| Age | Commit message (Collapse) | Author |
|---|
|
Move Intel PMC core driver to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210820110458.73018-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Substate priority levels are encoded in 4 bits in the LPM_PRI register.
This value was used as an index to an array whose element size was less
than 16, leading to the possibility of overflow should we read a larger
than expected priority. In addition to the overflow, bad values could lead
to incorrect state reporting. So rework the priority code to prevent the
overflow and perform some validation of the register. Use the priority
register values if they give an ordering of unique numbers between 0 and
the maximum number of states. Otherwise, use a default ordering instead.
Reported-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210814014728.520856-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Just like Ice Lake, Tiger Lake uses Cannon Lake's LTR information
and supports a few additional registers. Hence add the LTR registers
specific to Tiger Lake to the cnp_ltr_show_map[].
Also adjust the number of LTR IPs for Tiger Lake to the correct amount.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-9-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
By default the Low Power Mode (LPM or sub-state) status registers will
latch condition status on every entry into Package C10. This is
configurable in the PMC to allow latching on any achievable sub-state. Add
a debugfs file to support this.
Also add the option to clear the status registers to 0. Clearing the status
registers before testing removes ambiguity around when the current values
were set.
The new file, latch_lpm_mode, looks like this:
[c10] S0i2.0 S0i3.0 S0i2.1 S0i3.1 S0i3.2 clear
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-8-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Platforms that support low power modes (LPM) such as Tiger Lake maintain
requirements for each sub-state that a readable in the PMC. However, unlike
LPM status registers, requirement registers are not memory mapped but are
available from an ACPI _DSM. Collect the requirements for Tiger Lake using
the _DSM method and store in a buffer.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Co-developed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-6-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Modify the low power mode (LPM or sub-state) residency counters to display
in microseconds just like the slp_s0_residency counter. The granularity of
the counter is approximately 30.5us per tick. Double this value then divide
by two to maintain accuracy.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-5-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The current implementation of pmc_core_substate_res_show() is written
specifically for Tiger Lake. However, new platform will also have
sub-states and may support different modes. Therefore rewrite the code to
handle sub-states generically.
Obtain the number and type of enabled states form the PMC. Use the Low
Power Mode (LPM) priority register to store the states in order from
shallowest to deepest for displays. Add a for_each macro to simplify
this. While changing the sub-state display it makes sense to show only the
"enabled" sub-states instead of showing all possible ones. After this
patch, the debugfs file looks like this:
Substate Residency
S0i2.0 0
S0i3.0 0
S0i2.1 9329279
S0i3.1 0
S0i3.2 0
Suggested-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-4-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
sysfs file
During PCH (platform/board) manufacturing process a global platform
reset has to be induced in order for the configuration changes take
the effect upon following platform reset. This is an internal platform
state and is not intended to be used in the regular platform resets.
The setting is exposed via ETR3 (Extended Test Mode Register 3).
After the manufacturing process is completed the register cannot be
written anymore and is hardware locked.
This setting was commonly done by accessing PMC registers via /dev/mem
but due to security concerns /dev/mem access is much more restricted,
hence the reason for exposing this setting via the dedicated sysfs
interface.
To prevent post manufacturing abuse the register is protected
by hardware locking and the file is set to read-only mode via is_visible
handler.
The register in MMIO space is defined for Cannon Lake and newer PCHs.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: David E Box <david.e.box@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tamar Mashiah <tamar.mashiah@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210411141532.3004893-1-tomas.winkler@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
slp_s0 counter value displayed via debugfs interface is calculated by
multiplying the granularity for crystal oscillator tick as 100us with
the value read from using slp_s0 offset. But the granularity of the tick
varies from platform to platform and it needs to be fixed.
