()) - WRITE_ONCE(abort_flag, true); - - cpuidle_coupled_parallel_barrier(dev, &abort_barrier); - - if (abort_flag) { - cpuidle_coupled_parallel_barrier(dev, &abort_barrier); - abort_flag = false; /* clean flag for next coming */ - return -EINTR; - } - - local_fiq_disable(); - - tegra_set_cpu_in_lp2(); - cpu_pm_enter(); - - if (dev->cpu == 0) - entered_lp2 = tegra20_cpu_cluster_power_down(dev, drv, index); - else - entered_lp2 = tegra20_idle_enter_lp2_cpu_1(dev, drv, index); - - cpu_pm_exit(); - tegra_clear_cpu_in_lp2(); - - local_fiq_enable(); - - smp_rmb(); - - return entered_lp2 ? index : 0; -} -#endif - -/* - * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether - * they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around - * this, simply disable LP2 if the PCI driver and DT node are both enabled. - */ -void tegra20_cpuidle_pcie_irqs_in_use(void) -{ - pr_info_once( - "Disabling cpuidle LP2 state, since PCIe IRQs are in use\n"); - cpuidle_driver_state_disabled(&tegra_idle_driver, 1, true); -} - -int __init tegra20_cpuidle_init(void) -{ - return cpuidle_register(&tegra_idle_driver, cpu_possible_mask); -} diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c deleted file mode 100644 index c6128526877d..000000000000 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ /dev/null @@ -1,132 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * CPU idle driver for Tegra CPUs - * - * Copyright (c) 2010-2012, NVIDIA Corporation. - * Copyright (c) 2011 Google, Inc. - * Author: Colin Cross <ccross@android.com> - * Gary King <gking@nvidia.com> - * - * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> - */ - -#include <linux/clk/tegra.h> -#include <linux/tick.h> -#include <linux/cpuidle.h> -#include <linux/cpu_pm.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <asm/cpuidle.h> -#include <asm/smp_plat.h> -#include <asm/suspend.h> - -#include "cpuidle.h" -#include "pm.h" -#include "sleep.h" - -#ifdef CONFIG_PM_SLEEP -static int tegra30_idle_lp2(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index); -#endif - -static struct cpuidle_driver tegra_idle_driver = { - .name = "tegra_idle", - .owner = THIS_MODULE, -#ifdef CONFIG_PM_SLEEP - .state_count = 2, -#else - .state_count = 1, -#endif - .states = { - [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), -#ifdef CONFIG_PM_SLEEP - [1] = { - .enter = tegra30_idle_lp2, - .exit_latency = 2000, - .target_residency = 2200, - .power_usage = 0, - .flags = CPUIDLE_FLAG_TIMER_STOP, - .name = "powered-down", - .desc = "CPU power gated", - }, -#endif - }, -}; - -#ifdef CONFIG_PM_SLEEP -static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - /* All CPUs entering LP2 is not working. - * Don't let CPU0 enter LP2 when any secondary CPU is online. - */ - if (num_online_cpus() > 1 || !tegra_cpu_rail_off_ready()) { - cpu_do_idle(); - return false; - } - - tegra_idle_lp2_last(); - - return true; -} - -#ifdef CONFIG_SMP -static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - smp_wmb(); - - cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - - return true; -} -#else -static inline bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - return true; -} -#endif - -static int tegra30_idle_lp2(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - bool entered_lp2 = false; - bool last_cpu; - - local_fiq_disable(); - - last_cpu = tegra_set_cpu_in_lp2(); - cpu_pm_enter(); - - if (dev->cpu == 0) { - if (last_cpu) - entered_lp2 = tegra30_cpu_cluster_power_down(dev, drv, - index); - else - cpu_do_idle(); - } else { - entered_lp2 = tegra30_cpu_core_power_down(dev, drv, index); - } - - cpu_pm_exit(); - tegra_clear_cpu_in_lp2(); - - local_fiq_enable(); - - smp_rmb(); - - return (entered_lp2) ? index : 0; -} -#endif - -int __init tegra30_cpuidle_init(void) -{ - return cpuidle_register(&tegra_idle_driver, NULL); -} diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c deleted file mode 100644 index d565c44cfc93..000000000000 --- a/arch/arm/mach-tegra/cpuidle.c +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-tegra/cpuidle.c - * - * CPU idle driver for Tegra CPUs - * - * Copyright (c) 2010-2012, NVIDIA Corporation. - * Copyright (c) 2011 Google, Inc. - * Author: Colin Cross <ccross@android.com> - * Gary King <gking@nvidia.com> - * - * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include <soc/tegra/fuse.h> - -#include "cpuidle.h" - -void __init tegra_cpuidle_init(void) -{ - switch (tegra_get_chip_id()) { - case TEGRA20: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) - tegra20_cpuidle_init(); - break; - case TEGRA30: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) - tegra30_cpuidle_init(); - break; - case TEGRA114: - case TEGRA124: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || - IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) - tegra114_cpuidle_init(); - break; - } -} - -void tegra_cpuidle_pcie_irqs_in_use(void) -{ - switch (tegra_get_chip_id()) { - case TEGRA20: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) - tegra20_cpuidle_pcie_irqs_in_use(); - break; - } -} diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h deleted file mode 100644 index 4e1f459f5bd8..000000000000 --- a/arch/arm/mach-tegra/cpuidle.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. - */ - -#ifndef __MACH_TEGRA_CPUIDLE_H -#define __MACH_TEGRA_CPUIDLE_H - -#ifdef CONFIG_CPU_IDLE -int tegra20_cpuidle_init(void); -void tegra20_cpuidle_pcie_irqs_in_use(void); -int tegra30_cpuidle_init(void); -int tegra114_cpuidle_init(void); -void tegra_cpuidle_init(void); -void tegra_cpuidle_pcie_irqs_in_use(void); -#else -static inline void tegra_cpuidle_init(void) {} -static inline void tegra_cpuidle_pcie_irqs_in_use(void) {} -#endif - -#endif diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index ace7a390b5fe..4e1ee70b2a3f 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -18,9 +18,10 @@ #include <linux/of.h> #include <linux/syscore_ops.h> +#include <soc/tegra/irq.h> + #include "board.h" #include "iomap.h" -#include "irq.h" #define SGI_MASK 0xFFFF diff --git a/arch/arm/mach-tegra/irq.h b/arch/arm/mach-tegra/irq.h deleted file mode 100644 index 7a94cf121448..000000000000 --- a/arch/arm/mach-tegra/irq.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. - */ - -#ifndef __TEGRA_IRQ_H -#define __TEGRA_IRQ_H - -bool tegra_pending_sgi(void); - -#endif diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 3cab81b82866..d1e1a61b12cf 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -110,7 +110,7 @@ static void suspend_cpu_complex(void) flowctrl_cpu_suspend_enter(cpu); } -void tegra_clear_cpu_in_lp2(void) +void tegra_pm_clear_cpu_in_lp2(void) { int phy_cpu_id = cpu_logical_map(smp_processor_id()); u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; @@ -123,11 +123,9 @@ void tegra_clear_cpu_in_lp2(void) spin_unlock(&tegra_lp2_lock); } -bool tegra_set_cpu_in_lp2(void) +void tegra_pm_set_cpu_in_lp2(void) { int phy_cpu_id = cpu_logical_map(smp_processor_id()); - bool last_cpu = false; - cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask; u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; spin_lock(&tegra_lp2_lock); @@ -135,22 +133,15 @@ bool tegra_set_cpu_in_lp2(void) BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id))); *cpu_in_lp2 |= BIT(phy_cpu_id); - if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask)) - last_cpu = true; - else if (tegra_get_chip_id() == TEGRA20 && phy_cpu_id == 1) - tegra20_cpu_set_resettable_soon(); - spin_unlock(&tegra_lp2_lock); - return last_cpu; -} - -int tegra_cpu_do_idle(void) -{ - return cpu_do_idle(); } static int tegra_sleep_cpu(unsigned long v2p) { + if (tegra_cpu_car_ops->rail_off_ready && + WARN_ON(!tegra_cpu_rail_off_ready())) + return -EBUSY; + /* * L2 cache disabling using kernel API only allowed when all * secondary CPU's are offline. Cache have to be disabled with @@ -159,9 +150,10 @@ static int tegra_sleep_cpu(unsigned long v2p) * if any of secondary CPU's is online and this is the LP2-idle * code-path only for Tegra20/30. */ - if (trusted_foundations_registered()) - outer_disable(); - +#ifdef CONFIG_OUTER_CACHE + if (trusted_foundations_registered() && outer_cache.disable) + outer_cache.disable(); +#endif /* * Note that besides of setting up CPU reset vector this firmware * call may also do the following, depending on the FW version: @@ -202,14 +194,16 @@ static void tegra_pm_set(enum tegra_suspend_mode mode) tegra_pmc_enter_suspend_mode(mode); } -void tegra_idle_lp2_last(void) +int tegra_pm_enter_lp2(void) { + int err; + tegra_pm_set(TEGRA_SUSPEND_LP2); cpu_cluster_pm_enter(); suspend_cpu_complex(); - cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + err = cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); /* * Resume L2 cache if it wasn't re-enabled early during resume, @@ -221,6 +215,8 @@ void tegra_idle_lp2_last(void) restore_cpu_complex(); cpu_cluster_pm_exit(); + + return err; } enum tegra_suspend_mode tegra_pm_validate_suspend_mode( @@ -365,7 +361,7 @@ static int tegra_suspend_enter(suspend_state_t state) tegra_suspend_enter_lp1(); break; case TEGRA_SUSPEND_LP2: - tegra_set_cpu_in_lp2(); + tegra_pm_set_cpu_in_lp2(); break; default: break; @@ -386,7 +382,7 @@ static int tegra_suspend_enter(suspend_state_t state) tegra_suspend_exit_lp1(); break; case TEGRA_SUSPEND_LP2: - tegra_clear_cpu_in_lp2(); + tegra_pm_clear_cpu_in_lp2(); break; default: break; @@ -436,4 +432,18 @@ void __init tegra_init_suspend(void) suspend_set_ops(&tegra_suspend_ops); } + +int tegra_pm_park_secondary_cpu(unsigned long cpu) +{ + if (cpu > 0) { + tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS); + + if (tegra_get_chip_id() == TEGRA20) + tegra20_hotplug_shutdown(); + else + tegra30_hotplug_shutdown(); + } + + return -EINVAL; +} #endif diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 569151b3edc0..81525f5f4a44 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -23,10 +23,6 @@ void tegra20_sleep_core_init(void); void tegra30_lp1_iram_hook(void); void tegra30_sleep_core_init(void); -void tegra_clear_cpu_in_lp2(void); -bool tegra_set_cpu_in_lp2(void); -int tegra_cpu_do_idle(void); -void tegra_idle_lp2_last(void); extern void (*tegra_tear_down_cpu)(void); #ifdef CONFIG_PM_SLEEP diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index e3f34815c9da..53123ae4ac3b 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -183,17 +183,6 @@ after_errata: bleq __die @ CPU not present (to OS) #endif -#ifdef CONFIG_ARCH_TEGRA_2x_SOC - /* Are we on Tegra20? */ - cmp r6, #TEGRA20 - bne 1f - /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov r0, #CPU_NOT_RESETTABLE - cmp r10, #0 - strbne r0, [r12, #RESET_DATA(RESETTABLE_STATUS)] -1: -#endif - /* Waking up from LP1? */ ldr r8, [r12, #RESET_DATA(MASK_LP1)] tst r8, r11 @ if in_lp1 diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index a4cfc08159f6..51265592cb1a 