Age | Commit message (Collapse) | Author |
|
Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
because it is not totally dominated by new Qualcomm hardware support.
Instead, we larger than average updates for Rockchips, NXP, Allwinner
and TI. The only two new SoCs this time are both from NXP and are
minor variants of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out
fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console and a
few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines"
* tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits)
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
arm64: dts: marvell: eDPU: drop redundant address/size-cells
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: Add/fix /memory node unit-addresses
arm64: dts: qcom: qcs404: fix bluetooth device address
arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
...
|
|
Bluetooth is not a random device connected to the MMC/SD controller. It
is function 2 of the SDIO device.
Fix the address of the bluetooth node. Also fix the node name and drop
the label.
Fixes: 055ef10ccdd4 ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The "arm,armv8-pmuv3" compatible is intended only for s/w models. Primarily,
it doesn't provide any detail on uarch specific events.
There's still remaining cases for CPUs without any corresponding PMU
definition and for big.LITTLE systems which only have a single PMU node
(there should be one per core type).
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://lore.kernel.org/r/20240417203853.3212103-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
1. Fixup infracfg clock controller binding
It also acts as reset controller so #reset-cells is required.
2. Use -pins suffix for pinctrl
This fixes:
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: syscon@10001000: '#reset-cells' is a required property
from schema $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: pinctrl@1000b000: 'eth_default', 'eth_sleep', 'usb0_iddig', 'usb1_iddig' do not match any of the regexes: 'pinctrl-[0-9]+', 'pins$'
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240301074741.8362-1-zajec5@gmail.com
[Angelo: Added Fixes tags]
Fixes: 5d4839709c8e ("arm64: dts: mt2712: Add clock controller device nodes")
Fixes: 1724f4cc5133 ("arm64: dts: Add USB3 related nodes for MT2712")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: thermal-zones: cpu-thermal:cooling-maps: 'cpu-active-high', 'cpu-active-low', 'cpu-active-med' do not match any of the regexes: '^map[-a-zA-Z0-9]*$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
Fixes: c26f779a2295 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts")
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213061459.17917-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Thermal block uses only two clocks. Its binding doesn't document or
allow "adc_32k". Also Linux driver doesn't support it.
It has been additionally verified by Angelo by his detailed research on
MT7981 / MT7986 clocks (thanks!).
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: thermal@1100c800: clocks: [[4, 27], [4, 44], [4, 45]] is too long
from schema $id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: thermal@1100c800: clock-names: ['therm', 'auxadc', 'adc_32k'] is too long
from schema $id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
Fixes: 0a9615d58d04 ("arm64: dts: mt7986: add thermal and efuse")
Cc: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/linux-devicetree/17d143aa-576e-4d67-a0ea-b79f3518b81c@collabora.com/
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213053739.14387-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Ethernet block doesn't include or act as a reset controller.
Documentation also doesn't document "#reset-cells" for it.
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: ethernet@15100000: Unevaluated properties are not allowed ('#reset-cells' was unexpected)
from schema $id: http://devicetree.org/schemas/net/mediatek,net.yaml#
Fixes: 082ff36bd5c0 ("arm64: dts: mediatek: mt7986: introduce ethernet nodes")
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213053739.14387-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Mediatek ethsys controller / syscon binding doesn't allow any subnodes
so "#address-cells" and "#size-cells" are redundant (actually:
disallowed).
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: syscon@15000000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/clock/mediatek,ethsys.yaml#
Fixes: 1f9986b258c2 ("arm64: dts: mediatek: add clock support for mt7986a")
Cc: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213053739.14387-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Binding doesn't specify "reset-names" property and Linux driver also
doesn't use it.
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: thermal@1100b000: Unevaluated properties are not allowed ('reset-names' was unexpected)
from schema $id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
Fixes: ae457b7679c4 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-5-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: ethernet@1b100000: compatible: ['mediatek,mt7622-eth', 'mediatek,mt2701-eth', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/net/mediatek,net.yaml#
(and other complains about wrong clocks).