Hence, specify granularity of the tick for each platform, so that the
value of the slp_s0 counter is accurate.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201006224702.12697-4-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When both CONFIG_DEBUG_FS and CONFIG_PM_SLEEP are disabled, the
functions that got moved out of the #ifdef section now cause
a warning:
drivers/platform/x86/intel_pmc_core.c:654:13: error: 'pmc_core_lpm_display' defined but not used [-Werror=unused-function]
654 | static void pmc_core_lpm_display(struct pmc_dev *pmcdev, struct device *dev,
| ^~~~~~~~~~~~~~~~~~~~
drivers/platform/x86/intel_pmc_core.c:617:13: error: 'pmc_core_slps0_display' defined but not used [-Werror=unused-function]
617 | static void pmc_core_slps0_display(struct pmc_dev *pmcdev, struct device *dev,
| ^~~~~~~~~~~~~~~~~~~~~~
Rather than add even more #ifdefs here, remove them entirely and
let the compiler work it out, it can actually get rid of all the
debugfs calls without problems as long as the struct member is
there.
The two PM functions just need a __maybe_unused annotations to avoid
another warning instead of the #ifdef.
Fixes: aae43c2bcdc1 ("platform/x86: intel_pmc_core: Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Currently pmc_core_substate_res_show() uses array of char pointers
i.e., lpm_modes for Tiger Lake directly to iterate through and to get
the number of low power modes which is hardcoded and cannot be re-used
for future platforms that support sub-states. To maintain readability,
make pmc_core_substate_res_show() generic, so that it can re-used for
future platforms.
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
registers
Just like status registers, Tiger Lake has another set of 6 registers
that help with status of the low power mode requirements. They are
latched on every PC10 entry/exit and S0ix.y entry/exit as well.
Though status and live status registers show the status of same list
of requirements, live status registers show the status of the low power
mode requirements at the time of reading.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
registers
Tiger Lake has 6 status registers that are memory mapped. These
registers show the status of the low power mode requirements. The
registers are latched on every C10 entry or exit and on every s0ix.y
entry/exit. Accessing these registers is useful for debugging any low
power related activities.
Thus, add debugfs entry to access low power mode status registers.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Signed-off-by: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Prior to Tiger Lake, the platforms that support pmc_core have no
sub-states of S0ix. Tiger Lake has 8 sub-states/low power modes of S0ix
ranging from S0i2.0-S0i2.2 and S0i3.0-S0i3.4, simply represented as
S0ix.y.
Create a debugfs entry to access residency of each sub-state.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Signed-off-by: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This patch corrects the SPDX License Identifier style in
header files related to x86 Platform Specific Drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add Intel Tiger Lake to the list of the platforms that driver supports
for the PMC device.
Just like Ice Lake, Tiger Lake can also reuse all the Cannon Lake PCH
IPs. Since Tiger Lake has almost the same number of PCH IPs as Ice Lake,
reuse Ice Lake's PPFEAR_NUM_ENTRIES instead of defining a new macro.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: David E. Box <david.e.box@intel.com>
Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The current implementation of intel_pmc_core driver allows to reuse, but does
not reflect the exact number and names of IPs for a newer platform which
does not necessarily support all the IPs in the entries. The names and
number of these IPs might differ from its previous platforms. The number
of PCH IPs per platform is calculated based on PPFEAR_NUM_ENTRIES
defined, where each entry represents a bucket (8 bits). The platform can
support 'n' entries, but not necessarily all 'n * 8' IPs.
Create platform dependent bitmap structures to specify the exact number,
names of IPs while reusing the existing IPs.
The changes in this patch are preparatory to accommodate future SoCs
that might reuse the CNL/ICL PCH IPs, and to reflect the exact number of
IPs with its names.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: David E. Box <david.e.box@intel.com>
Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add a module parameter which when enabled, will check on resume, if the
last S0ix attempt was successful. If not, the driver would warn and provide
helpful debug information (which gets latched during the failed suspend
attempt) to debug the S0ix failure.
This information is very useful to debug S0ix failures. Specially since
the latched debug information will be lost (over-written) if the system
attempts to go into runtime (or imminent) S0ix again after that failed
suspend attempt.
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
On some platforms such as HP Elite-x2-1013-g3, the platform BIOS
enforces XTAL to remain off before S0ix state can be achieved. This may
not be optimum when we want to enable use cases like Low Power Audio,
Wake on Voice etc which always need 24mhz clock.