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -16,9 +16,8 @@ #define TEGRA_RESET_STARTUP_SECONDARY 3 #define TEGRA_RESET_STARTUP_LP2 4 #define TEGRA_RESET_STARTUP_LP1 5 -#define TEGRA_RESET_RESETTABLE_STATUS 6 -#define TEGRA_RESET_TF_PRESENT 7 -#define TEGRA_RESET_DATA_SIZE 8 +#define TEGRA_RESET_TF_PRESENT 6 +#define TEGRA_RESET_DATA_SIZE 7 #define RESET_DATA(x) ((TEGRA_RESET_##x)*4) @@ -42,10 +41,6 @@ void __tegra_cpu_reset_handler_end(void); (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \ (u32)__tegra_cpu_reset_handler_start))) -#define tegra20_cpu1_resettable_status \ - (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ - ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_RESETTABLE_STATUS] - \ - (u32)__tegra_cpu_reset_handler_start))) #endif #define tegra_cpu_reset_handler_offset \ diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 9a89f30d53ca..0e00ba8cf646 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -43,9 +43,6 @@ #define APB_MISC_XM2CFGCPADCTRL2 0x8e4 #define APB_MISC_XM2CFGDPADCTRL2 0x8e8 -#define __tegra20_cpu1_resettable_status_offset \ - (__tegra_cpu_reset_handler_data_offset + RESET_DATA(RESETTABLE_STATUS)) - .macro pll_enable, rd, r_car_base, pll_base ldr \rd, [\r_car_base, #\pll_base] tst \rd, #(1 << 30) @@ -90,10 +87,6 @@ ENDPROC(tegra20_hotplug_shutdown) ENTRY(tegra20_cpu_shutdown) cmp r0, #0 reteq lr @ must not be called for CPU 0 - mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT - ldr r2, =__tegra20_cpu1_resettable_status_offset - mov r12, #CPU_RESETTABLE - strb r12, [r1, r2] cpu_to_halt_reg r1, r0 ldr r3, =TEGRA_FLOW_CTRL_VIRT @@ -117,107 +110,6 @@ ENDPROC(tegra20_cpu_shutdown) #ifdef CONFIG_PM_SLEEP /* - * tegra_pen_lock - * - * spinlock implementation with no atomic test-and-set and no coherence - * using Peterson's algorithm on strongly-ordered registers - * used to synchronize a cpu waking up from wfi with entering lp2 on idle - * - * The reference link of Peterson's algorithm: - * http://en.wikipedia.org/wiki/Peterson's_algorithm - * - * SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm) - * on cpu 0: - * r2 = flag[0] (in SCRATCH38) - * r3 = flag[1] (in SCRATCH39) - * on cpu1: - * r2 = flag[1] (in SCRATCH39) - * r3 = flag[0] (in SCRATCH38) - * - * must be called with MMU on - * corrupts r0-r3, r12 - */ -ENTRY(tegra_pen_lock) - mov32 r3, TEGRA_PMC_VIRT - cpu_id r0 - add r1, r3, #PMC_SCRATCH37 - cmp r0, #0 - addeq r2, r3, #PMC_SCRATCH38 - addeq r3, r3, #PMC_SCRATCH39 - addne r2, r3, #PMC_SCRATCH39 - addne r3, r3, #PMC_SCRATCH38 - - mov r12, #1 - str r12, [r2] @ flag[cpu] = 1 - dsb - str r12, [r1] @ !turn = cpu -1: dsb - ldr r12, [r3] - cmp r12, #1 @ flag[!cpu] == 1? - ldreq r12, [r1] - cmpeq r12, r0 @ !turn == cpu? - beq 1b @ while !turn == cpu && flag[!cpu] == 1 - - ret lr @ locked -ENDPROC(tegra_pen_lock) - -ENTRY(tegra_pen_unlock) - dsb - mov32 r3, TEGRA_PMC_VIRT - cpu_id r0 - cmp r0, #0 - addeq r2, r3, #PMC_SCRATCH38 - addne r2, r3, #PMC_SCRATCH39 - mov r12, #0 - str r12, [r2] - ret lr -ENDPROC(tegra_pen_unlock) - -/* - * tegra20_cpu_clear_resettable(void) - * - * Called to clear the "resettable soon" flag in IRAM variable when - * it is expected that the secondary CPU will be idle soon. - */ -ENTRY(tegra20_cpu_clear_resettable) - mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT - ldr r2, =__tegra20_cpu1_resettable_status_offset - mov r12, #CPU_NOT_RESETTABLE - strb r12, [r1, r2] - ret lr -ENDPROC(tegra20_cpu_clear_resettable) - -/* - * tegra20_cpu_set_resettable_soon(void) - * - * Called to set the "resettable soon" flag in IRAM variable when - * it is expected that the