Fixes: 5f599b3a0bb8 ("arm64: dts: mt7622: add ethernet device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-4-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Fix following validation error:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: cir@10009000: $nodename:0: 'cir@10009000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$'
from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#
Fixes: ae457b7679c4 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
1. Drop unneeded "syscon"s (bindings were updated recently)
2. Use "clock-controller" in nodenames
3. Add missing "#clock-cells"
Fixes: d7167881e03e ("arm64: dts: mt7622: add clock controller device nodes")
Fixes: e9b65ecb7c30 ("arm64: dts: mediatek: mt7622: introduce nodes for Wireless Ethernet Dispatch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240317221050.18595-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The requested voltage could be lower than the minimum voltage on the
GPU OPP table when the MTK Smart Voltage Scaling (SVS) driver is
enabled, so update the minimum voltage constraint from 600000 uV to
500000 uV as listed on the mt6366 datasheet.
Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-5-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The requested voltage could be lower than the minimum voltage on the
GPU OPP table when the MTK Smart Voltage Scaling (SVS) driver is
enabled, so removing the definition in mt8183-kukui to use the default
minimum voltage (500000 uV) defined in mt6358.dtsi.
Fixes: 31c6732da9d5 ("arm64: dts: mediatek: mt8183-kukui: Override vgpu/vsram_gpu constraints")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-4-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Update the minimum voltage from 300000 uV to 400000 uV so it matches
the MT6315 datasheet.
Also update the minimum voltage for Vgpu regulator from 625000 uV to
400000 uV because the requested voltage could be lower than the minimum
voltage on the GPU OPP table when the MTK Smart Voltage Scaling (SVS)
driver is enabled.
Fixes: 260c04d425eb ("arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-3-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Update the minimum voltage from 300000 uV to 400000 uV so it matches
the MT6315 datasheet.
Also update the minimum voltage for Vgpu regulator from 606250 uV to
400000 uV because the requested voltage could be lower than the minimum
voltage on the GPU OPP table when the MTK Smart Voltage Scaling (SVS)
driver is enabled.
Fixes: 3183cb62b033 ("arm64: dts: mediatek: asurada: Add SPMI regulators")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240315111621.2263159-2-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Describe in each CPU node the regulator supplying it.
Fixes: 260c04d425eb ("arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240110142305.755367-2-nfraprado@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the missing mediatek,gce-client-reg property to the mutex1 node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.
Fixes: 92d2c23dc269 ("arm64: dts: mt8195: add display node for vdosys1")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-4-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the missing mediatek,gce-client-reg property to the mutex node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.
Fixes: b852ee68fd72 ("arm64: dts: mt8195: Add display node for vdosys0")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-3-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the missing mediatek,gce-client-reg property to the vppsys and
vdosys nodes to allow them to use the GCE. This prevents the "can't
parse gce-client-reg property" error from being printed and should
result in better performance.
Fixes: 6aa5b46d1755 ("arm64: dts: mt8195: Add vdosys and vppsys clock nodes")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-2-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the missing mediatek,gce-client-reg property to the mutex node to
allow it to use the GCE. This prevents the "can't parse gce-client-reg
property" error from being printed and should result in better
performance.
Fixes: b4b75bac952b ("arm64: dts: mt8192: Add display nodes")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240229-gce-client-reg-add-missing-mt8192-95-v1-1-b12c233a8a33@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
mfgcfg clock is under MFG_ASYNC power domain.
Fixes: e526c9bc11f8 ("arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile")
Fixes: 37fb78b9aeb7 ("arm64: dts: mediatek: Add mt8183 power domains controller")
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240223091122.2430037-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.9
This adds support for the following new machines:
- MT7981B: Xiaomi AX3000T
- MT7986A: Acelink EW-7886CAX
- MT7988A: BananaPi BPI-R4
- MT8186 Chromebooks: Tentacruel, Tentacool, Steelix, Rusty, Magneton
- MT8395/MT8195: Radxa NIO 12L
Also adds more support for the MediaTek MT8186 SoC's Video and JPEG
encoders and for MT7988 clocks, enables wakeup support for the CrOS
EC on SPI in all MediaTek Chromebooks, performs some cleanups and
includes some spare fixes.