This introduces a new quirk to allow S0ix entry when all other
conditions except for XTAL clock are good on a given platform. The extra
power consumed by XTAL clock is about 2mw but it saves much more
platform power compared to the system that remains in just PC10.
Link: https://bit.ly/2UmnrFf
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201579
Tested-by: "David E. Box" <david.e.box@linux.intel.com>
Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
This patch introduces a new debugfs entry to read current Package
cstate residency counters. A similar variant of this patch was discussed
earlier "https://patchwork.kernel.org/patch/9908563/" but didn't make it
into mainline for various reasons. Current version only adds debugfs
entry which is quite useful for S0ix debug but excludes the exported API
that was there in initial version. Though there are tools like turbostat
and socwatch which can also show this info but sometimes its more
practical to have it here as it's hard to switch between various tools for
S0ix debug when pmc_core driver is the primary debug tool. Internal and
external customers have requested for this patch to be included in the
PMC driver on many occasions and Google Chrome OS team has already included
it in their builds. This becomes handy when requesting logs from external
customers who may not always have above mentioned tools in their integrated
kernel builds.
Package cstate residency MSRs provide useful debug information about
system idle states. In idle states system must enter deeper Package
cstates. Package cstates depend not only on Core cstates but also on
various IP block's power gating status and LTR values.
For Intel Core SoCs Package C10 entry is a must for deeper sleep states
such as S0ix. "Suspend-to-idle" should ideally take this path:
PC0 -> PC10 -> S0ix. For S0ix debug, its logical to check for
Package C10 residency first if for some reason system fails to enter S0ix.
Please refer to this link for MSR details:
https://software.intel.com/sites/default/files/managed/22/0d/335592-sdm-vol-4.pdf
Usage:
cat /sys/kernel/debug/pmc_core/package_cstate_show
Package C2 : 0xec2e21735f
Package C3 : 0xc30113ba4
Package C6 : 0x9ef4be15c5
Package C7 : 0x1e011904
Package C8 : 0x3c5653cfe5a
Package C9 : 0x0
Package C10 : 0x16fff4289
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-and-tested-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Icelake can resue most of the CNL PCH IPs as they are mostly similar.
This patch enables the PMC Core driver for ICL family.
It also addresses few other minor issues like upper case conversions and
some tab alignments.
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-and-tested-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Recently introduced commit "platform/x86: intel_pmc_core: Show Latency
Tolerance info <51337cd94d18184601ac0fb4cf1a02b8bbabc3d7> skipped the
LTR from a reserved IP. Though this doesn't cause any functional issue
but it is needed for the consumers of "ltr_ignore" as the index printing
for "ltr_show" is missing. For example, w/o this change, a user that wants
to ignore LTR from ME would do something like
echo 5 > ltr_ignore
but the index for ME is 6. Printing a reserved IP helps to properly
calculate LTR ignore offsets.
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
A previous commit "platform/x86: intel_pmc_core: Make the driver PCH
family agnostic <c977b98bbef5898ed3d30b08ea67622e9e82082a>" provided
better abstraction to this driver but has some fundamental issues.
e.g. the following condition
for (index = 0; index < pmcdev->map->ppfear_buckets &&
index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++)
is wrong because for CNL, PPFEAR_MAX_NUM_ENTRIES is hardcoded as 5 which
is _wrong_ and even though ppfear_buckets is 8, the loop fails to read
all eight registers needed for CNL PCH i.e. PPFEAR0 and PPFEAR1. This
patch refactors the pfear show logic to correctly read PCH IP power
gating status for Cannonlake and beyond.
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: c977b98bbef5 ("platform/x86: intel_pmc_core: Make the driver PCH family agnostic")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The LTR values follow PCIE LTR encoding format and can be decoded as per
https://pcisig.com/sites/default/files/specification_documents/ECN_LatencyTolnReporting_14Aug08.pdf
This adds support to translate the raw LTR values as read from the PMC
to meaningful values in nanosecond units of time.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Cannonlake PCH allows us to ignore LTR from more IPs than Sunrisepoint
PCH so make the LTR ignore platform specific.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This adds support to show the Latency Tolerance Reporting for the IPs on
the PCH as reported by the PMC. The format shown here is raw LTR data
payload that can further be decoded as per the PCI specification.