secondary CPU will be idle soon. - */ -ENTRY(tegra20_cpu_set_resettable_soon) - mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT - ldr r2, =__tegra20_cpu1_resettable_status_offset - mov r12, #CPU_RESETTABLE_SOON - strb r12, [r1, r2] - ret lr -ENDPROC(tegra20_cpu_set_resettable_soon) - -/* - * tegra20_cpu_is_resettable_soon(void) - * - * Returns true if the "resettable soon" flag in IRAM variable has been - * set because it is expected that the secondary CPU will be idle soon. - */ -ENTRY(tegra20_cpu_is_resettable_soon) - mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT - ldr r2, =__tegra20_cpu1_resettable_status_offset - ldrb r12, [r1, r2] - cmp r12, #CPU_RESETTABLE_SOON - moveq r0, #1 - movne r0, #0 - ret lr -ENDPROC(tegra20_cpu_is_resettable_soon) - -/* * tegra20_sleep_core_finish(unsigned long v2p) * * Enters suspend in LP0 or LP1 by turning off the mmu and jumping to @@ -243,68 +135,6 @@ ENTRY(tegra20_sleep_core_finish) ENDPROC(tegra20_sleep_core_finish) /* - * tegra20_sleep_cpu_secondary_finish(unsigned long v2p) - * - * Enters WFI on secondary CPU by exiting coherency. - */ -ENTRY(tegra20_sleep_cpu_secondary_finish) - stmfd sp!, {r4-r11, lr} - - mrc p15, 0, r11, c1, c0, 1 @ save actlr before exiting coherency - - /* Flush and disable the L1 data cache */ - mov r0, #TEGRA_FLUSH_CACHE_LOUIS - bl tegra_disable_clean_inv_dcache - - mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT - ldr r4, =__tegra20_cpu1_resettable_status_offset - mov r3, #CPU_RESETTABLE - strb r3, [r0, r4] - - bl tegra_cpu_do_idle - - /* - * cpu may be reset while in wfi, which will return through - * tegra_resume to cpu_resume - * or interrupt may wake wfi, which will return here - * cpu state is unchanged - MMU is on, cache is on, coherency - * is off, and the data cache is off - * - * r11 contains the original actlr - */ - - bl tegra_pen_lock - - mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT - ldr r4, =__tegra20_cpu1_resettable_status_offset - mov r3, #CPU_NOT_RESETTABLE - strb r3, [r0, r4] - - bl tegra_pen_unlock - - /* Re-enable the data cache */ - mrc p15, 0, r10, c1, c0, 0 - orr r10, r10, #CR_C - mcr p15, 0, r10, c1, c0, 0 - isb - - mcr p15, 0, r11, c1, c0, 1 @ reenable coherency - - /* Invalidate the TLBs & BTAC */ - mov r1, #0 - mcr p15, 0, r1, c8, c3, 0 @ invalidate shared TLBs - mcr p15, 0, r1, c7, c1, 6 @ invalidate shared BTAC - dsb - isb - - /* the cpu was running with coherency disabled, - * caches may be out of date */ - bl v7_flush_kern_cache_louis - - ldmfd sp!, {r4 - r11, pc} -ENDPROC(tegra20_sleep_cpu_secondary_finish) - -/* * tegra20_tear_down_cpu * * Switches the CPU cluster to PLL-P and enters sleep. diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 02cc6ff96f30..e7bcf7dc4675 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -265,11 +265,11 @@ ENTRY(tegra30_sleep_core_finish) ENDPROC(tegra30_sleep_core_finish) /* - * tegra30_sleep_cpu_secondary_finish(unsigned long v2p) + * tegra30_pm_secondary_cpu_suspend(unsigned long unused_arg) * * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU. */ -ENTRY(tegra30_sleep_cpu_secondary_finish) +ENTRY(tegra30_pm_secondary_cpu_suspend) mov r7, lr /* Flush and disable the L1 data cache */ @@ -281,7 +281,7 @@ ENTRY(tegra30_sleep_cpu_secondary_finish) bl tegra30_cpu_shutdown mov r0, #1 @ never return here ret r7 -ENDPROC(tegra30_sleep_cpu_secondary_finish) +ENDPROC(tegra30_pm_secondary_cpu_suspend) /* * tegra30_tear_down_cpu diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 78ef32a907c8..4718a3cb45a1 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -114,29 +114,14 @@ .endm #else -void tegra_pen_lock(void); -void tegra_pen_unlock(void); void tegra_resume(void); int tegra_sleep_cpu_finish(unsigned long); void tegra_disable_clean_inv_dcache(u32 flag); -#ifdef CONFIG_HOTPLUG_CPU void tegra20_hotplug_shutdown(void); void tegra30_hotplug_shutdown(void); -#endif - -void tegra20_cpu_shutdown(int cpu); -int tegra20_cpu_is_resettable_soon(void); -void tegra20_cpu_clear_resettable(void); -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -void tegra20_cpu_set_resettable_soon(void); -#else -static inline void tegra20_cpu_set_resettable_soon(void) {} -#endif -int tegra20_sleep_cpu_secondary_finish(unsigned long); void tegra20_tear_down_cpu(void); -int tegra30_sleep_cpu_secondary_finish(unsigned long); void tegra30_tear_down_cpu(void); #endif diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index e512e606eabd..f1ce2857a251 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -36,13 +36,12 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach-types.h> +#include <asm/psci.h> #include <asm/setup.h> #include "board.h" #include "common.h" -#include "cpuidle.h" #include "iomap.h" -#include "irq.h" #include "pm.h" #include "reset.h" #include "sleep.h" @@ -86,7 +85,6 @@ static void __init tegra_dt_init(void) static void __init tegra_dt_init_late(void) { tegra_init_suspend(); - tegra_cpuidle_init(); if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && of_machine_is_compatible("compal,paz00")) @@ -95,6 +93,9 @@ static void __init tegra_dt_init_late(void) if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && of_machine_is_compatible("nvidia,tegra20")) platform_device_register_simple("tegra20-cpufreq", -1, NULL, 0); + + if (IS_ENABLED(CONFIG_ARM_TEGRA_CPUIDLE) && !psci_smp_available()) + platform_device_register_simple("tegra-cpuidle", -1, NULL, 0); } static const char * const tegra_dt_board_compat[] = { diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 3a4248fd7962..a9dd2f71cd19 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -12,10 +12,10 @@ #include <linux/cpumask.h> #include <linux/platform_device.h> #include <linux/clk.h> -#include <linux/clk-provider.h> #include <linux/clk/zynq.h> #include <linux/clocksource.h> #include <linux/of_address.h> +#include <linux/of_clk.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/of.h> diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index ffb93db68e9c..509d4824dc1c 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -177,12 +177,6 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction orion_timer_irq = { - .name = "orion_tick", - .flags = IRQF_TIMER, - .handler = orion_timer_interrupt -}; - void __init orion_time_set_base(void __iomem *_timer_base) { @@ -236,7 +230,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask, /* * Setup clockevent timer (interrupt-driven). */ - setup_irq(irq, &orion_timer_irq); + if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick", + NULL)) + pr_err("Failed to request irq %u (orion_tick)\n", irq); orion_clkevt.cpumask = cpumask_of(0); clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe); } diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 76778b2f520d..55d70cfe0f9e 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -39,7 +39,6 @@ config ARCH_BCM2835 select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 - select HAVE_ARM_ARCH_TIMER help This enables support for the Broadcom BCM2837 and BCM2711 SoC. These SoCs are used in the Raspberry Pi 3 and 4 devices. @@ -301,7 +300,6 @@ config ARCH_ZX config ARCH_ZYNQMP bool "Xilinx ZynqMP Family" - select ZYNQMP_FIRMWARE help This enables support for Xilinx ZynqMP Family |