* tag 'mtk-dts64-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (51 commits)
arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow
arm64: dts: mt7986: add port@5 as CPU port
arm64: dts: mt7622: add port@5 as CPU port
arm64: dts: mediatek: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
arm64: dts: mediatek: replace underscores in node names
arm64: dts: mediatek: mt8186: Add missing xhci clock to usb controllers
arm64: dts: mediatek: mt8186: Add missing clocks to ssusb power domains
arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes
arm64: dts: mediatek: mt7986: reorder nodes
arm64: dts: mediatek: mt7986: reorder properties
arm64: dts: mediatek: Add Acelink EW-7886CAX
dt-bindings: arm64: dts: mediatek: Add Acelink EW-7886CAX access point
dt-bindings: vendor-prefixes: add acelink
arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board
dt-bindings: arm64: mediatek: Add MT8395 Radxa NIO 12L board compatible
arm64: dts: mediatek: mt8186: Add video decoder device nodes
arm64: dts: mediatek: mt8195: Add MTU3 nodes and correctly describe USB
arm64: dts: mediatek: Add MT8186 Magneton Chromebooks
arm64: dts: mediatek: Add MT8186 Steelix platform based Rusty
arm64: dts: mediatek: Introduce MT8186 Steelix
...
Link: https://lore.kernel.org/r/20240219131230.157792-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The dtc interrupt_provider warning is off by default. Fix all the warnings
so it can be enabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-3-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The external output reset signal was originally disabled and sent from
firmware. However, an unfixed bug in the firmware on tomato prevents
the signal from being sent, causing the device to fail to boot. To fix
this, enable external output reset signal to allow the device to reboot
normally.
Fixes: 5eb2e303ec6b ("arm64: dts: mediatek: Introduce MT8195 Cherry platform's Tomato")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240124-send-upstream-v3-1-5097c9862a73@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
On MediaTek MT7986b RFB and MediaTek MT7986a RFB, port 5 of the MT7531
switch is connected to the second MAC of the SoC as a CPU port. Add the
port and set up the second MAC on the bindings.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240219-for-mediatek-v1-2-7078f23eab82@arinc9.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
On Banana Pi BPI-R64 and MediaTek MT7622 RFB1 board, port 5 of the MT7531
switch is connected to the second MAC of the SoC as a CPU port. Add the
port and set up the second MAC on the bindings.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240219-for-mediatek-v1-1-7078f23eab82@arinc9.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
properties
Use id-gpios and vbus-gpios instead.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215093214.796821-3-alexander.stein@ew.tq-group.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240213144626.341463-1-krzysztof.kozlowski@linaro.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The mtu3 usb controllers don't list the xhci clock, though they require
it, and thus rely on the bootloader leaving it on in order to work.
When booting with the upstream arm64 defconfig, the usb controllers will
defer probe until modules have loaded since they have an indirect
dependency on CONFIG_MTK_CMDQ, which is configured as a module. However
at the point where modules are loaded, unused clocks are also disabled,
causing the usb controllers to probe without the xhci clock enabled and
fail to probe:
mtu3 11201000.usb: clks of sts1 are not stable!
mtu3 11201000.usb: device enable failed -110
mtu3 11201000.usb: mtu3 hw init failed:-110
mtu3 11201000.usb: failed to initialize gadget
mtu3: probe of 11201000.usb failed with error -110
(and same for the one at 11281000)
Add the missing clock for the usb controllers so that they can
successfully probe without relying on the bootloader state.
Fixes: f6c3e61c5486 ("arm64: dts: mediatek: mt8186: Add MTU3 nodes")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240213-mt8186-ssusb-domain-clk-fix-v2-2-1f981d35f3fd@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The ssusb power domains currently don't list any clocks, despite
depending on some, and thus rely on the bootloader leaving the required
clocks on in order to work.
When booting with the upstream arm64 defconfig, the power domain
controller will defer probe until modules have loaded since it has an
indirect dependency on CONFIG_MTK_CMDQ, which is configured as a module.