This also fixes some minor alignment issues in the header file by
removing spaces and converting to tabs at some places.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Reduce size of duplicated comments by switching to use SPDX identifier.
No functional change.
While here, correct MODULE_LICENSE() string to be aligned with license text.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Adds debugfs access to registers in the Cannon Point PCH PMC that are
useful for debugging #SLP_S0 signal assertion and other low power relate
activities. Device pm states are latched in these registers whenever the
package enters C10 and can be read from slp_s0_debug_status. The pm
states may also be latched by writing 1 to slp_s0_dbg_latch which will
immediately capture the current state on the next read of
slp_s0_debug_status.
Signed-off-by: Box, David E <david.e.box@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Intel CoffeeLake SoC uses CPU ID of KabyLake but has Cannonlake PCH, so in
this case PMC register details from Cannonlake PCH must be used.
In order to identify whether the given platform is Coffeelake, scan for the
Sunrisepoint PMC PCI Id.
KBL CPUID SPT PCIID
------------------------------------
KBL | Y | Y |
------------------------------------
CFL | Y | N |
------------------------------------
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This adds support for Cannonlake PCH which is used by Cannonlake and
Coffeelake SoCs.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The Only use of PCI device enumeration here is to get the PMC base address
which is a fixed value i.e. 0xFE000000. On some platforms this can be read
through a non standard PCI BAR. But after Kabylake, PMC is not exposed as a
PCI device anymore. There are other non standard methods like ACPI LPIT
which can also be used for obtaining this value.
For simplicity, this value can be hardcoded as it won't change.
Since we don't have a PMC PCI device on any platform after Kabylake, this
creates a foundation for future SoC support.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Fix invalid field information and add missing fields in kernel doc comments.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
base_address field is redundant and unused in the driver so get rid of it.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Though ChromeOs uses the exported API as part of their S0ix failsafe
mechanism, there is no active consumer of this API in upstream kernel.
We can revisit this when ChromeOs kernel team is able to get their S0ix
failsafe framework in mainline.
Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Rajat Jain <rajatja@google.com>
Link: https://patchwork.kernel.org/patch/9831229/
Suggested-by: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Although this driver did pretty good job in abstracting PCH specific
interfaces, but still there are some loose ends. For example
SLP_S0 counter (for reading SLP_S0 residency), PM config offset (for
checking permissions to read XRAM) and PPFEAR offset (for reading IP
status) is still hardcoded for a specific family of PCH.
This change extended the struct pmc_reg_map to allow per family
configuration of offsets and bits.
No functional change is expected with this change. This change allows
seamless additions to new PCH and create a baseline for other platform
specific extensions.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
SPT LTR_IGN register provides a means to make the PMC ignore the LTR values
reported by the individual PCH devices.
echo <IP Offset> > /sys/kernel/debug/pmc_core/ltr_ignore.
When a particular IP Offset bit is set the PMC will ignore the LTR value
reported by the corresponding IP when the PMC performs the latency
coalescing.
IP Offset IP Name
0 SPA
1 SPB
2 SATA
3 GBE
4 XHCI
5 RSVD
6 ME
7 EVA
8 SPC
9 Azalia/ADSP
10 RSVD
11 LPSS
12 SPD
13 SPE
14 Camera
15 ESPI
16 SCC
17 ISH
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
[dvhart: pmc_core_ltr_ignore_write local declaration order cleanup]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
ModPhy Common lanes can provide the clock gating status for the important
system PLLs such as Gen2 USB3PCIE2 PLL, DMIPCIE3 PLL, SATA PLL and MIPI
PLL.
