summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
AgeCommit message (Collapse)Author
2024-02-19arm64: dts: amlogic: replace underscores in node namesKrzysztof Kozlowski
Underscores should not be used in node names (dtc with W=2 warns about them), so replace them with hyphens. Cc: Marc Gonzalez <mgonzalez@freebox.fr> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240213143217.336341-1-krzysztof.kozlowski@linaro.org Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-12-19arm64: dts: amlogic: drop redundant status=okayKrzysztof Kozlowski
New device nodes are enabled by default, so no need for status=okay. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231209124401.93814-1-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-07-31arm64: dts: amlogic: drop redundant status=okay in sound nodesKrzysztof Kozlowski
status=okay is by default. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230731093615.148949-1-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-02-04arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610Christian Hewitt
The BL32/TEE reserved-memory region is now inherited from the common family dtsi (meson-g12-common) so we can drop it from board files. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com
2021-09-21arm64: dts: meson-g12a: Fix the pwm regulator supply propertiesAnand Moon
After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs. Changes help link VDDCPU pwm regulator to 12V regulator supply instead of dummy regulator. [ 11.602281] pwm-regulator regulator-vddcpu: Looking up pwm-supply property in node /regulator-vddcpu failed [ 11.602344] VDDCPU: supplied by regulator-dummy [ 11.602365] regulator-dummy: could not add device link regulator.11: -ENOENT [ 11.602548] VDDCPU: 721 <--> 1022 mV at 1022 mV, enabled Fixes: e9bc0765cc12 ("arm64: dts: meson-g12a: enable DVFS on G12A boards") Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210919202918.3556-2-linux.amoon@gmail.com
2021-02-03arm64: dts: meson: shorten audio card names for alsa compatibilityChristian Hewitt
This patch shortens all audio card model names by dropping the SoC prefix (for conformity) and rewording those that are still longer than alsa's 15 character name limit [0] to avoid userspace config issues. [0] https://github.com/torvalds/linux/blob/master/Documentation/sound/alsa-configuration.rst#common-parameters-for-top-sound-card-modules Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210101063737.26635-1-christianshewitt@gmail.com
2020-03-17arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus widthNeil Armstrong
The Khadas VIM3 shares the eMMC pins 4 to 7 with the SPI NOR, in order to enable the eMMC and the SPI NOR interface, we need to omit the 4 last pins from the eMMC pinctrl. As it was done for the Khadas VIM2, split the eMMC pinctrls in ctrl, data and ds pins with either 4bits data or 8bits data, and update the current board accordingly. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200313090713.15147-2-narmstrong@baylibre.com
2020-02-29arm64: dts: meson: sei510: fix sound card codec nodeJerome Brunet
A codec node of the sei510 sound card is numbered with the pattern codec@XX. This pattern should be used only if there is a reg property in the node which is not case here. Change this to something acceptable. This change is only to better comply with the DT spec. No functional changes expected. Fixes: 64c10554bf9c ("arm64: dts: meson: sei510: add sound card") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200224150812.263980-4-jbrunet@baylibre.com
2019-10-03arm64: dts: meson-g12a-sei510: add keep-power-in-suspend property in SDIO nodeNeil Armstrong
The WiFi firmware requires that the power is kept enabled while in suspend mode. Add the keep-power-in-suspend property in the SDIO node to specify that the power must be kept when entering in a system wide suspend state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-09arm64: dts: meson-g12a: enable DVFS on G12A boardsNeil Armstrong
Enable DVFS for the U200, SEI520 and X96-Max Amlogic G12A based board by setting the clock, OPP and supply for each CPU cores. The CPU cluster power supply can achieve 0.73V to 1.01V using a PWM output clocked at 800KHz with an inverse duty-cycle. DVFS has been tested by running the arm64 cpuburn at [1] and cycling between all the possible cpufreq translations and checking the final frequency using the clock-measurer, script at [2]. [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-05arm64: dts: meson-g12a-sei510: enable IR controllerNeil Armstrong
Enable the IR receiver controller on the SEI510 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-14arm64: dts: meson: sei510: add sound cardJerome Brunet
Enable the sound card on the sei510: * TDM interface A is connected to an external DAC and a speaker installed on the device. * HDMI is expected to use TDM B. It can also use TDM A but will be limited to 2 channels, as accepted by the external DAC. * 2 Built in PDM mics through the PDM interface. * Both TDM outputs may use HW loopback. The internal DAC connected to audio jack will be added later on, when driver support is added. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-14arm64: dts: meson: sei510: add max98357a DACMaxime Jourdan
The SEI510 board features a max98357a audio codec for built-in speaker Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11arm64: dts: meson-g12a-sei510: bump bluetooth bus speed to 2Mbaud/sNeil Armstrong
Setting to 2Mbaud/s is the nominal bus speed for common usages. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth nodeNeil Armstrong
The 32k low power clock is necessary for the bluetooth part of the combo module to initialize correctly, simply add the same clock we use for the sdio pwrseq. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11arm64: dts: meson-g12a-sei510: Enable Wifi SDIO moduleNeil Armstrong
The SEI510 embeds an AP6398S SDIO module, let's add the corresponding SDIO, PWM clock and mmc-pwrseq nodes. Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-06-11arm64: dts: meson: sei510: add network supportJerome Brunet
Enable the network interface of the SEI510 which use the internal PHY. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson: sei510: add bluetooth suppliesJerome Brunet
Add bluetooth vbat and vddio power supplies Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson: sei510: enable i2c3Jerome Brunet
Add the i2c bus used for RGB led controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson: sei510: add sd and emmcJerome Brunet
Enable eMMC and SDCard on the g12a sei510 board Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson: sei510: consistently order nodesJerome Brunet
Like order boards, order nodes by address then node names then aliases. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-04-16arm64: dts: meson-g12a-sei510: Add support for Video DisplayNeil Armstrong
This patch adds the HDMI, CVBS and CEC attributes and nodes to support full display on the SEI510 STB. AO-CEC-B is used by default and AO-CEC-A is disabled. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-04-15arm64: dts: meson-g12a-sei510: Enable USBNeil Armstrong
Enable the USB2 and USB3 Host ports on the SEI520 Set-Top-Box. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-04-15arm64: dts: meson-g12a-sei510: Add ADC Key and BT supportNeil Armstrong
Add support for the : - ADC Touch key - Bluetooth Module on UART A Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-03-22arm64: dts: meson-g12a-sei510: add regulatorsJerome Brunet
Add some regulators. Still missing * VDD_EE (0.8V - PWM controlled) * VDD_CPU(PWM controlled) * VDDQ1_5 Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-03-22arm64: dts: meson-g12a-sei510: add uart_AO pinctrlNeil Armstrong
Add pinctrl on the always-enabled debug UART AO. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-03-18arm64: dts: Add SEI Robotics SEI510 BoardNeil Armstrong
The SEI Robotics SEI510 Board is based on the Amlogic G12A S905X2 and has the following features : - Amlogic G12A S905X2 SoC - 10/100 Ethernet - USB2 + USB3 ports - Micro SDCard Port - Audio + CVBS AV Jack port - HDMI 2.1 + CEC Port - ADC Touch Button - Far-Field Microphone Array + Mono HP - IR Sensor - IR Emmiter LED Array - RGB Led Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [khilman: sorted Makefile entry alphabetcially] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
generated by cgit (git 2.34.1) at 2024-06-15 13:29:59 +0000