However at the point where modules are loaded, unused clocks are also
disabled, causing the ssusb domains to fail to be enabled and
consequently the controller to fail probe:
mtk-power-controller 10006000.syscon:power-controller: /soc/syscon@10006000/power-controller/power-domain@4: failed to power on domain: -110
mtk-power-controller: probe of 10006000.syscon:power-controller failed with error -110
Add the missing clocks for the ssusb power domains so that they can
successfully probe without relying on the bootloader state.
Fixes: d9e43c1e7a38 ("arm64: dts: mt8186: Add power domains controller")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240213-mt8186-ssusb-domain-clk-fix-v2-1-1f981d35f3fd@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This fixes:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: /: memory@40000000: 'device_type' is a required property
from schema $id: http://devicetree.org/schemas/memory.yaml#
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dtb: /: memory@40000000: 'device_type' is a required property
from schema $id: http://devicetree.org/schemas/memory.yaml#
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240122132357.31264-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Use order described as preferred in DTS Coding Style:
1. Sort bus nodes by unit address
2. Use alpha-numerical order for the rest
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240212121620.15035-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Use order described as preferred in DTS Coding Style. Mostly just move
"compatible", "reg" and "ranges" properties. In two nodes also move
vendor-prefixed props down.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20240212121620.15035-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Acelink EW-7886CAX is an MT7986A (AKA Filogic 830) based access point.
It has 512 MiB of RAM, one 2.5 Gbps PoE (802.3at) Ethernet port and
on-SoC Wi-Fi.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231207080512.3688-3-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add a device tree for the Radxa NIO 12L SBC, powered by the MediaTek
MT8395 Genio 1200 SoC.
This board features:
* MT6359 + MT6360 PMICs at I2C-6
- Regulators, battery charger, TypeC Port Controller Interface
- Audio through 3.5mm jack (2CH out, 1CH in)
* Two MT6315 PMICs over SPMI
- CPU-Big and GPU Core regulators
* Network Connectivity
- Realtek RTL8211FD MDIO PHY/Transceiver, 10/100/1000M Ethernet
- MT7921E WiFi (PCIe1) / Bluetooth (USB 2.0) combo chip
* Storage
- On-board UFS storage
- On-board eMMC on MMC0 controller
- MicroSD card slot on MMC1 controller
* Other connectivity
- 1x USB Type-C Charging/Power only port
- 1x USB 3.2 SuperSpeed Type-C OTG+DisplayPort mode
- Muxed by ITE IT5205 Alternate Mode Passive MUX
- 4x USB 3.0 Type-A ports on VL805 USB Hub (PCIe0)
- 1x HDMI IN port
- 1x HDMI OUT port
- 1x MIPI DSI (Display) port
- 2x MIPI CSI (Camera) ports
* 40-pin Expansion Header
- Two UART ports
- I2C, SPI busses
- I2S for external audio chips
- ADC
- GPIOs
Link: https://lore.kernel.org/r/20240202114821.79227-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add mt8186 video decoder device nodes.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
[eugen.hristev@collabora.com: minor cleanup]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231220133302.39411-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The MT8195 SoC has four USB controllers: only one is a direct path to
a XHCI controller, while the other three (0, 2 and 3) are behind the
MTU3 DRD controller instead!
Add the missing MTU3 nodes, default disabled, for controllers 0, 2 and
3 and move the related XHCI nodes to be children of their MTU3 DRD to
correctly describe the SoC.
In order to retain USB functionality on all of the MT8195 and MT8395
boards, also move the vusb33 supply and enable the relevant MTU3 nodes
with special attention to the MT8195 Cherry Chromebook, where it was
necessary to set the dr_mode of all MTU3 controllers to host to avoid
interfering with the EC performing DRD on its own.
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240115084336.938426-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add entries for the MT8186 based Chromebooks, also collectively known
as the Lenovo IdeaPad Slim 3 Chromebook (14M868). It is also based on
the "Steelix" design. Being a laptop instead of a convertible device,
there is no stylus, which is similar to Rusty. However Magneton does
not have ports on the right side of the device.