On SPT, in addition to the crystal oscillator clock, the 100Mhz Gen2
USB3PCI2 PLL clock is used as the PLL reference clock and Gen2 PLL idling
is a necessary condition for the platform to go into low power states like
PC10 and S0ix.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The PCH implements a number of High Speed I/O (HSIO) lanes that are split
between PCIe*, USB 3.0, SATA, GbE, USB OTG and SSIC. This patch shows the
current power gating status of the available ModPhy Core lanes. This is
done by sending a message to the PMC (MTPMC) that contains the XRAM
register offset for the MPHY_CORE_STS_0 and MPHY_CORE_STS_1 and then by
reading the response sent by the PMC (MFPMC).
While enabling low power modes we often encounter situations when the
ModPhy lanes are not power gated and it becomes hard to debug which lane is
active and which is not in the absence of an external hardware debugger
(JTAG/ITP). This patch eliminates the dependency on an external hardware
debugger for reading the ModPhy Lanes power gating status.
This patch requires PMC_READ_DISABLE setting to be disabled in the platform
bios.
cat /sys/kernel/debug/pmc_core/mphy_lanes_power_gating_status
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch adds the support for reading the power gating status of various
devices present on Sunrise Point PCH. This is intended to be used for
debugging purpose while tuning the platform for power optimizations and
also to understand which devices (on PCH) are blocking the system to enter
a low power state.
Power Management Controller on Sunrise Point PCH provides access to "PGD
PFET Enable Ack Status Registers (ppfear)". This patch reads and decodes
this register and dumps the output in formatted manner showing various
devices present on the PCH and their "Power Gating" status.
Further documentation can be found in Intel 7th Gen Core family mobile u/y
processor io datasheet volume 2.
Sample output (stripped and not in order):
cat /sys/kernel/debug/pmc_core/pch_ip_power_gating_status
PMC State: Not Power gated
OPI-DMI State: Not Power gated
XHCI State: Power gated
LPSS State: Power gated
CSME_PSF State: Not power gated
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
On Sunrise Point PCH, the Power Management Controller provides 4K bytes of
memory space for various power management and debug registers. This fix is
needed to access power management & debug registers that are mapped at a
higher offset.
Also, this provides a fix for correctly masking the PWRMBASE as the initial
bits (0-11) are reserved.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Refactor the code to use the recently introduced
DEFINE_DEBUGFS_ATTRIBUTE() macro to eliminate boilerplate code.
Make the absence of DEBUG_FS a non-fatal error.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch adds the Power Management Controller driver as a PCI driver
for Intel Core SoC architecture.
This driver can utilize debugging capabilities and supported features
as exposed by the Power Management Controller.
Please refer to the below specification for more details on PMC features.
http://www.intel.in/content/www/in/en/chipsets/100-series-chipset-datasheet-vol-2.html
The current version of this driver exposes SLP_S0_RESIDENCY counter.
This counter can be used for detecting fragile SLP_S0 signal related
failures and take corrective actions when PCH SLP_S0 signal is not
asserted after kernel freeze as part of suspend to idle flow
(echo freeze > /sys/power/state).
Intel Platform Controller Hub (PCH) asserts SLP_S0 signal when it
detects favorable conditions to enter its low power mode. As a
pre-requisite the SoC should be in deepest possible Package C-State
and devices should be in low power mode. For example, on Skylake SoC
the deepest Package C-State is Package C10 or PC10. Suspend to idle
flow generally leads to PC10 state but PC10 state may not be sufficient
for realizing the platform wide power potential which SLP_S0 signal
assertion can provide.
SLP_S0 signal is often connected to the Embedded Controller (EC) and the
Power Management IC (PMIC) for other platform power management related
optimizations.
In general, SLP_S0 assertion == PC10 + PCH low power mode + ModPhy Lanes
power gated + PLL Idle.
As part of this driver, a mechanism to read the SLP_S0_RESIDENCY is exposed
as an API and also debugfs features are added to indicate SLP_S0 signal
assertion residency in microseconds.
echo freeze > /sys/power/state
wake the system
cat /sys/kernel/debug/pmc_core/slp_s0_residency_usec
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Vishwanath Somayaji <vishwanath.somayaji@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