Three variants are listed separately. These use different touchscreen
controllers, or lack a touchscreen altogether.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-10-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
MT8186 Rusty, otherwise known as the Lenovo 100e Chromebook Gen 4, is an
MT8186 based laptop. It is based on the "Steelix" design. Being a laptop
instead of a convertible device, there is no touchscreen or stylus.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-9-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4,
is a convertible device based on a common design of the same name. The
device comes in different variants. Of them, whether a world facing
camera is integrated is the only differentiating factor between the
two device trees added. The different SKU IDs describe this alone.
The other device difference is the trackpad component used. This is
simply handled by having both possible components described in the
device tree, and letting the implementation figure out which one is
actually available. The system bootloader / firmware does not
differentiate this in that they share the same SKU IDs.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-8-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Tentacruel and Tentacool are MT8186 based Chromebooks based on the
Krabby design.
Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
convertible device with touchscreen and stylus.
Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
device. It does not have a touchscreen or stylus.
The two devices both have two variants. The difference is a second
source trackpad controller that shares the same address as the original,
but is incompatible.
The extra SKU IDs for the Tentacruel devices map to different sensor
components attached to the Embedded Controller. These are not visible
to the main processor.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240126083802.2728610-7-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add JPEG encoder node.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Max Staudt <mstaudt@chromium.org>
Tested-by: Max Staudt <mstaudt@chromium.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
[eugen.hristev@collabora.com: minor cleanup]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240127084258.68302-2-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add video encoder node.
Signed-off-by: Kyrie Wu <kyrie.wu@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
[eugen.hristev@collabora.com: minor cleanup]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231228113245.174706-7-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The larb clock is in fact a subsys clock, so it must be prefixed by
'subsys-' to be correctly identified in the driver.
Fixes: d9e43c1e7a38 ("arm64: dts: mt8186: Add power domains controller")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231228113245.174706-6-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Clock name should be `venc_sel` as per binding.
Fix the warning message :
arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dtb: vcodec@17020000: clock-names:0: 'venc_sel' was expected
from schema $id: http://devicetree.org/schemas/media/mediatek,vcodec-encoder.yaml#
Fixes: aa8f3711fc87 ("arm64: dts: mt8192: Add H264 venc device node")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231228113245.174706-4-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add efuse nodes for socinfo retrieval for MT8173, MT8183, MT8186,
MT8192 and MT8195.
Signed-off-by: William-tw Lin <william-tw.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231222080739.21706-2-william-tw.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The cros_ec driver currently assumes that cros-ec-spi compatible device
nodes are a wakeup-source even though the wakeup-source property is not
defined.
Some Chromebooks use a separate wake pin, while others overload the
interrupt for wake and IO. With the current assumption, spurious wakes
can occur on systems that use a separate wake pin. It is planned to
update the driver to no longer assume that the EC interrupt pin should
be enabled for wake.
Add the wakeup-source property to all cros-ec-spi compatible device
nodes to signify to the driver that they should still be a valid wakeup
source.
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240102140734.v4.12.Iee33a7f1f991408cef372744199026f936bf54e2@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The cros_ec driver currently assumes that cros-ec-spi compatible device
nodes are a wakeup-source even though the wakeup-source property is not
defined.
Some Chromebooks use a separate wake pin, while others overload the
interrupt for wake and IO. With the current assumption, spurious wakes
can occur on systems that use a separate wake pin. It is planned to
update the driver to no longer assume that the EC interrupt pin should
be enabled for wake.
Add the wakeup-source property to all cros-ec-spi compatible device
nodes to signify to the driver that they should still be a valid wakeup
source.
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240102140734.v4.11.Ibd330d26a00f5e219a7e448452769124833a9762@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The cros_ec driver currently assumes that cros-ec-spi compatible device
nodes are a wakeup-source even though the wakeup-source property is not
defined.
Some Chromebooks use a separate wake pin, while others overload the
interrupt for wake and IO. With the current assumption, spurious wakes
can occur on systems that use a separate wake pin. It is planned to
update the driver to no longer assume that the EC interrupt pin should
be enabled for wake.
Add the wakeup-source property to all cros-ec-spi compatible device
nodes to signify to the driver that they should still be a valid wakeup
source.
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240102140734.v4.10.Iba4a8b7e908989e57f7838a80013a4062be5e614@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|